Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves

This part of this standard specifies face-to-face (FTF) and centre-to-face (CFT) dimensions for Class designated metal valves used in flanged pipe systems.  This part of this standard covers valves having the following Class and DN values:  - Class 125, Class 150, Class 250, Class 300, Class 600. - DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000.

Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Teil 2: Nach Class bezeichnete Armaturen

Dieser Teil der Norm legt Baulängen für nach Class bezeichnete Armaturen aus Metall fest., die in Rohrleitungen mit Flanschen eingesetzt werden.  Dieser Teil der Norm unfasst Armaturen mit folgenden Class- und DN-Werten: - Class 125, Class 150, Class 250, Class 300, Class 600.  - DN 10; DN 15; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000.

Robinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Partie 2: Appareils de robinetterie désignés Class

Cette partie de la présente norme prescrit les dimensions face à face (FAF) et face à axe (FAA) des appareils de robinetterie métalliques désignées Class et utilisés dans les tuyauteries à brides.  Cette partie de la présente norme couvre les appareils de robinetterie dont les valeurs de Class et DN sont les suivantes: - Class 125; Class 150; Class 250; Class 300, Class 600.  - DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000.

Industrijski ventili - Vgradne dolžine kovinskih ventilov za uporabo v cevovodih s prirobnicami - 2. del: S Class označeni ventili

General Information

Status
Withdrawn
Publication Date
17-Oct-1995
Withdrawal Date
29-Jan-2008
ICS
23.060.01 - Valves in general
Technical Committee
CEN/TC 69 - Industrial valves
Drafting Committee
CEN/TC 69/WG 1 - Basic standards
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Jan-2008
Completion Date
30-Jan-2008
Directive
97/23/EC - Pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 558-2:2000 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves

Relations

Replaced By
EN 558:2008 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Effective Date
22-Dec-2008
Parent
EN 558-1:1995 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanges pipe systems - Part 1:PN-designated valves
Effective Date
22-Dec-2008

Get Certified

Connect with accredited certification bodies for this standard

Institut za varilstvo d.o.o. (Welding Institute)

Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au

SA Slovenia Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 558-2:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves". This standard covers: This part of this standard specifies face-to-face (FTF) and centre-to-face (CFT) dimensions for Class designated metal valves used in flanged pipe systems. This part of this standard covers valves having the following Class and DN values: - Class 125, Class 150, Class 250, Class 300, Class 600. - DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000.

This part of this standard specifies face-to-face (FTF) and centre-to-face (CFT) dimensions for Class designated metal valves used in flanged pipe systems. This part of this standard covers valves having the following Class and DN values: - Class 125, Class 150, Class 250, Class 300, Class 600. - DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000.

EN 558-2:1995 is classified under the following ICS (International Classification for Standards) categories: 23.060.01 - Valves in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 558-2:1995 has the following relationships with other standards: It is inter standard links to EN 558:2008; is excused to EN 558-1:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 558-2:1995 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 558-2:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2000
,QGXVWULMVNLYHQWLOL9JUDGQHGROåLQHNRYLQVNLKYHQWLORY]DXSRUDERYFHYRYRGLKV
SULUREQLFDPLGHO6&ODVVR]QDþHQLYHQWLOL
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in
flanged pipe systems - Part 2: Class-designated valves
Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen
mit Flanschen - Teil 2: Nach Class bezeichnete Armaturen
Robinetterie industrielle - Dimensions face-a-face et face-a-axe de la robinetterie
métallique utilisée dans les systemes de canalisations a brides - Partie 2: Appareils de
robinetterie désignés Class
Ta slovenski standard je istoveten z: EN 558-2:1995
ICS:
23.060.01 Ventili na splošno Valves in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...