EN 28662-5:1994/A1:1995
(Amendment)Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)
Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of a pavement breaker or hammer operating under a specified load. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 5: Aufbruchhämmer und Spatenhämmer (ISO 8662-5:1992)
Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 5: Brise-béton, marteaux démolition et marteaux piqueurs (ISO 8662-5:1992)
L'IEC 61158-5-16:2007 définit les services fournis à l'utilisateur de FAL à la frontière entre l'utilisateur et la couche application du modèle de référence du bus de terrain, et la gestion des systèmes au niveau de la frontière entre la couche application et la gestion des systèmes selon le modèle de référence de bus de terrain. Elle spécifie la structure et les services de la couche application des bus de terrain, en conformité avec le Modèle de référence de base de l'OSI (ISO/CEI 7498) et la Structure de la couche application de l'OSI (ISO/CEI 9545). Cette première édition et les autres normes de la sous-série CEI 61158-5 annulent et remplacent la CEI 61158 5:2003. La présente édition de cette partie constitue un supplément technique. Cette partie et ses parties compagnes Type 16 remplacent aussi partiellement la CEI 61491:2002 qui est actuellement en cours de révision. La CEI 61491 sera éditée sous la forme d'un rapport technique. Elle comprend les changements suivants: suppression du précédent bus de terrain Type 6 en raison du manque de pertinence commerciale; ajout de nouveaux types de bus de terrain; division de la partie 5 de la troisième édition en parties multiples numérotées 5 2, 5 3, La présente version bilingue (2014-06) correspond à la version anglaise monolingue publiée en 2007-12.
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work - Amendment A1(ISO 8662-5:1992)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Aug-1995
- Withdrawal Date
- 14-Apr-2011
- Technical Committee
- CEN/TC 231 - Mechanical vibration and shock
- Drafting Committee
- CEN/TC 231/WG 2 - Hand-arm vibration
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Apr-2011
- Completion Date
- 15-Apr-2011
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 28-May-2011
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF International
Global independent organization facilitating standards development and certification.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
Sponsored listings
Frequently Asked Questions
EN 28662-5:1994/A1:1995 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992)". This standard covers: Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of a pavement breaker or hammer operating under a specified load. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
Supplements ISO 8662-1 and describes a type test procedure for establishing the magnitude of vibration in the handle of a pavement breaker or hammer operating under a specified load. The power tools covered may be electrically, pneumatically or hydraulically driven, or driven by means of an internal combustion engine. Annex A gives a definition of the basicentric coordinate system, Annex B a model test report.
EN 28662-5:1994/A1:1995 is classified under the following ICS (International Classification for Standards) categories: 13.160 - Vibration and shock with respect to human beings; 25.140.01 - Hand-held tools in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 28662-5:1994/A1:1995 has the following relationships with other standards: It is inter standard links to EN ISO 28927-10:2011, EN 28662-5:1994. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 28662-5:1994/A1:1995 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 28662-5:1994/A1:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2000
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5:
Pavement breakers and hammers for construction work - Amendment A1(ISO 8662
-5:1992)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 5:
Pavement breakers and hammers for construction work - Amendment A1(ISO 8662-
5:1992)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 5: Aufbruchhämmer und Spatenhämmer (ISO 8662-5:1992)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
5: Brise-béton, marteaux démolition et marteaux piqueurs (ISO 8662-5:1992)
Ta slovenski standard je istoveten z: EN 28662-5:1994/A1:1995
ICS:
13.160
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...