EN 993-14:1998
(Main)Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method
Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method
This part of EN 993 specifies a hot-wire (cross-array) method for the determination of thermal conductivity of refractory products and materials. It is applicable to dense and insulating shaped products and to powdered or granular materials (see 7.3), for thermal conductivities of less than 1,5 W/m.K.Electrically conducting materials cannot be measured. Note 1: The thermal conductivity of bonded bricks may be affected by the appreciable amount of water that is retained after hardening or setting and is released on firing.
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse -Teil 14: Bestimmung der Wärmeleitfähigkeit nach dem Heißdraht-(Kreuz-) Verfahren
Dieser Teil von EN993 legt ein Heißdraht-Verfahren (Kreuzdraht-Verfahren) zur Bestimmung der Wärmeleitfähigkeit von feuerfesten Erzeugnissen und Werkstoffen fest. Diese Norm gilt für dichte und zur Isolation dienende geformte Erzeugnis se sowie für pulverförmiges oder körniges Probengut (siehe 7.3) mit einer Wärmeleitfähigkeit von kleiner als 1,5W/mK. Elektrisch leitende Werkstoffe könne n nicht gemessen werden.
Méthodes d'essai pour produits réfractaires façonnés denses - Partie 14: Détermination de la conductivité thermique par la méthode du fil chaud (croisillon)
La présente partie de la norme européenne EN 993 spécifie une méthode de détermination de la conductivité thermique des produits et matériaux réfractaires par la méthode du fil chaud (croisillon). Elle s'applique aux produits façonnés denses et isolants, et aux matériaux pulvérulents ou granulaires (7.3) pour des conductivités thermiques inférieures à 1,5 W/mK. Il n'est pas possible de soumettre à cette mesure les produits électriquement conducteurs.
Metode za preskušanje gostih oblikovanih ognjevzdržnih izdelkov - 14. del: Ugotavljanje toplotne prevodnosti z metodo vroče žice (navzkrižnih žic)
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-1998
- Withdrawal Date
- 14-May-2010
- Technical Committee
- CEN/TC 187 - Refractory products and materials
- Drafting Committee
- CEN/TC 187/WG 1 - Dense shaped refractory products
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-May-2010
- Completion Date
- 15-May-2010
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 993-14:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method". This standard covers: This part of EN 993 specifies a hot-wire (cross-array) method for the determination of thermal conductivity of refractory products and materials. It is applicable to dense and insulating shaped products and to powdered or granular materials (see 7.3), for thermal conductivities of less than 1,5 W/m.K.Electrically conducting materials cannot be measured. Note 1: The thermal conductivity of bonded bricks may be affected by the appreciable amount of water that is retained after hardening or setting and is released on firing.
This part of EN 993 specifies a hot-wire (cross-array) method for the determination of thermal conductivity of refractory products and materials. It is applicable to dense and insulating shaped products and to powdered or granular materials (see 7.3), for thermal conductivities of less than 1,5 W/m.K.Electrically conducting materials cannot be measured. Note 1: The thermal conductivity of bonded bricks may be affected by the appreciable amount of water that is retained after hardening or setting and is released on firing.
EN 993-14:1998 is classified under the following ICS (International Classification for Standards) categories: 81.080 - Refractories. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 993-14:1998 has the following relationships with other standards: It is inter standard links to EN ISO 8894-1:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 993-14:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-1998
0HWRGH]DSUHVNXãDQMHJRVWLKREOLNRYDQLKRJQMHY]GUåQLKL]GHONRYGHO
8JRWDYOMDQMHWRSORWQHSUHYRGQRVWL]PHWRGRYURþHåLFH QDY]NULåQLKåLF
Methods of testing dense shaped refractory products - Part 14: Determination of thermal
conductivity by the hot-wire (cross-array) method
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse -Teil 14: Bestimmung der
Wärmeleitfähigkeit nach dem Heißdraht-(Kreuz-) Verfahren
Méthodes d'essai pour produits réfractaires façonnés denses - Partie 14: Détermination
de la conductivité thermique par la méthode du fil chaud (croisillon)
Ta slovenski standard je istoveten z: EN 993-14:1998
ICS:
81.080 Ognjevzdržni materiali Refractories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 993-14:1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...