EN 13480-4:2017/A2:2023

SLOVENSKI STANDARD
01-februar-2024
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A2
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2017/A2:2023
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13480-4:2017/A2
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 23.040.01
English Version
Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4: Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This amendment A2 modifies the European Standard EN 13480-4:2017; it was approved by CEN on 28 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2017/A2:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modifications to 9.14.1, “General” . 4
2 Addition of new informative Annex C, “Example for the extension of the P value” . 4

European foreword
This document (EN 13480-4:2017/A2:2023) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024 and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of
EN 13480-4:2017.
This document includes the text of the amendment itself. The amended/corrected pages of
EN 13480
...