EN 1514-2:1997
(Main)Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
This standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092 Part 1 for PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 and up to and including DN 900.
Flansche und ihre Verbindungen - Maße für Dichtungen für Flansche mit PN-Bezeichnung - Teil 2: Spiraldichtungen für Stahlflansche
Diese Norm legt die Maße und Kennzeichnung von Spiraldichtungen für Flansche mit glatter Dichtfläche (ohne Dichtleiste) und Flansche mit Dichtleiste nach prEN 1092 Teil 1 fest für PN 10, PN 16, PN 25, PN 40, PN 63 und PN 100 und Nennweiten bis einschließlich DN 900.
Brides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 2: Joints spiralés pour utilisation avec des brides en acier
La présente norme prescrit les dimensions et le marquage des joints spiralés utilisés conjointement avec les faces de joints plates et surélevées conformes à la norme EN 1092, partie 1, pour les PN 10, PN 16, PN 25, PN 40, PN 63 et PN 100 et DN jusqu'à 900 inclus.
Prirobnice in prirobnični spoji - Mere tesnil za prirobnice z oznako PN - 2. del: Spiralna tesnila za jeklene prirobnice
General Information
- Status
- Withdrawn
- Publication Date
- 22-Apr-1997
- Withdrawal Date
- 17-May-2005
- Technical Committee
- CEN/TC 74 - Flanges and their joints
- Drafting Committee
- CEN/TC 74/WG 8 - Gaskets
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 18-May-2005
- Completion Date
- 18-May-2005
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1514-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges". This standard covers: This standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092 Part 1 for PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 and up to and including DN 900.
This standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092 Part 1 for PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 and up to and including DN 900.
EN 1514-2:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.80 - Seals for pipe and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1514-2:1997 has the following relationships with other standards: It is inter standard links to EN 1514-2:2005, EN 14772:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1514-2:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1514-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flansche und ihre Verbindungen - Maße für Dichtungen für Flansche mit PN-Bezeichnung - Teil 2: Spiraldichtungen für StahlflanscheBrides et leurs assemblages - Dimensions des joints pour les brides désignées PN - Partie 2: Joints spiralés pour utilisation avec des brides en acierFlanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges23.040.80Tesnila za cevne zvezeSeals for pipe and hose assemblies23.04
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...