EN 1301-3:1997
(Main)Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
This part of prEN 1301 specifies the tolerances on dimensions of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets), covering diameters, thicknesses or width across flats up to and including 20 mm. It applies to cold drawn wires, but not to drawing stock and drawn wire for welding and electrical purposes.
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 3: Grenzabmaße
Dieser Teil der prEN 1301 legt die Grenzabmasse für gezogene Drähte aus Aluminium und Aluminium-Knetlegierungen für allgemeine Anwendungen einschliesslich der Nietherstellung (mit Ausnahme der Nieten für dir Luftfahrt-technick) fest, und gilt für Durchmesser, Dicken oder Schlüsselweiten bis 20 mm. Er gilt für kaltgezogenen Draht, aber nicht für Vordraht oder gezogenen Draht für elektrotechnische oder schweisstechnische Anwendungen.
Aluminium et alliages d'aluminium - Fil étiré - Partie 3: Tolérances sur dimensions
La présente Partie de prEN 1301 spécifie les tolérances dimensionnelles du fil tréfilé en aluminium ou en alliage d'aluminium corroyé destiné à des mécaniques incluant la fabrication des rivets (à l'exception des rivets utilisés en aéronautique) et correspondant à des diamètres, des épaisseurs ou des largeurs entre plats inférieures ou égales à 20 mm. Elle ne s'applique qu'au fil tréfilé à froid; elle ne couvre pas le fil machine ou le fil tréfilé utilisé en électricité ou en soudage.
Aluminij in aluminijeve zlitine - Vlečena žica - 3. del: Odstopki mer
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 16-Sep-2008
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 4 - Wires and drawing stock
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Sep-2008
- Completion Date
- 17-Sep-2008
Relations
- Replaced By
EN 1301-3:2008 - Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions - Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 1301-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions". This standard covers: This part of prEN 1301 specifies the tolerances on dimensions of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets), covering diameters, thicknesses or width across flats up to and including 20 mm. It applies to cold drawn wires, but not to drawing stock and drawn wire for welding and electrical purposes.
This part of prEN 1301 specifies the tolerances on dimensions of aluminium and aluminium alloy drawn wire of general engineering applications including rivet manufacture (except aeronautical rivets), covering diameters, thicknesses or width across flats up to and including 20 mm. It applies to cold drawn wires, but not to drawing stock and drawn wire for welding and electrical purposes.
EN 1301-3:1997 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1301-3:1997 has the following relationships with other standards: It is inter standard links to EN 1301-3:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1301-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH9OHþHQDåLFDGHO 2GVWRSNLPHU
Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 3: Grenzabmaße
Aluminium et alliages d'aluminium - Fil étiré - Pa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...