EN 3155-082:2019
(Main)Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard
This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 082: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 082 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 082. del: Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod
Ta evropski standard določa zahtevane značilnosti, preskuse in orodja za ženske električne kontakte velikosti 082, tipa A, nagubane, razreda S, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002.
Uporabljati ga je treba skupaj s standardom EN 3155-001.
Povezani moški kontakti so določeni v standardih EN 3155-008 in EN 3155-070.
General Information
- Status
- Published
- Publication Date
- 11-Jun-2019
- Withdrawal Date
- 11-Dec-2019
- Technical Committee
- ASD-STAN - Aerospace
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 12-Jun-2019
- Completion Date
- 12-Jun-2019
Relations
- Effective Date
- 02-Nov-2016
Overview
EN 3155-082:2019 is a CEN product standard in the Aerospace series that defines requirements for electrical female contacts, Type A, crimp, class S used in aerospace connector elements. It specifies required characteristics, tests and tooling for these contacts and is intended to be used together with EN 3155-001 (technical specification) and EN 3155-002 (list and utilization of contacts). Associated male contacts are covered by EN 3155-008 and EN 3155-070. This edition supersedes EN 3155-082:2015.
Key topics and technical requirements
- Scope and class: Type A contacts for general application; class S covers an operating temperature range of −65 °C to +200 °C.
- Materials & finish: Contact bodies made from copper alloy with gold plating on an appropriate undercoat; selective protection and specified plating thickness per EN 3155-001 are allowed.
- Dimensions & tolerances: Detailed connector contact dimensions and mass are given (millimetre units) in the standard’s figures and tables; tolerances apply after surface treatment.
- Marking & identification: Colour-band coding per ISO 8843 (e.g., size 22 uses green bands) with guidance on band widths and positioning.
- Permissible cables: Tables specify conductor sizes (with AWG equivalents) and rated test currents for compatible cable types.
- Tooling:
- Crimping tools: Conformant with SAE-AS22520; selector numbers and positioners are specified for correct crimps.
- Insertion/extraction tools: Per SAE-AS81969.
- Testing requirements: Extensive test program referenced to EN 2591 series and EN 3155-001, including:
- Contact resistance (low-level and at rated current)
- Temperature-rise and electrical overload
- Endurance at elevated temperature (e.g., 1 000 h at high temperature groups)
- Rapid change of temperature, shock, vibration, salt mist, fluid resistance
- Mechanical tests (tensile strength of crimp, contact bending, insertion/extraction forces)
- Plating tests (thickness measurement, adhesion, porosity)
- Gauges, designation and marking: Reference to EN 3155-001 for gauges and further designation rules.
Applications
- Design, manufacture and qualification of aerospace connectors and harnesses.
- Production engineering for crimped female contacts used in aircraft and spaceborne electrical systems.
- Acceptance testing and quality control in OEMs, tier suppliers and test laboratories.
- Procurement and specification writing for avionics interconnect components.
Who should use this standard
- Connector and contact manufacturers
- Aerospace OEMs and suppliers (design and quality teams)
- MRO and avionics technicians specifying replacement parts
- Test laboratories and tooling suppliers
Related standards (normative references)
- EN 3155-001, EN 3155-002, EN 3155-008, EN 3155-070
- EN 2591 (test methods)
- EN 2083, EN 4434 (conductors)
- EN 4165-001 (connector modules)
- ISO 8843, SAE-AS22520, SAE-AS81969
Keywords: EN 3155-082:2019, aerospace electrical contacts, female contacts, Type A crimp, class S, crimping tools, connector testing, EN 3155 series.
Frequently Asked Questions
EN 3155-082:2019 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Electrical contacts used in elements of connection - Part 082: Contacts, electrical, female, type A, crimp, class S - Product standard". This standard covers: This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-008 and EN 3155-070.
This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-008 and EN 3155-070.
EN 3155-082:2019 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 3155-082:2019 has the following relationships with other standards: It is inter standard links to EN 3155-082:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 3155-082:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2019
Nadomešča:
SIST EN 3155-082:2016
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 082. del:
Kontakti, električni, ženski, tip A, nagubani, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 082:
Contacts, electrical, female, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 082: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
082 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-082:2019
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 3155-082
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3155-082:2015
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 082: Contacts, electrical, female, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 082 : Contacts Verwendung in Verbindungselementen - Teil 082:
électriques, femelles, type A, à sertir, classe S - Norme Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse
de produit S - Produktnorm
This European Standard was approved by CEN on 2 December 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-082:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation . 14
6 Marking . 14
7 Technical specification . 14
European foreword
This document (EN 3155-082:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards shall
be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-082:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
1 Scope
This European Standard specifies the required characteristics, tests and tooling applicable to female
electrical contacts 082, type A, crimp, class S used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008 and EN 3155-070.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all parts), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection —
Part 001: Technical specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection —
Part 002: List and utilization of contacts
EN 3155-008, Aerospace series — Electrical contacts used in elements of connection —
Part 008: Contacts, electrical, male, type A, crimp, class S — Product standard
EN 3155-070, Aerospace series — Electrical contacts used in elements of connection —
Part 070: Contacts, electrical, male, type A, crimp, class S — Product standard
EN 4165-001, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 001: Technical specification
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables —
Product standard (Normal and tight tolerances)
1)
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
2)
SAE-AS22520, Crimping tools, wire termination, general specification for
2)
SAE-AS81969, Installing and removal tools, connector electrical contact, general specification for
1) Published by: International Organization for Standardization (ISO), http://www.iso.ch/
2) Published by: National (US) Society of Automotive Engineers (SAE), http://www.sae.org/
3 Terms
...
This article is about a European standard, EN 3155-082:2019, which pertains to female electrical contacts used in connection elements. Specifically, it focuses on type A contacts that are crimped and belong to class S. The standard outlines the necessary characteristics, tests, and tooling for these contacts. It is important to note that EN 3155-082 should be used alongside EN 3155-001. The corresponding male contacts are detailed in EN 3155-008 and EN 3155-070.
이 기사는 EN 3155-082:2019라는 유럽 표준에 관한 내용입니다. 이 표준은 연결 요소에 사용되는 여성용 전기 접촉자인 082, A형, 압착 형태의 S급 분류에 대한 필수 특성, 시험 및 공구를 명시합니다. 이 표준은 EN 3155-002와 함께 사용되어야 합니다. 관련된 남성용 접촉자는 EN 3155-008 및 EN 3155-070에 정의되어 있습니다.
この記事は、EN 3155-082:2019というヨーロッパ規格についてです。この規格は、接続要素に使用される雌性電気接触子の082、A型、クリンプ、Sクラスに関する必要な特性、試験、工具を定めています。EN 3155-002と併用する必要があります。関連する雄性接触子は、EN 3155-008およびEN 3155-070で定義されています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...