EN ISO 6926:2016/A1:2020

SLOVENSKI STANDARD
01-januar-2021
Akustika - Zahteve za lastnosti in umerjanje referenčnih virov zvoka pri
ugotavljanju ravni zvočnih moči - Dopolnilo A1 (ISO 6926:2016/Amd 1:2020)
Acoustics - Requirements for the performance and calibration of reference sound
sources used for the determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Akustik - Anforderungen an die Eigenschaften und die Kalibrierung von
Vergleichsschallquellen für die Bestimmung von Schallleistungspegeln - Änderung 1
(ISO 6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances et à l'étalonnage des sources
sonores de référence pour la détermination des niveaux de puissance acoustique -
Amendement 1 (ISO 6926:2016/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6926:2016/A1:2020
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 6926:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 17.140.01
English Version
Acoustics - Requirements for the performance and
calibration of reference sound sources used for the
determination of sound power levels - Amendment 1 (ISO
6926:2016/Amd 1:2020)
Acoustique - Prescriptions relatives aux performances Akustik - Anforderungen an die Eigenschaften und die
et à l'étalonnage des sources sonores de référence pour Kalibrierung von Vergleichsschallquellen für die
la détermination des niveaux de puissance acoustique - Bestimmung von Schallleistungspegeln - Änderung 1
Amendement 1 (ISO 6926:2016/Amd 1:2020) (ISO 6926:2016/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 6926:2016; it was approved by CEN on 28 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6926:2016/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 6926:2016/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 6926:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2021, and
conflicting national standards shall be withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 6926:2016/Amd 1:2020 has been approved by CEN as EN ISO 6926:2016/A1:2020
without any modification.
SIST EN ISO 6926:2016/A
...