iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12784:1999

(Main)

Footwear - Test methods for whole shoe - Thermal insulation

Footwear - Test methods for whole shoe - Thermal insulation

This standard describes a method for the measurement of insulation against cold of footwear. It applies to all types of closed footwear or boot.

Schuhe - Prüfverfahren für den ganzen Schuh - Kälteisolierung

Diese Norm legt ein Verfahren für die Messung der Kälteisolierung von Schuhen fest. Er gilt für alle Arten geschlossener Schuhe oder Stiefel.

Chaussures - Méthodes d'essai applicables à la chaussure entière - Isolation thermique

La présente norme européenne décrit une méthode de mesure de la capacité des chaussures à isoler du froid. Il s'applique à tous les types de bottes  ou chaussures fermés.

Footwear - Test methods for whole shoe - Thermal insulation

General Information

Status
Withdrawn
Publication Date
07-Dec-1999
Withdrawal Date
14-Sep-2011
ICS
61.060 - Footwear
Technical Committee
CEN/TC 309 - Footwear
Drafting Committee
CEN/TC 309/WG 1 - Minimum performance requirements and test methods for components for footwear
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Sep-2011
Completion Date
15-Sep-2011
Ref Project
SIST EN 12784:2000 - Footwear - Test methods for whole shoe - Thermal insulation

Relations

Replaced By
EN ISO 20877:2011 - Footwear - Test methods for whole shoe - Thermal insulation (ISO 20877:2011)
Effective Date
22-Dec-2008

Buy Standard

EN 12784:2000EN 12784:2000
PreviousNext
Standard
EN 12784:2000
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Test methods for whole shoe - Thermal insulationSchuhe - Prüfverfahren für den ganzen Schuh - KälteisolierungChaussures - Méthodes d'essai applicables a la chaussure entiere - Isolation thermiqueFootwear - Test methods for whole
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19410-1:2022(Main)
Footwear sizing - Inshoe measurement - Part 1: Shoe length (ISO 19410-1:2022)
SIST EN ISO 19410-1:2023

This document specifies a method for measuring the effective shoe length to accommodate the foot.
This document is not applicable to heel and toe open shoes (example: sandals).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20535:2022(Main)
Footwear - Test method for insoles and insocks - Dimensional change after cycle of wetting and drying (ISO 20535:2019)
SIST EN ISO 20535:2022

This document specifies a method for determining the dimensional change of footwear insoles and insocks after cycle wetting and drying regardless of the material.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19574:2022(Main)
Footwear and footwear components - Qualitative test method to assess antifungal activity (growth test) (ISO 19574:2022)
SIST EN ISO 19574:2022

This document specifies a test method (growth test) for the qualitative evaluation of the antifungal activity of footwear and footwear components exposed to the action of filamentous micro-fungi.
This document is only applicable to footwear and components that claim to have antifungal (antimycotic) or antimicrobial treatment effects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16189:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO 16189:2021)
SIST EN ISO 16189:2022

This document specifies a method to determine the amounts of dimethylformamide (DMF) in footwear and footwear components containing polyurethane (PU) coated material.
NOTE 1   In the footwear industry, when PU is injected (reaction moulded), this process does not require the use of DMF. For PU coated material, the use of DMF is possible.
NOTE 2   Several abbreviations can be used for dimethylformamide DMF, DMFa, DMFo. This document uses DMF.
ISO/TR 16178:2021, Table 1 defines which materials are concerned by this determination.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21061:2021(Main)
Footwear - Chemical tests - General principles on the preparation of samples (ISO 21061:2021)
SIST EN ISO 21061:2022

This document specifies a range of procedures for the sample preparation of footwear and footwear components to carry out chemical tests. It further specifies how to designate the samples.
The sampling procedures specified are designed to allow concurrent chemical testing for footwear
This document is applicable to all types of footwear and footwear components.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16190:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAHs) in footwear materials (ISO 16190:2021)
SIST EN ISO 16190:2022

This document specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAHs) in footwear and footwear components.
NOTE            A list of relevant materials can be found in ISO/TR 16178:2021, Table 1[3].

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 16178:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Lists of critical chemical substances (ISO/TR 16178:2021)
SIST-TP CEN ISO/TR 16178:2021

This document defines lists of critical chemical substances potentially present in footwear and footwear components.
This document describes the critical chemical substances, their potential risks of nocuousness, in which materials they could be found, and which test method(s) can be used to quantify them.
The test methods listed indicate the state of the art. For some substances, a test method is not available.
This document is applicable to any kind of footwear and footwear components.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19957:2021(Main)
Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2021)
SIST EN ISO 19957:2021

This document specifies a test method for measuring the force required to pull a single heel pin out of a heel. This test method is used both to measure the heel pin holding strength of heel materials by using a standard heel pin and a method of insertion, and to assess the heel nailing of commercial production.
This test method is applicable to testing plastics and wooden heels for women’s footwear. Heels composed of layers of fibreboard or leather and low plastics heels for men’s footwear cannot be tested by this method.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16181-2:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Part 2: Determination of phthalate without solvent extraction (ISO 16181-2:2021)
SIST EN ISO 16181-2:2021

This document specifies a method for the determination of the content of specific phthalates (see Annex A) by pyrolyzer/thermal desorption gas chromatography-mass spectrometry (Py/TD-GC-MS). This document is applicable to all types of footwear materials except textiles.
NOTE   See also CEN/TR 16417 for a list of the specific phthalates to which this document applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16186:2021(Main)
Footwear - Critical substances potentially present in footwear and footwear components - Determination of dimethyl fumarat (DMFU) (ISO 16186:2021)
SIST EN ISO 16186:2021

This document specifies a method for the determination of the content of dimethyl fumarate (DMFU) by gas chromatograph with single quadrupole mass spectrometer (GC-MS) or tandem quadrupole mass spectrometer (GC-MS/MS).
This document is applicable to all types of footwear and footwear components except metal parts.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day