Children's furniture - Mattresses for cots and cribs - Safety requirements and test methods

This draft European Standard specifies safety requirements and test methods for mattresses including mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby beds, for domestic and non-domestic use.
This draft European Standard does not apply to mattresses for carry cots and pram bodies, inflatable mattresses, water mattresses and mattresses used for medical purposes.

Kindermöbel - Matratzen für Kinderbetten und Krippen - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Matratzen fest, einschließlich Matratzenböden und Matratzenauflagen, die in Kinderbetten, Reisekinderbetten, Krippen und Hängewiegen im Wohnbereich und Nicht Wohnbereich verwendet werden.
Diese Europäische Norm gilt nicht für Matratzen für Babytragetaschen und Kinderwagenaufsätze, aufblasbare Matratzen, Wassermatratzen und Matratzen für medizinische Zwecke.

Mobilier pour jeunes enfants - Matelas pour berceaux et lits à nacelle - Exigences de sécurité et méthodes d'essai

La présente Norme européenne spécifie des exigences de sécurité et des méthodes d'essai applicables aux matelas ainsi qu'aux matelas-sommiers et aux sur-matelas, utilisés dans les berceaux, les lits à nacelle, les lits parapluie et les lits bébé suspendus à usage domestique et collectif.
La présente Norme européenne ne s'applique pas aux matelas des nacelles et des landaus, aux matelas gonflables, aux matelas à eau et aux matelas à usage médical.

Pohištvo za otroke - Posteljni vložki za posteljice in zibelke - Varnostne zahteve in preskusne metode

Ta evropski standard določa varnostne zahteve in preskusne metode za posteljne vložke, vključno z vložki in prevlekami za vložke, ki se uporabljajo v otroških posteljah, zibelkah ter visečih otroških posteljicah, za domačo in nedomačo uporabo.
Ta standard se ne uporablja za posteljne vložke za prenosne otroške postelje in košare, napihljive posteljne vložke, vodne posteljne vložke ter posteljne vložke, namenjene za medicinsko uporabo.

General Information

Status
Withdrawn
Publication Date
02-May-2017
Withdrawal Date
29-Jun-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
30-Jun-2021

Relations

Buy Standard

Standard
EN 16890:2017
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2017
Pohištvo za otroke - Posteljni vložki za posteljice in zibelke - Varnostne zahteve in
preskusne metode
Children's furniture - Mattresses for cots and cribs - Safety requirements and test
methods
Kindermöbel - Matratzen für Kinderbetten - Sicherheitstechnische Anforderungen und
Prüfverfahren
Mobilier pour jeunes enfants - Matelas pour berceaux et lits bébé - Exigences de sécurité
et méthodes d'essai
Ta slovenski standard je istoveten z: EN 16890:2017
ICS:
97.140 Pohištvo Furniture
97.190 Otroška oprema Equipment for children
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 16890
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 97.140; 97.190
English Version
Children's furniture - Mattresses for cots and cribs - Safety
requirements and test methods
Mobilier pour jeunes enfants - Matelas pour berceaux Kindermöbel - Matratzen für Kinderbetten und
et lits à nacelle - Exigences de sécurité et méthodes Krippen - Sicherheitstechnische Anforderungen und
d'essai Prüfverfahren
This European Standard was approved by CEN on 3 March 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16890:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General test conditions . 5
4.1 Preliminary preparation . 5
4.2 Application of forces . 6
4.3 Tolerances . 6
5 Test equipment . 6
5.1 Measuring table . 6
5.2 Stops . 6
5.3 Square aluminium alloy tube . 6
5.4 Loading pad . 6
5.5 Test template for determination of the indentation depth . 7
5.6 Spherical load for determination of the indentation depth . 8
5.7 Test foam . 8
5.8 Small parts cylinder . 8
5.9 Feeler gauge . 9
5.10 Cone . 9
5.11 Probe. 10
6 Chemical hazards . 10
7 Fire and thermal hazards (see A.3) . 11
8 Mechanical hazards . 11
8.1 Entrapment hazards from gaps and openings (see A.4) . 11
8.1.1 Entrapment hazards between the mattress and the sides . 11
8.1.2 Body entrapment hazards. 11
8.1.3 Entanglement hazards (see A.4.3) . 12
8.2 External suffocation hazards (see A.4.4) . 12
8.2.1 Labels and decals . 12
8.2.2 Plastic packaging . 12
8.2.3 Firmness . 13
8.3 Choking and internal suffocation hazards (see A.4.5) . 15
8.3.1 Small parts . 15
8.3.2 Accessibility to filling materials . 16
8.4 Hazards due to edges and protrusions (see A.4.6) . 18
8.5 Structural integrity (see A.4.7) . 18
8.5.1 Shrinkage . 18
8.5.2 Hazards due to deformation of the filling . 18
9 Product information (see A.4.8) . 19
9.1 Marking . 19
9.2 Purchase information . 19
9.3 Instruction for use . 20
Annex A (informative) Rationales . 21
A.1 General . 21
A.2 Chemical hazards (Clause 6) . 21
A.3 Thermal hazards (Clause 7) . 21
A.4 Mechanical hazards (Clause 8) . 22
A.4.1 General . 22
A.4.2 Entrapment hazards (8.1) . 22
A.4.3 Entanglement hazards (8.1.3) . 22
A.4.4 Suffocation hazards (8.2) . 22
A.4.5 Choking and ingestion hazards (8.3) . 22
A.4.6 Hazardous edges and protrusions (8.4) . 23
A.4.7 Structural integrity (8.5) . 23
A.4.8 Product information (Clause 9) . 23
Annex B (informative) Colorants . 24
B.1 Rationale . 24
B.2 Colorants . 24
B.3 Colour fastness to perspiration . 24
Annex C (informative) A–deviations . 25
Bibliography . 27

European foreword
This document (EN 16890:2017) has been prepared by Technical Committee CEN/TC 207 “Furniture”,
the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2017, and conflicting national standards
shall be withdrawn at the latest by November 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This European Standard specifies safety requirements and test methods for mattresses including
mattress bases and mattress toppers, used in children's cots, travel cots, cribs and suspended baby
beds, for domestic and non-domestic use.
This European Standard does not apply to mattresses for carry cots and pram bodies, inflatable
mattresses, water mattresses and mattresses used for medical purposes.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 71-1, Safety of toys - Part 1: Mechanical and physical properties
EN 71-2:2011+A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.