Chemicals used for treatment of swimming pool water - Sodium hydroxide

This European Standard is applicable to sodium hydroxide solution used directly or for the production of formulations for treating swimming pool water. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium hydroxide. It gives information on its use for treating swimming pool water and determines the rules relating to safe handling and use (see Annex B).

Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumhydroxid

Diese Europäische Norm gilt für Natriumhydroxid-Lösung, die direkt zur Aufbereitung von Schwimm- und Badebeckenwasser oder zum Herstellen von Zubereitungen für diesen Zweck verwendet wird. Sie beschreibt die Eigenschaften von Natriumhydroxid und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Natriumhydroxid fest. Sie enthält Angaben zur Anwendung von Natriumhydroxid in der Aufbereitung von Schwimm- und Badebeckenwasser und legt Regeln für die sichere Handhabung und Verwendung fest (siehe Anhang B).

Produits chimiques utilisés pour le traitement de l'eau des piscines - Hydroxyde de sodium

La présente Norme européenne est applicable à l'hydroxyde de sodium en solution utilisé directement ou pour la préparation de formulations pour traiter les eaux de piscines. Elle décrit les caractéristiques et spécifie les exigences et les méthodes d’essais correspondantes applicables à l’hydroxyde de sodium. Elle donne des informations pour son emploi pour traiter les eaux de piscines et fixe les règles relatives à la sécurité d’emploi et de manipulation (voir Annexe B).

Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev hidroksid

Ta evropski standard se uporablja za raztopino natrijevega hidroksida, ki se lahko uporablja neposredno ali za izdelavo komercialnih oblik za pripravo bazenske vode. Opisuje značilnosti natrijevega hidroksida ter določa zahteve in ustrezne preskusne metode zanj. Podaja informacije za uporabo natrijevega hidroksida pri pripravi bazenske vode in določa pravila za varno ravnanje in uporabo (glej dodatek B).

General Information

Status
Published
Publication Date
21-May-2013
Withdrawal Date
29-Nov-2013
ICS
71.100.80 - Chemicals for purification of water
Technical Committee
CEN/TC 164 - Water supply
Drafting Committee
CEN/TC 164/WG 9 - Drinking water treatment
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Start Date
23-Jul-2019
Completion Date
14-Apr-2025
Ref Project
SIST EN 15076:2013 - Chemicals used for treatment of swimming pool water - Sodium hydroxide

Relations

Replaces
EN 15076:2006 - Chemicals used for treatment of swimming pool water - Sodium hydroxide
Effective Date
29-May-2013
Revised
prEN 15076 - Chemicals used for treatment of swimming pool water - Sodium hydroxide
Effective Date
19-Jan-2023

Overview

EN 15076:2013 - published by CEN - specifies requirements for sodium hydroxide (caustic soda) used directly or as a raw material for formulations that treat swimming pool water. The standard defines identity, commercial forms, physical/chemical properties, purity criteria, test methods, labelling, transport, storage, safe handling and emergency measures. It is intended to ensure product quality, safety and regulatory compliance in pool water treatment applications.

Key topics and requirements

  • Identification & forms: NaOH (CAS 1310-73-2), available as flakes, pearls, solid or aqueous solutions (typical mass fractions 50% or 30%); solid NaOH minimum 96% mass fraction.
  • Physical/chemical properties: appearance, density (e.g. 1.52 g/ml for 50% at 20 °C), solubility, boiling point, crystallisation point (+12 °C for 50%), high alkalinity and very exothermic dilution.
  • Purity & impurities: specified impurity limits (e.g. NaCl ≤ 2.4%, Na2CO3 ≤ 0.4%, NaClO3 ≤ 0.7% relative to NaOH) and trace metal limits (different Type 1/Type 2 parametric values for As, Cd, Cr, Hg, Ni, Pb, Sb, Se).
  • Test methods: sampling and analysis are to follow EN 896 (the drinking-water sodium hydroxide standard referenced).
  • Labelling & classification: CLP/REACH classification applied - signal word Danger, H314: Causes severe skin burns and eye damage, GHS05 corrosion pictogram (Regulation (EC) No 1272/2008).
  • Transport & marking: UN 1824; class 8 corrosive; packing group II under ADR/RID, IMDG and IATA; required product marking includes product name, net mass, supplier address and statement “this product conforms to EN 15076”.
  • Storage & incompatibilities: avoid aluminium, zinc, galvanised metals (hydrogen evolution); suitable materials include lined mild steel, polyester or polypropylene; CO2 absorption forms sodium carbonate; avoid mixing with concentrated acids and chlorinated organics.
  • Safety & emergency: supplier must provide safety instructions; first aid (rinse skin/eyes, neutralise mouth if conscious, seek medical help); spill response and neutralisation guidance is included.

