Information technology - Security techniques - Vulnerability disclosure (ISO/IEC 29147:2018)

This document provides requirements and recommendations to vendors on the disclosure of vulnerabilities in products and services. Vulnerability disclosure enables users to perform technical vulnerability management as specified in ISO/IEC 27002:2013, 12.6.1[1]. Vulnerability disclosure helps users protect their systems and data, prioritize defensive investments, and better assess risk. The goal of vulnerability disclosure is to reduce the risk associated with exploiting vulnerabilities. Coordinated vulnerability disclosure is especially important when multiple vendors are affected. This document provides:
—          guidelines on receiving reports about potential vulnerabilities;
—          guidelines on disclosing vulnerability remediation information;
—          terms and definitions that are specific to vulnerability disclosure;
—          an overview of vulnerability disclosure concepts;
—          techniques and policy considerations for vulnerability disclosure;
—          examples of techniques, policies (Annex A), and communications (Annex B).
Other related activities that take place between receiving and disclosing vulnerability reports are described in ISO/IEC 30111.
This document is applicable to vendors who choose to practice vulnerability disclosure to reduce risk to users of vendors' products and services.

Informationstechnik - Sicherheitstechniken - Offenlegung von Schwachstellen (ISO/IEC 29147:2018)

Technologies de l'information - Techniques de sécurité - Divulgation de vulnérabilité (ISO/IEC 29147:2018)

Le présent document fournit des exigences et des recommandations à l'attention de fournisseurs concernant la divulgation de vulnérabilités dans des produits et services. La divulgation de vulnérabilité permet aux utilisateurs d'effectuer une gestion des vulnérabilités techniques telle que spécifiée dans l'ISO/IEC 27002:2013, 12.6.1[1]. La divulgation de vulnérabilité aide les utilisateurs à protéger leurs systèmes et données, à prioriser les investissements défensifs et à mieux apprécier le risque. L'objectif d'une divulgation de vulnérabilité est de réduire le risque associé à l'exploitation de vulnérabilités. Une divulgation de vulnérabilité coordonnée est particulièrement importante lorsque plusieurs fournisseurs sont affectés. Le présent document fournit:
—          des lignes directrices sur la réception de signalements concernant des vulnérabilités potentielles;
—          des lignes directrices sur la divulgation d'informations concernant la remédiation de vulnérabilités;
—          des termes et définitions spécifiques à la divulgation de vulnérabilités;
—          une vue d'ensemble des concepts associés à la divulgation de vulnérabilité;
—          des considérations relatives aux techniques et politiques de divulgation de vulnérabilité;
—          des exemples de techniques, de politiques (Annexe A) et de communications (Annexe B).
D'autres activités associées intervenant entre la réception et la divulgation de signalements de vulnérabilités sont décrites dans l'ISO/IEC 30111.
Le présent document s'applique aux fournisseurs qui choisissent de pratiquer la divulgation de vulnérabilité pour réduire le risque pour les utilisateurs de produits et services de fournisseurs.

Informacijska tehnologija - Varnostne tehnike - Razkritje ranljivosti (ISO/IEC 29147:2018)

General Information

Status
Published
Publication Date
26-May-2020
Withdrawal Date
29-Nov-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-May-2020
Due Date
31-Oct-2021
Completion Date
27-May-2020

Buy Standard

Standard
EN ISO/IEC 29147:2020
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2020
Informacijska tehnologija - Varnostne tehnike - Razkritje ranljivosti (ISO/IEC
29147:2018)
Information technology - Security techniques - Vulnerability disclosure (ISO/IEC
29147:2018)
Informationstechnik - Sicherheitstechniken - Bekanntgabe von Sicherheitslücken
(ISO/IEC 29147:2018)
Technologies de l'information - Techniques de sécurité - Divulgation de vulnérabilité
(ISO/IEC 29147:2018)
Ta slovenski standard je istoveten z: EN ISO/IEC 29147:2020
ICS:
35.030 Informacijska varnost IT Security
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO/IEC 29147
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2020
ICS 35.030
English version
Information technology - Security techniques -
Vulnerability disclosure (ISO/IEC 29147:2018)
Technologies de l'information - Techniques de sécurité Informationstechnik - Sicherheitstechniken -
- Divulgation de vulnérabilité (ISO/IEC 29147:2018) Offenlegung von Schwachstellen (ISO/IEC
29147:2018)
This European Standard was approved by CEN on 3 May 2020.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN ISO/IEC 29147:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Contents Page
European foreword . 3

European foreword
The text of ISO/IEC 29147:2018 has been prepared by Technical Committee ISO/IEC JTC 1 "Information
technology” of the International Organization for Standardization (ISO) and has been taken over as
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO/IEC 29147:2018 has been approved by CEN as EN ISO/IEC 29147:2020 without any
modification.
INTERNATIONAL ISO/IEC
STANDARD 29147
Second edition
2018-10
Information technology — Security
techniques — Vulnerability disclosure
Technologies de l'information — Techniques de sécurité —
Divulgation de vulnérabilité
Reference number
ISO/IEC 29147:2018(E)
©
ISO/IEC 2018
ISO/IEC 29147:2018(E)
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

ISO/IEC 29147:2018(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 3
5 Concepts . 3
5.1 General . 3
5.2 Structure of this document . 3
5.3 Relationships to other International Standards . 4
5.3.1 ISO/IEC 30111 . 4
5.3.2 ISO/IEC 27002 . 5
5.3.3 ISO/IEC 27034 series . . 6
5.3.4 ISO/IEC 27036-3 . 6
5.3.5 ISO/IEC 27017 . 6
5.3.6 ISO/IEC 27035 series . . 6
5.3.7 Security evaluation, testing and specification . 6
5.4 Systems, components, and services . 6
5.4.1 Systems . 6
5.4.2 Components . 6
5.4.3 Products . 6
5.4.4 Services . 7
5.4.5 Vulnerability . 7
5.4.6 Product interdependency. 7
5.5 Stakeholder roles . 8
5.5.1 General. 8
5.5.2 User . 8
5.5.3 Vendor . 8
5.5.4 Reporter . 8
5.5.5 Coordinator . 9
5.6 Vulnerability handling process summary . 9
5.6.1 General. 9
5.6.2 Preparation .10
5.6.3 Receipt .10
5.6.4 Verification .11
5.6.5 Remediation development .11
5.6.6 Release .11
5.6.7 Post-release .12
5.6.8 Embargo period .12
5.7 Information exchange during vulnerability disclosure.12
5.8 Confidentiality of exchanged information .13
5.8.1 General.13
5.8.2 Secure communications .13
5.9 Vulnerability advisories .13
5.10 Vulnerability exploitation .14
5.11 Vulnerabilities and risk .14
6 Receiving vulnerability reports .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.