prEN 13075-2

SLOVENSKI STANDARD
01-marec-2026
Bitumen in bitumenska veziva - Določanje stopnje stabilnosti - 2. del: Določanje
časa mešanja finih delcev v kationskih bitumenskih emulzijah
Bitumens and bituminous binders - Determination of breaking behaviour - Part 2:
Determination of fines mixing time of cationic bituminous emulsions
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechverhaltens - Teil 2:
Bestimmung der Mischzeit von Feinanteilen in kationischen Bitumenemulsionen
Bitumes et liants bitumineux - Détermination du comportement à la rupture - Partie 2 :
Détermination de la durée de miscibilité des fines dans les émulsions bitumineuses
cationiques
Ta slovenski standard je istoveten z: prEN 13075-2
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2026
ICS 75.140; 91.100.50 Will supersede EN 13075-2:2016
English Version
Bitumens and bituminous binders - Determination of
breaking behaviour - Part 2: Determination of fines mixing
time of cationic bituminous emulsions
Bitumes et liants bitumineux - Détermination du Bitumen und bitumenhaltige Bindemittel -
comportement à la rupture - Partie 2 : Détermination Bestimmung des Brechverhaltens - Teil 2: Bestimmung
de la durée de miscibilité des fines dans les émulsions der Mischzeit von Feinanteilen in kationischen
bitumineuses cationiques Bitumenemulsionen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13075-2:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Reagents and materials . 5
6 Apparatus . 5
7 Sampling . 6
8 Procedure. 6
9 Expression of results . 6
10 Precision . 6
11 Test report . 7
Annex A (normative) Characteristics of the reference fillers . 8
Bibliography . 12

European foreword
This document (prEN 13075-2:2025) has been prepared by Technical Committee CEN/TC 336 “Bitumens
and bituminous binders”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13075-2:2016.
a) Clause 5, “Reagents and materials”: in paragraph 5.1 the naming “Caolin” for the Q92 filler, which
could lead to confusion with the mineralogical nature of kaolin, has been removed;
b) Clause 6, “Apparatus”, has been updated and revised, standardizing the use of the metrological
concept of “maximal permissible measurement error” for describing the measurement precision;
c) Annex A, “Characteristics of the reference fillers”, has been revised: the Sikaisol filler, which
production has been disrupted, has been downgraded to the third place in the reference fillers list;
d) in paragraph A2 the particle size distribution envelope of the Q92 filler has been updated and
tightened, thanks to the to process improvements brought by the producer.
A list of all parts in the EN 13075 series, published under the general title Bitumens and bituminous
binders — Determination of breaking behaviour, can be found on the CEN website.
1 Scope
This document specifies a method for the determination of the fines mixing time of diluted cationic
bituminous emulsions, under standardized conditions.
WARNING — Use of this document can involve hazardous materials, operations and equipment. This
document does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this document to identify the hazards and assess the risks involved in
performing this test method and to implement sufficient control measures to protect individual operators
(and the environment). This includes appropriate safety and health practices and determination of the
applicability of regulatory limitations prior to use.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 58, Bitumen and bituminous binders — Sampling bituminous binders
EN 12594, Bitumens and bituminous binders — Preparation of test samples
EN 12597, Bitumens and bituminous binders — Terminology
EN ISO 3696:1995, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 12597 and the following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
fines mixing time
time in seconds for the mixability of a mixture of mineral filler and bitumen emulsion without noticeable
breaking effect under the conditions specified in this document
4 Principle
A specified quantity of filler is added at a uniform rate,
...