Applications and users

  • Primary uses: pH/alkalinity adjustment, neutralisation and softening in pool water treatment; applied via metering pumps or dissolving tanks.
  • Who uses this standard: pool operators and facility managers, chemical manufacturers and formulators, suppliers and transporters, testing laboratories, health & safety officers, and regulatory agencies responsible for pool water quality and chemical handling.

Related standards and legislation

  • EN 896 (sodium hydroxide for drinking water) - referenced test methods
  • Regulation (EC) No 1272/2008 (CLP/REACH) - classification & labelling
  • Directive 98/8/EC (biocides) and Council Directive 98/83/EC (drinking water quality) - regulatory context

Keywords: EN 15076:2013, sodium hydroxide, caustic soda, swimming pool water treatment, pool pH adjustment, CLP, UN 1824, EN 896, safety, storage, transport.

Frequently Asked Questions

EN 15076:2013 is a standard published by the European Committee for Standardization (CEN). Its full title is "Chemicals used for treatment of swimming pool water - Sodium hydroxide". This standard covers: This European Standard is applicable to sodium hydroxide solution used directly or for the production of formulations for treating swimming pool water. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium hydroxide. It gives information on its use for treating swimming pool water and determines the rules relating to safe handling and use (see Annex B).

This European Standard is applicable to sodium hydroxide solution used directly or for the production of formulations for treating swimming pool water. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium hydroxide. It gives information on its use for treating swimming pool water and determines the rules relating to safe handling and use (see Annex B).

EN 15076:2013 is classified under the following ICS (International Classification for Standards) categories: 71.100.80 - Chemicals for purification of water. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 15076:2013 has the following relationships with other standards: It is inter standard links to EN 15076:2006, prEN 15076. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase EN 15076:2013 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev hidroksidProdukte zur Aufbereitung von Schwimm- und Badebeckenwasser - NatriumhydroxidProduits chimiques utilisés pour le traitement de l'eau des piscines - Hydroxyde de sodiumChemicals used for treatment of swimming pool water - Sodium hydroxide71.100.80Chemicals for purification of water13.060.25Voda za industrijsko uporaboWater for industrial useICS:Ta slovenski standard je istoveten z:EN 15076:2013SIST EN 15076:2013en,fr,de01-julij-2013SIST EN 15076:2013SLOVENSKI
STANDARDSIST EN 15076:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15076
May 2013 ICS 71.100.80 Supersedes EN 15076:2006English Version
Chemicals used for treatment of swimming pool water - Sodium hydroxide
Produits chimiques utilisés pour le traitement de l'eau des piscines - Hydroxyde de sodium
Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumhydroxid This European Standard was approved by CEN on 21 March 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15076:2013: ESIST EN 15076:2013

General information on sodium hydroxide . 12 A.1 Origin . 12 A.2 Use . 12 Annex B (normative)
General rules relating to safety . 13 B.1 Rules for safe handling and use . 13 B.2 Emergency procedures . 13 Bibliography. 14
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

제목: EN 15076:2013 - 수영장수처리용 화학물질 - 염화나트륨의 사용에 관한 유럽표준 내용: 이 유럽표준은 직접 사용되거나 수영장수처리용 제조에 사용되는 염화나트륨 용액에 적용됩니다. 이 표준은 염화나트륨의 특성을 설명하고 요구사항 및 관련 시험 방법을 지정합니다. 또한 수영장수처리에 염화나트륨을 사용하는 방법에 대한 정보를 제공하며, 안전한 처리와 사용에 관련된 규정을 정합니다 (부록 B 참조).

The article is about the European Standard EN 15076:2013, which pertains to the use of sodium hydroxide for treating swimming pool water. The standard defines the characteristics of sodium hydroxide and outlines the requirements and test methods to ensure its quality. Additionally, it provides information on the use of sodium hydroxide for treating swimming pool water and includes guidelines for safe handling and use. Annex B contains further details on these rules.

記事のタイトル：EN 15076:2013 - スイミングプールの水の処理に使用される化学物質 - 水酸化ナトリウム 記事の内容：このヨーロッパ標準は、直接使用されるか、スイミングプールの水の処理のための製剤の製造に使用される水酸化ナトリウム溶液に適用されます。水酸化ナトリウムの特性を説明し、要件と対応する試験方法を指定します。また、水酸化ナトリウムを使用したスイミングプールの水の処理に関する情報を提供し、安全な取り扱いと使用に関連する規則を定めます（付録Bを参照）。