iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 534:2006/FprA1

(Amendment)

Corrugated bitumen sheets - Product specification and test methods

Corrugated bitumen sheets - Product specification and test methods

Modifcation of the header and text of clause 5.3.7

Bitumen Wellplatten - Produktfestlegungen und Prüfverfahren

Plaques ondulées bitumées - Spécifications des produits et méthodes d'essai

Valovite bitumenske plošče - Specifikacije in preskusne metode

General Information

Status
Not Published
ICS
91.100.50 - Binders. Sealing materials
Technical Committee
CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
Drafting Committee
CEN/TC 128/SC 6 - Bitumen shingles and corrugated sheets for roofing
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
08-Jan-2010
Due Date
30-Dec-2010
Completion Date
08-Jan-2010
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
Ref Project
SIST EN 534:2006/kFprA1:2009 - Corrugated bitumen sheets - Product specification and test methods

Relations

Merged Into
EN 534:2006+A1:2010 - Corrugated bitumen sheets - Product specification and test methods
Effective Date
19-Jan-2023
Amends
EN 534:2006 - Corrugated bitumen sheets - Product specification and test methods
Effective Date
20-Jun-2009

Buy Standard

EN 534:2006/kFprA1:2009EN 534:2006/kFprA1:2009
PreviousNext
Draft
EN 534:2006/kFprA1:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2009
9DORYLWHELWXPHQVNHSORãþH6SHFLILNDFLMHLQSUHVNXVQHPHWRGH
Corrugated bitumen sheets - Product specification and test methods
Bitumen Wellplatten - Produktfestlegungen und Prüfverfahren
Plaques ondulées bitumées - Spécifications des produits et méthodes d'essai
Ta slovenski standard je istoveten z: EN 534:2006/FprA1
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.060.20 Strehe Roofs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 534:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
October 2009
ICS 91.100.50
English Version
Corrugated bitumen sheets - Product specification and test
methods
Plaques ondulées bitumées - Spécifications des produits et Bitumen Wellplatten - Produktfestlegungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 128.
This draft amendment A1, if approved, will modify the European Standard EN 534:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 544:2011(Main)
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
SIST EN 544:2011

This European Standard specifies the properties, performance and methods of test of the finished bitumen shingles prior to them being laid on the roof.
It also includes rules for marking, labelling and provides a clause for evaluation of conformity.
This European Standard does not include design requirements, installation techniques and roof system performance.
This European Standard applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer’s installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding.
This European Standard applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two.
In case of multilayer shingles each layer need to have the same type of reinforcement and same type of coating (ref. to Clause 8).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 534:2006+A1:2010(Main)
Corrugated bitumen sheets - Product specification and test methods
SIST EN 534:2006+A1:2010

This European Standard specifies the technical properties and establishes the test and inspection methods for finished corrugated bitumen sheets on leaving the factory. It also provides for the evaluation of conformity of products with the requirements of this standard.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 534(Main)
Corrugated bitumen sheets - Product specification and test methods
oSIST prEN 534:2020

This European Standard specifies the technical properties and establishes the test and inspection methods for finished corrugated bitumen sheets on leaving the factory. It also provides for the evaluation of conformity of products with the requirements of this standard.

  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 544 rev(Main)
Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
oSIST prEN 544:2020

This document specifies the properties, performance and methods of test of the finished bitumen shingles prior to them being laid on the roof.
It also includes rules for marking, labelling and provides a clause for assessment and verification of constancy of performance (AVCP).
This document does not include design requirements, installation techniques and roof system performance.
This document applies to bitumen shingles where the watertightness of the system is ensured by overlapping, by different adhesive systems or a combination of these, according to manufacturer’s installation instructions, intended to be laid as covering for pitched roofs and/or wall cladding.
This document applies only to bitumen shingles with a mineral reinforcement, synthetic reinforcement or a mixture of the two.
This document covers shingles with a minimum mass of bitumen of 1 300 g/m2 in case of monolayer shingles and 1 500g/m2 in case of multilayer shingle.
In case of multilayer shingles each layer need to have the same type of reinforcement and same type of coating (ref. to Clause 8).

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12607-1:2024(Main)
Bitumens and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method
kSIST FprEN 12607-1:2024

This document specifies a method for the conditioning of bitumen or bituminous binders in order to provide for measuring the combined effects of heat and air on a thin moving film of bitumen or bituminous binder simulating the hardening which most bituminous binders undergo during mixing in an asphalt mixing plant. The method is referred to as RTFOT - Rolling Thin Film Oven Test.
The method described is applicable to paving grade bitumen. The method described is also applicable to other bituminous binders considering that the reference temperature can result in excessive hardening that does not resemble real conditions during mixing at the plant. It is possible that the method does not represent the hardening that occurs during mixing bitumen used for warm mix asphalt.
The method described is not applicable to those binders having a viscosity at the tested temperature not allowing to provide a moving film. In some cases, it is possible that the test sample creeps out of the glass container and flows on the heating elements of the oven during testing.
The method described is not applicable to binders with volatiles components present. In case of cutback bitumen or bituminous emulsion, the described procedure is only applicable after being stabilized, e.g. in accordance with EN 13074-2 [9].
WARNING - Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to identify the hazards and assess the risks involved in performing this test method and to implement sufficient control measures to protect individual operators (and the environment). This includes appropriate safety and health practices and determination of the applicability of regulatory limitations prior to use.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1426:2024(Main)
Bitumens and bituminous binders - Determination of needle penetration
kSIST FprEN 1426:2024

This document specifies a method for the determination of the needle penetration of bitumens and bituminous binders.
The standard procedure for the determination of the needle penetration (consistency) is described for penetrations up to (330 × 0,1) mm at a temperature of 25 °C. The method also allows for penetrations up to (500 × 0,1) mm using a longer needle.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12597:2024(Main)
Bitumens and bituminous binders - Terminology
SIST EN 12597:2025

This European Standard defines terms for paving or industrial bitumen of various types and binders derived from bitumen.
This European Standard is intended to cover materials only within the scope of CEN/TC 336, i.e. only bitumens and bituminous binders. It should consequently not extend to non-petroleum "hydrocarbon" binders such as coal tar and its derivatives or to natural asphalts. However, some definitions are given for some excluded materials and related terms. The corresponding terms were introduced only when they appeared in a definition of a product or process and when their definition was found necessary for understanding or for avoiding any ambiguity.

  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12594:2024(Main)
Bitumens and bituminous binders - Preparation of test samples
SIST EN 12594:2024

This document specifies methods for preparing test samples of bitumens and bituminous binders in order to test their properties.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13428:2024(Main)
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2024)
SIST EN ISO 13428:2024

This document describes an index test for the determination of the protection efficiency of a geosynthetic on a hard surface, exposed to the impact load of a hemispherical object.
The index test measures the change in thickness of a thin lead plate lying between the geosynthetic and a rigid support.
It is also used as a performance test, by using the real rigid surface to protect and the real sequence of geosynthetics.
The test is applicable to all geosynthetics with apertures smaller than 15 mm (maximum size).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17388-1:2024(Main)
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 1: Cradle to grave and module D
SIST EN 17388-1:2024

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to grave and module D EPD using:
-   either generic data and system generic data;
or
-   specific data and system specific data.
This document includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data;
-   define generic data and system generic data which are to be used for an EPD.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day