EN 10210-1:1994
(Main)Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements
Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements
This European Standard covers hot finished structural hollow sections in thicknesses up to and including 65 mm of circular, square or rectangular form and applies to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische Lieferbedingungen
Diese Europäische Norm enthält die Anforderungen an warmgefertigte Stahlbau-Hohlprofile mit kreisförmigem, quadratischem oder rechteckigem Querschnitt in Wanddicken bis 65 mm; sie gilt für mit oder ohne nachfolgende Wärmebehandlung warmgefertigte Hohlprofile sowie für kaltgefertigte Hohlprofile, die anschliessend wärmebehandelt wurden, um eine ähnliche metallurgische Beschaffenheit wie bei den warmgefertigten Erzeugnissen zu erzielen.
Profils creux pour la construction finis à chaud en aciers de construction non alliés et à grains fins - Partie 1: Conditions techniques de livraison
La présente norme européenne traite des profils creux finis à chaud, d'épaisseur inférieure ou égale à 65 mm, de forme circulaire, carrée ou rectangulaire, formés à chaud avec ou sans traitement thermique ou formés à froid avec traitement thermique consécutif au formage afin d'obtenir un état métallurgique équivalent à celui des produits formés à chaud.
Vroče valjani votli profili iz nelegiranih in drobnozrnatih konstrukcijskih jekel - 1. del: Tehnični dobavni pogoji
General Information
- Status
- Withdrawn
- Publication Date
- 14-Mar-1994
- Withdrawal Date
- 25-Apr-2006
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10/SC 1 - Structural steel - Hollow sections
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 26-Apr-2006
- Completion Date
- 26-Apr-2006
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10210-1:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements". This standard covers: This European Standard covers hot finished structural hollow sections in thicknesses up to and including 65 mm of circular, square or rectangular form and applies to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
This European Standard covers hot finished structural hollow sections in thicknesses up to and including 65 mm of circular, square or rectangular form and applies to hollow sections formed hot with or without subsequent heat treatment or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
EN 10210-1:1994 is classified under the following ICS (International Classification for Standards) categories: 77.140.75 - Steel pipes and tubes for specific use. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10210-1:1994 has the following relationships with other standards: It is inter standard links to EN 10210-1:2006, CR 10313:2000, EN 1993-1-1:2005, EN 1993-1-8:2005, EN 14015:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10210-1:1994 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10210-1:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgefertigte Hohlprofile für den Stahlbau aus unlegierten Baustählen und aus Feinkornbaustählen - Teil 1: Technische LieferbedingungenProfils creux pour la construction finis a chaud en aciers de construction non alliés et a grains fins - Partie 1: Conditions techniques de livraisonHot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements77.140.70Jekleni profiliSteel profiles77.140.45Nelegirana jeklaNon-alloyed steelsICS:Ta slovenski standard je istoveten z:EN 10210-1:1994SIST EN 10210-1:1997en01-december-1997SIST EN 10210-1:1997SLOVENSKI
STANDARD
S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...