EN ISO 11200:2014/A1:2020

SLOVENSKI STANDARD
01-april-2020
Akustika - Emisija hrupa strojev in naprav - Smernice za uporabo temeljnih
standardov za ugotavljanje emisijskih ravni zvočnega tlaka na mestu delovanja in
na drugih opredeljenih mestih - Dopolnilo A1 (ISO 11200:2014/Amd 1:2018)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic
standards for the determination of emission sound pressure levels at a work station and
at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Leitlinien zur Anwendung
der Grundnormen zur Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz
und an anderen festgelegten Orten - Änderung 1 (ISO 11200:2014/Amd 1:2018)
Acoustique - Bruit émis par les machines et équipements - Guide d'utilisation des
normes de base pour la détermination des niveaux de pression acoustique d'émission
au poste de travail et en d'autres positions spécifiées - Amendement 1 (ISO
11200:2014/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 11200:2014/A1:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11200:2014/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 17.140.20
English Version
Acoustics - Noise emitted by machinery and equipment -
Guidelines for the use of basic standards for the
determination of emission sound pressure levels at a work
station and at other specified positions - Amendment 1
(ISO 11200:2014/Amd 1:2018)
Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und
équipements - Guide d'utilisation des normes de base Geräten - Leitlinien zur Anwendung der Grundnormen
pour la détermination des niveaux de pression zur Bestimmung von Emissions-Schalldruckpegeln am
acoustique d'émission au poste de travail et en d'autres Arbeitsplatz und an anderen festgelegten Orten -
positions spécifiées - Amendement 1 (ISO Änderung 1 (ISO 11200:2014/Amd 1:2018)
11200:2014/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 11200:2014; it was approved by CEN on 20 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11200:2014/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 11200:2014/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 11200:2014 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2020, and
conflicting national standards shall be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11200:2014/Amd 1:2018 has been approved by CEN as EN ISO 11200:2014/A1:2020
without any modification.
...