EN ISO 8662-7:1997

EN ISO 8662-7:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997)". This standard covers: This part of iso 8662 specifies a laboratory method for measuring vibration et the handles of wrenches, screwdrivers and nut runners with impact, impulse, rapping or ratchet action. It is a type-test procedure for establishing the vibration value at the handles of the power tools when operating on a specified load. This part of ISO 8662 mainly covers power tools with 6.3 mm to 40 mm (1/4 in to 1 1/2 in) male or female square-drive output shafts: other drive geometries are also included. One-shot tools and stall-torque-type ratched wrenches are excluded from this part of ISO 8662. The power tools covered by this part of ISO 8662 may be pneumatically or hydraulically driven. It is intended that the results be used to compare different power tools or different models of the same power tool. With the operation specified for the power tools, the values obtained will give an indication of those found in real work situations when the power tool and the head of the fastener are well aligned.

This part of iso 8662 specifies a laboratory method for measuring vibration et the handles of wrenches, screwdrivers and nut runners with impact, impulse, rapping or ratchet action. It is a type-test procedure for establishing the vibration value at the handles of the power tools when operating on a specified load. This part of ISO 8662 mainly covers power tools with 6.3 mm to 40 mm (1/4 in to 1 1/2 in) male or female square-drive output shafts: other drive geometries are also included. One-shot tools and stall-torque-type ratched wrenches are excluded from this part of ISO 8662. The power tools covered by this part of ISO 8662 may be pneumatically or hydraulically driven. It is intended that the results be used to compare different power tools or different models of the same power tool. With the operation specified for the power tools, the values obtained will give an indication of those found in real work situations when the power tool and the head of the fastener are well aligned.

EN ISO 8662-7:1997 is classified under the following ICS (International Classification for Standards) categories: 13.160 - Vibration and shock with respect to human beings; 25.140.01 - Hand-held tools in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN ISO 8662-7:1997 has the following relationships with other standards: It is inter standard links to EN ISO 28927-2:2009, EN 50397-1:2020, HD 605 S2:2008, HD 620 S1:1996/A3:2007, EN 61442:2005, EN ISO 13628-5:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN ISO 8662-7:1997 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/BC/CEN/88/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN ISO 8662-7:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.