Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Will be submitted to a parallel enquiry under VA/5.1 on document ISO/DIS ++ 10360-3 (2nd DIS vote (5 month vote) for ISO and 1st enquiry for CEN) ++ (futher to phone call from Safoura - NT/1998-05-04).

Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)

Dieser Teil von ISO 10360 legt die Annahmeprüfung zur Bestätigung der vom Hersteller genannten Leistung eines Vier-Achsen-Koordinatenmessgerätes (KMG) fest. Sie legt auch die Bestätigungsprüfung fest, die es dem Anwender ermöglicht, die Vier-Achsen-Leistung des KMG regelmäßig zu bestätigen. Die in diesem Teil von ISO 10360 beschriebene Annahmeprüfung und Bestätigungsprüfung sind nur anwendbar für Vier-Achsen-Geräte mit drei Achsen für die Messung der Werkstückkoordinaten und einem Drehtisch für die Anordnung des Werkstückes.

Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrième axe (ISO 10360-3:2000)

La présente partie de l'ISO 10360 spécifie l'essai de réception qui vérifie que les performances des machines à mesurer tridimensionnelles (MMT) à quatre axes sont conformes à ce qui est spécifié par le fabricant. Elle spécifie aussi l'essai de vérification périodique qui permet à l'utilisateur de vérifier périodiquement les performances d'une MMT à quatre axes.L'essai de réception et l'essai de vérification périodique décrits dans la présente partie de l'ISO 10360 s'appliquent uniquement aux machines à quatre axes, ayant trois axes pour mesurer les coordonnées de la pièce et un plateau tournant pour l'orientation de la pièce.

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

General Information

Status
Published
Publication Date
14-Mar-2000
ICS
17.040.30 - Measuring instruments
Technical Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Drafting Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
10-Jul-2008
Completion Date
10-Jul-2008
Ref Project
SIST EN ISO 10360-3:2000 - Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)

Overview

EN ISO 10360-3:2000 is part of the ISO 10360 series of Geometrical Product Specification (GPS) standards that define acceptance and reverification tests for coordinate measuring machines (CMM). Part 3 specifically applies to four‑axis CMMs that use a rotary table as the fourth axis. The standard specifies test principles and procedures to verify that a machine’s performance for rotary‑table measurement is within the declared maximum permissible errors (MPEs).

Key topics and requirements

  • Scope and purpose
    • Acceptance tests (manufacturer) and reverification tests (user) for four‑axis CMMs with a rotary table.
    • Tests supplement the size‑measuring tests of ISO 10360‑2 and are aimed at errors introduced by rotary table motion.
  • Metrological characteristics
    • Defines the error of indication components for four‑axis systems: radial (FR), tangential (FT) and axial (FA).
    • MPE values for FR, FT, FA are expressed in micrometres and are stated by the manufacturer (acceptance) or chosen by the user (reverification).
  • Environmental and operating conditions
    • Limits for temperature, humidity and vibration must be respected as specified by manufacturer/user.
    • Procedures require adherence to machine warm‑up, stylus configuration, cleaning, probing qualification and rotary‑table set‑up.
  • Test equipment and procedure
    • Two calibrated test spheres (10–30 mm diameter; form calibrated) are mounted on the rotary table at defined radius (r) and height (h).
    • Series of measurements are taken with the table rotated through multiple angular positions (recommended to cover at least 720°) to determine centre coordinates.
    • FR, FT and FA are calculated as the peak‑to‑peak variation of the sphere centre coordinates in the radial, tangential and axial directions.

Applications and users

  • Practical uses:
    • Acceptance testing of new four‑axis CMMs prior to installation.
    • Periodic reverification for quality assurance and traceability in production metrology.
    • Comparative evaluation when matching CMM capability to large workpiece tolerances or when extending measuring volume via a rotary table.
  • Typical users:
    • CMM manufacturers and commissioning teams
    • Metrology laboratories and quality engineers
    • Aerospace, automotive and precision manufacturing sectors that use four‑axis measurement

Related standards

  • ISO 10360-1 (vocabulary)
  • ISO 10360-2 (CMMs for linear dimension tests)
  • ISO 10360 (series) - other parts for scanning, multi‑stylus probings, etc.
  • ISO 14253-1 and the VIM (metrology vocabulary) referenced for decision rules and terms

Keywords: EN ISO 10360-3:2000, GPS standard, coordinate measuring machines, CMM acceptance test, four‑axis CMM, rotary table, MPE, error of indication, test spheres, CMM reverification.

