EN 15930:2010
(Main)Fibres - Elasticity of fibres - Test methods
Fibres - Elasticity of fibres - Test methods
This test method covers the determination of the elasticity of fibres and may lead to classification of the fibre as elastic fibre (see Annex A).
It is applicable to single man-made crimped and uncrimped fibres.
Fasern - Elastizität von Fasern - Prüfung
Dieses Prüfverfahren umfasst die Bestimmung der Elastizität von Fasern und erlaubt eine Einstufung von Fasern als elastische Fasern (siehe Anhang A). Es ist anwendbar auf gekräuselte und ungekräuselte Chemiefasern.
Fibres - Elasticité des fibres - Méthodes d'essais
La présente méthode d’essai couvre la détermination de l’élasticité des fibres et peut aboutir à la classification
de la fibre comme fibre élastique (voir l’Annexe A).
Elle est applicable aux fibres chimiques frisées et non frisées, prises individuellement.
Vlakna - Elastičnost vlaken - Preskusne metode
Ta preskusna metoda zajema določevanje elastičnosti vlaken in lahko vodi k razvrstitvi vlakna kot elastično vlakno (glej Dodatek A). Uporablja se za enojna sintetična kodrana in nekodrana vlakna.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faser - Elastizität von Fasern - PrüfungFibres - Élasticité des fibres - Méthodes d'essaiFibres - Elasticity of fibres - Test methods59.060.01Tekstilna vlakna na splošnoTextile fibres in generalICS:Ta slovenski standard je istoveten z:EN 15930:2010SIST EN 15930:2010en,fr,de01-december-2010SIST EN 15930:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15930
September 2010 ICS 59.060.01 English Version
Fibres - Elasticity of fibres - Test methods
Fibres - Elasticité des fibres - Méthodes d'essais
Fasern - Elastizität von Fasern - Prüfung This European Standard was approved by CEN on 7 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15930:2010: ESIST EN 15930:2010
"Elastic" qualification of fibres . 14Bibliography . 15 SIST EN 15930:2010
1 Scope This test method covers the determination of the elasticity of fibres and may lead to classification of the fibre as elastic fibre (see Annex A).
It is applicable to single man-made crimped and uncrimped fibres. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12751, Textiles — Sampling of fibres, yarns and fabrics for testing EN ISO 139, Textiles — Standard atmospheres for conditioning and testing (ISO 139:2005) EN ISO 1973, Textile fibres — Determination of linear density — Gravimetric method and vibroscope method (ISO 1973:1995) EN ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system (ISO 7500-1:2004) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 elasticity property of a fibre by virtue of which it tends to recover its original size and shape immediately after the removal of the force causing deformation 3.2 linear density mass per unit length of an essentially linear structure 3.3 constant-rate-of-extension (CRE) testing machine tensile testing machine provided with one clamp, which is virtually stationary, and another clamp, which moves with a constant speed throughout the test, the entire testing system being virtually free from deflection 3.4 gauge length distance between the two effective clamping or holding points of a testing device 3.5 initial length length of the test specimen between the two effective clamping or holding points at the required pretension, before testing SIST EN 15930:2010
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.