Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a or D ≤ 200 mm

This document specifies the requirements relating to:
Heat resisting alloy X4NiCrMoTi43-13
As forged
Forging stock
a or D ≤ 200 mm
for aerospace applications.
ASD-STAN designation: FE-PA2501.

Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrMoTi43-13 - Schmiedezustand - Schmiedevormaterial - a oder D ≤ 200 mm

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung X4NiCrMoTi43 13
Schmiedezustand
Schmiedevormaterial
a oder D ≤ 200 mm
für Anwendungen in der Luft  und Raumfahrt fest.
ASD STAN Bezeichnung: FE PA2501.

Série aérospatiale - Alliage résistant à chaud X4NiCrMoTi43-13 - Brut de forge - Produits destinés à la forge - a ou D ≤ 200 mm

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud X4NiCrMoTi43-13
Brut de forge
Produits destinés à la forge
a ou D ≤ 200 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PA2501.

Aeronavtika - Toplotno odporna zlitina X4NiCrMoTi43-13 - Toplotno neobdelana (nekovana) - Kovni material - a ali D ≤ 200 mm

General Information

Status
Published
Publication Date
25-Feb-2020
Withdrawal Date
30-Aug-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Feb-2020
Completion Date
26-Feb-2020

Buy Standard

Standard
EN 4264:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2020
Aeronavtika - Toplotno odporna zlitina X4NiCrMoTi43-13 - Toplotno neobdelana
(nekovana) - Kovni material - a ali D ≤ 200 mm
Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 - As forged - Forging stock - a
or D ≤ 200 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung X4NiCrMoTi43-13 - Nicht
wärmebehandelt - Schmiedevormaterial - a oder D ≤ 200 mm
Série aérospatiale - Alliage résistant à chaud X4NiCrMoTi43-13 - Brut de forge - Produits
destinés à la forge - a ou D ≤ 200 mm
Ta slovenski standard je istoveten z: EN 4264:2020
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4264
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 49.025.05
English Version
Aerospace series - Heat resisting alloy X4NiCrMoTi43-13 -
As forged - Forging stock - a or D ≤ 200 mm
Série aérospatiale - Alliage résistant à chaud Luft- und Raumfahrt - Hochwarmfeste Legierung
X4NiCrMoTi43-13 - Brut de forge - Produits destinés à X4NiCrMoTi43-13 - Nicht wärmebehandelt -
la forge - a ou D ≤ 200 mm Schmiedevormaterial - a oder D ≤ 200 mm
This European Standard was approved by CEN on 8 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4264:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

European foreword
This document (EN 4264:2020) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall be
withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.