Frequently Asked Questions

EN ISO 10360-3:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)". This standard covers: Migrated from Progress Sheet (TC Comment) (2000-07-10): Will be submitted to a parallel enquiry under VA/5.1 on document ISO/DIS ++ 10360-3 (2nd DIS vote (5 month vote) for ISO and 1st enquiry for CEN) ++ (futher to phone call from Safoura - NT/1998-05-04).

Migrated from Progress Sheet (TC Comment) (2000-07-10): Will be submitted to a parallel enquiry under VA/5.1 on document ISO/DIS ++ 10360-3 (2nd DIS vote (5 month vote) for ISO and 1st enquiry for CEN) ++ (futher to phone call from Safoura - NT/1998-05-04).

EN ISO 10360-3:2000 is classified under the following ICS (International Classification for Standards) categories: 17.040.30 - Measuring instruments. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 10360-3:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)Geometrische Produktspezifikation (GPS) - Annahmeprüfung und Bestätigungsprüfung für Koordinatenmessgeräte (KMG) - Teil 3: KMG mit der Achse eines Drehtisches als vierte Achse (ISO 10360-3:2000)Spécification géométrique des produits (GPS) - Essais de réception et de vérification périodique des machines a mesurer tridimensionnelles (MMT) - Partie 3: MMT ayant l'axe de rotation d'un plateau tournant comme quatrieme axe (ISO 10360-3:2000)Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000)17.040.40Geometrical Product Specification (GPS)17.040.30MerilaMeasuring instrumentsICS:Ta slovenski standard je istoveten z:EN ISO 10360-3:2000SIST EN ISO 10360-3:2000en01-december-2000SIST EN ISO 10360-3:2000SLOVENSKI
STANDARD
ReferencenumberISO10360-3:2000(E)©ISO2000INTERNATIONALSTANDARDISO10360-3Firstedition2000-03-15GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxisSpécificationgéométriquedesproduits(GPS)—Essaisderéceptionetdevérificationpériodiquedesmachinesàmesurertridimensionnelles(MTT)—Partie3:MMTayantl'axederotationd'unplateautournantcommequatrièmeaxeSIST EN ISO 10360-3:2000

ISO10360-3:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227341079E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO2000–AllrightsreservedSIST EN ISO 10360-3:2000

ISO10360-3:2000(E)©ISO2000–AllrightsreservediiiContentsPageForeword.ivIntroduction.v1Scope.12Normativereferences.13Termsanddefinitions.14Requirementsformetrologicalcharacteristics.24.1Errorofindication.24.2Environmentalconditions.24.3Rotarytable.24.4Stylussystem.24.5Operatingconditions.25Acceptancetestandreverificationtest.35.1Principles.35.2Measuringequipment.35.3Procedure.35.4Obtentionoftestresults.56Compliancewithspecifications.86.1Acceptancetest.86.2Reverificationtest.87Applications.87.1Acceptancetest.87.2Reverificationtest.87.3Interimcheck.8AnnexA(informative)Interimcheck.9AnnexB(informative)RelationtotheGPSmatrixmodel.10Bibliography.12SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)iv©ISO2000–AllrightsreservedForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO10360maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO10360-3waspreparedbyTechnicalCommitteeISO/TC213,Dimensionalandgeometricalproductspecificationsandverification.ISO10360consistsofthefollowingparts,underthegeneraltitleGeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM):Part1:VocabularyPart2:CMMsusedformeasuringlineardimensionsPart3:CMMswiththeaxisofarotarytableasthefourthaxisPart4:CMMsusedinscanningmeasuringmodePart5:CMMsusingmultiplestylusprobingsystemsPart6:EstimationoferrorsincomputingGaussianassociatedfeaturesAnnexesAandBofthispartofISO10360areforinformationonly.SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)©ISO2000–AllrightsreservedvIntroductionThispartofISO10360isageometricalproductspecification(GPS)standardandistoberegardedasageneralGPSstandard(seeISO/TR14638).Itinfluenceslink5ofthechainsofstandardsonsize,distance,radius,angle,form,orientation,location,run-outanddatums.FormoredetailedinformationontherelationshipofthispartofISO13060tootherstandardsandtheGPSmatrixmodel,seeannexB.TheacceptancetestandreverificationtestofthispartofISO10360areapplicabletoCMMswhichusearotarytablefortheorientationofaworkpiecebeingmeasured.ThetestsspecifiedinthispartofISO10360areperformedinadditiontothesizemeasuringtestsaccordingtoISO10360-2,whichareconductedwiththerotarytablestationary.Theyaredesignedtodetectthesystemmeasuringerrorsrelativetoanaxissystemfixedtotherotarytable.Itisnormallynotusefultoisolatetherotarytableerrorsfromothersourcesofmachineerror.SIST EN ISO 10360-3:2000

