EN 326-3:1998
(Main)Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels
This European Standard specifies methods for the verification of compliance of one or more properties of a consignment of panels with the requirements of a contract, or with the claimed values of properties of panels in a consignment as documented by the supplier. This European Standard is not applicable for the internal or external control of conformity of products in the factory. For these purposes, prEN 326-2 applies. In this standard, verification of compliance is based on the testing of small test pieces.
Holzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 3: Abnahmeprüfung einer Plattenlieferung
Diese Europäische Norm legt Verfahren fest zum Nachweis der Übereinstimmung von einer oder mehreren Eigenschaften einer Plattenlieferung mit den vertraglich vereinbarten Anforderungen, oder mit den vom Lieferanten angegebenen Werten. Diese Europäische Norm gilt nicht für die Eigen- und Fremdüberwachung von Erzeugnissen in der Fertigung. Hierfür gilt prEN 326-2. In dieser Norm erfolgt der Nachweis der Übereinstimmung anhand der Prüfung kleiner Prüfkörper.
Panneaux à base de bois - Echantillonnage, découpe et contrôle - Partie 3: Contrôle d'une livraison de panneaux
La présente norme européenne prescrit des méthodes pour la vérification de la conformité d'une ou plusieurs caractéristiques d'une livraison de panneaux, par rapport aux exigences d'un contrat ou aux valeurs annoncées pour les caractéristiques des panneaux d'une livraison, telles que données par le fournisseur. La présente norme européenne n'est pas applicable au contrôle interne ou externe de conformité des produits en usine. A cet effet, le prEN 326-2 s'applique. Dans la présente norme, la vérification de la conformité est basée sur l'essai de petites éprouvettes.
Lesne plošče - Vzorčenje, izžagovanje in kontrola - 3. del: Kontrola dostavljenih plošč
General Information
- Status
- Withdrawn
- Publication Date
- 18-Aug-1998
- Withdrawal Date
- 18-Nov-2003
- Technical Committee
- CEN/TC 112 - Woodbased panels
- Drafting Committee
- CEN/TC 112/WG 4 - Test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-Nov-2003
- Completion Date
- 19-Nov-2003
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
EN 326-3:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignment of panels". This standard covers: This European Standard specifies methods for the verification of compliance of one or more properties of a consignment of panels with the requirements of a contract, or with the claimed values of properties of panels in a consignment as documented by the supplier. This European Standard is not applicable for the internal or external control of conformity of products in the factory. For these purposes, prEN 326-2 applies. In this standard, verification of compliance is based on the testing of small test pieces.
This European Standard specifies methods for the verification of compliance of one or more properties of a consignment of panels with the requirements of a contract, or with the claimed values of properties of panels in a consignment as documented by the supplier. This European Standard is not applicable for the internal or external control of conformity of products in the factory. For these purposes, prEN 326-2 applies. In this standard, verification of compliance is based on the testing of small test pieces.
EN 326-3:1998 is classified under the following ICS (International Classification for Standards) categories: 79.060.01 - Wood-based panels in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 326-3:1998 has the following relationships with other standards: It is inter standard links to EN 326-3:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 326-3:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 326-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORãþHolzwerkstoffe - Probenahme, Zuschnitt und Überwachung - Teil 3: Abnahmeprüfung einer PlattenlieferungPanneaux a base de bois - Echantillonnage, découpe et contrôle - Partie 3: Contrôle d'une livraison de panneauxWood-based panels - Sampling, cutting and inspection - Part 3: Inspection of a consignm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...