EN 4245:2020

SLOVENSKI STANDARD
01-maj-2020
Aeronavtika - Toplotno odporna zlitina FE-PM1708 - Obločno pretaljeno v vakuumu
- Toplotno neobdelana (nekovana) - Kovni material - De ≤ 300 mm
Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged -
Forging stock - De ≤ 300 mm
Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PM1708 -
Lichtbogenvakuumerschmolzen - Schmiedezustand - Schmiedevormaterial - De ≤ 300
mm
Série aérospatiale - Alliage résistant à chaud FE-PM1708 - Refondu sous vide par arc -
Non traité - Produits destinés à la forge - De ≤ 300 mm
Ta slovenski standard je istoveten z: EN 4245:2020
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4245
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 49.025.99
English Version
Aerospace series - Heat resisting alloy FE-PM1708 -
Vacuum arc remelted - As forged - Forging stock - De ≤ 300
mm
Série aérospatiale - Alliage résistant à chaud FE- Luft- und Raumfahrt - Hochwarmfeste Legierung FE-
PM1708 - Refondu sous vide par arc - Brut de forge - PM1708 - Lichtbogenvakuumerschmolzen -
Produits destinés à la forge - De ≤ 300 mm Schmiedezustand - Schmiedevormaterial - De ≤ 300
mm
This European Standard was approved by CEN on 18 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4245:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

European foreword
This document (EN 4245:2020) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall be
withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
p
...