EN ISO 14689:2018
(Main)Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017)
Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017)
ISO 14689:2017 specifies the rules for the identification and description of rock material and mass on the basis of mineralogical composition, genetic aspects, structure, grain size, discontinuities and other parameters. It also provides rules for the description of other characteristics as well as for their designation.
ISO 14689:2017 applies to the description of rock for geotechnics and engineering geology in civil engineering. The description is carried out on cores and other samples of rock and on exposures of rock masses.
Rock mass classification systems using one or more descriptive parameters to suggest likely rock mass behaviour are beyond the scope of this document (see Bibliography).
NOTE Identification and classification of soil for engineering purposes are covered in ISO 14688‑1 and ISO 14688‑2. Identification and description of materials intermediate between soil and rock are carried out using the procedures in ISO 14688‑1, ISO 14688‑2 and this document, as appropriate.
Geotechnische Erkundung und Untersuchung - Benennung, Beschreibung und Klassifizierung von Fels (ISO 14689:2017)
Dieses Dokument legt die Grundprinzipien für die Benennung und Beschreibung von Gestein und Gebirge auf der Grundlage der mineralogischen Zusammensetzung, genetischer Aspekte, der geologischen Struktur, der Korngröße, der Trennflächen und anderer Kenngrößen, fest. Es enthält auch Regeln für die Beschreibung anderer Eigenschaften sowie deren Bezeichnung.
Dieses Dokument gilt für die Beschreibung von Fels in der Geotechnik und der Baugeologie im Bauingenieurwesen. Die Beschreibung erfolgt an Bohrkernen und anderen Gesteinsproben sowie an Gebirgsaufschlüssen.
Gebirgsklassifizierungssysteme, die eine oder mehrere beschreibende Kenngrößen verwenden, um das voraussichtliche Gebirgsverhalten anzuzeigen, liegen nicht im Anwendungsbereich dieses Dokuments (siehe Literaturhinweise).
ANMERKUNG Die Benennung, Beschreibung und Klassifizierung von Boden für bautechnische Zwecke wird in ISO 14688-1 und ISO 14688-2 behandelt. Die Benennung und Beschreibung von Materialien zwischen Boden und Fels wird mithilfe der jeweils anwendbaren Verfahren nach ISO 14688-1, ISO 14688-2 sowie nach diesem Dokument durchgeführt.
Reconnaissance et essais géotechniques - Identification, description et classification des roches (ISO 14689:2017)
Ce document spécifie les règles pour l'identification et la description du matériau et du massif rocheux sur la base de la composition minéralogique, des aspects génétiques, de la structure, de la taille des grains, des discontinuités et d'autres paramètres. Il fournit également des règles pour la description d'autres caractéristiques aussi bien que pour leur désignation.
Ce document s'applique à la description des roches pour la géotechnique et la géologie appliquée dans le génie civil. La description est effectuée sur des carottes et d'autres échantillons de roche et sur des affleurements rocheux.
Les systèmes de classification des massifs rocheux utilisant un ou plusieurs paramètres descriptifs permettant d'apprécier le comportement du massif rocheux sont hors du domaine d'application de ce document (voir Bibliographie).
NOTE L'identification et la classification des sols pour les projets d'ingénierie sont couvertes par l'ISO 14688‑1 et ISO 14688‑2. L'identification et la description des matériaux intermédiaires entre le sol et les roches sont effectuées suivant les procédures les plus adaptées parmi celles de ce présent document, de l'ISO 14688‑2 et de l'ISO 14689‑1.
Geotehnično preiskovanje in preskušanje - Prepoznavanje, opisovanje in razvrščanje kamnin (ISO 14689:2017)
Ta dokument določa pravila za prepoznavanje ter opisovanje kamninskega materiala in mase na podlagi mineraloške sestave, genetskih vidikov, strukture, velikosti zrn, nehomogenosti in drugih parametrov. Poleg tega podaja tudi pravila za opisovanje in označevanje drugih značilnosti.