INTERNATIONALSTANDARDISO10360-3:2000(E)©ISO2000–Allrightsreserved1GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part3:CMMswiththeaxisofarotarytableasthefourthaxis1ScopeThispartofISO10360specifiestheacceptancetestwhichverifiesthattheperformanceoffour-axiscoordinatemeasuringmachines(CMM)isinaccordancewiththatstatedbythemanufacturer.Italsospecifiesthereverificationtest,whichenablestheusertoreverifytheperformanceofafour-axisCMMperiodically.TheacceptancetestandreverificationtestdescribedinthispartofISO10360areapplicableonlytofour-axismachineswiththreeaxesformeasuringworkpiececoordinates,plusarotarytablefororientingtheworkpiece.2NormativereferencesThefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthispartofISO10360.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdonotapply.However,partiestoagreementsbasedonthispartofISO10360areencouragedtoinvestigatethepossibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundatedreferences,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOandIECmaintainregistersofcurrentlyvalidInternationalStandards.ISO10360-1:—1),GeometricalProductSpecifications(GPS)—Acceptanceandreverificationtestsforcoordinatemeasuringmachines(CMM)—Part1:Vocabulary.ISO14253-1:1998,GeometricalProductSpecifications(GPS)—Inspectionbymeasurementofworkpiecesandmeasuringequipment—Part1:Decisionrulesforprovingconformanceornon-conformancewithspecifications.InternationalVocabularyofBasicandGeneralTermsinMetrology(VIM).BIPM,IEC,IFCC,ISO,IUPAC,IUPAP,OIML,2ndedition,1993.3TermsanddefinitionsForthepurposesofthispartofISO10360,thetermsanddefinitionsgiveninISO10360-1,ISO14253-1andVIMapply.1)Tobepublished.SIST EN ISO 10360-3:2000

ISO10360-3:2000(E)2©ISO2000–Allrightsreserved4Requirementsformetrologicalcharacteristics4.1ErrorofindicationTheerrorsofindication,FR,FT,FA,asdefinedinISO10360-1,forthethreefour-axiserrorsshallnotexceedthemaximumpermissibleerrors,MPEFR,MPEFT,MPEFA,asdefinedinISO10360-1,asstatedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Theerrorsofindication(FR,FT,FA)andthemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)areexpressedinmicrometres.4.2EnvironmentalconditionsLimitstoberespectedforpermissibleenvironmentalconditionssuchastemperatureconditions,airhumidityandvibrationatthesiteofinstallationthatinfluencethemeasurementsshallbespecifiedby:themanufacturer,incaseofacceptancetests;theuser,incaseofreverificationtests.Inbothcases,theuserisfreetochoosetheconditionswithinthespecifiedlimits.4.3RotarytableThemaximumpermissibleerrors(MPEFR,MPEFT,MPEFA)applyforanypermittedloading,locationandorientationoftherotarytableontheCMMandforanylocationsofthetestspheresontherotar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...