Ta dokument se uporablja za opisovanje kamnin za geotehnično in inženirsko geologijo na področju gradbeništva. Opisovanje se izvaja na jedrih in drugih vzorcih kamnin ter izpostavljenih kamninskih masah.
Sistemi razvrščanja kamninskih mas z uporabo enega ali več opisnih parametrov, ki kažejo na verjetno delovanje kamninske mase, ne spadajo na področje uporabe tega dokumenta (glej bibliografijo).
OPOMBA: Prepoznavanje in razvrščanje zemljin, namenjenih za uporabo v gradbeništvu, sta zajeta v standardih ISO 14688-1 in
ISO 14688-2. Prepoznavanje in opisovanje vmesnih materialov med zemljinami in kamninami sta izvedena z ustreznimi postopki v standardih ISO 14688-1 in ISO 14688-2 ter temu dokumentu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2018
1DGRPHãþD
SIST EN ISO 14689-1:2004
*HRWHKQLþQRSUHLVNRYDQMHLQSUHVNXãDQMH3UHSR]QDYDQMHRSLVRYDQMHLQ
UD]YUãþDQMHNDPQLQ ,62
Geotechnical investigation and testing - Identification, description and classification of
rock (ISO 14689:2017)
Geotechnische Erkundung und Untersuchung - Benennung, Beschreibung und
Klassifizierung von Fels - Teil 1: Benennung und Beschreibung (ISO 14689:2017)
Reconnaissance et essais géotechniques - Identification, description et classification des
roches (ISO 14689:2017)
Ta slovenski standard je istoveten z: EN ISO 14689:2018
ICS:
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 14689
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 93.020 Supersedes EN ISO 14689-1:2003
English Version
Geotechnical investigation and testing - Identification,
description and classification of rock (ISO 14689:2017)
Reconnaissance et essais géotechniques - Geotechnische Erkundung und Untersuchung -
Identification, description et classification des roches Benennung, Beschreibung und Klassifizierung von Fels
(ISO 14689:2017) - Teil 1: Benennung und Beschreibung (ISO
14689:2017)
This European Standard was approved by CEN on 20 November 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14689:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 14689:2018) has been prepared by Technical Committee ISO/TC 182
“Geotechnics” in collaboration with Technical Committee CEN/TC 341 “Geotechnical Investigation and
Testing” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14689-1:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14689:2017 has been approved by CEN as EN ISO 14689:2018 without any modification.
INTERNATIONAL ISO
STANDARD 14689
First edition
2017-12
Geotechnical investigation and
testing — Identification, description
and classification of rock
Reconnaissance et essais géotechniques — Identification, description
et classification des roches
Reference number
ISO 14689:2017(E)
©
ISO 2017
ISO 14689:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 14689:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Identification and description of rocks . 3
4.1 General . 3
4.2 Rock identification . 3
4.3 Geological formation and age . 4
5 Rock material description . 4
5.1 Colour . 4
5.2 Grain size . 5
5.3 Unconfined compressive strength. 5
5.4 Weathering and alteration effects . 6
5.5 Carbonate content . 7
5.6 Degradation of rock material . 7
6 Rock mass description. 7
6.1 General . 7
6.2 Rock types . 8
6.3 Structure and bedding . 8
6.4 Discontinuities . 8
6.4.1 General. 8
6.4.2 Measurement of discontinuity orientation . 9
6.4.3 Discontinuity spacing .10
6.4.4 Rock block shapes in three dimensions .10
6.4.5 Persistence of discontinuities .11
6.4.6 Roughness .11
6.4.7 Aperture .12
6.4.8 Infilling .13
6.4.9 Seepage .13
6.4.10 Joint sets .13
6.5 Weathering of the rock mass .13
7 Fracture indices in cores .14
8 Rock mass classification .15
9 Reporting .16
Annex A (informative) Aid to identification of rocks on the basis of geological features
for engineering purposes .17
Annex B (informative) Classification of weathering of rocks (material and mass) .18
Annex C (informative) Description of discontinuities in three dimensions .20
Bibliography .21
ISO 14689:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.