EN 12390-6:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancevPrüfung von Festbeton - Teil 6: Spaltzugfestigkeit von ProbekörpernEssai pour béton durci - Partie 6: Détermination de la résistance en traction par fendage d'éprouvettesTesting hardened concrete - Part 6: Tensile splitting strength of test specimens91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 12390-6:2009SIST EN 12390-6:2010en,fr,de01-maj-2010SIST EN 12390-6:2010SLOVENSKI
STANDARDSIST EN 12390-6:2001/AC:2004SIST EN 12390-6:2001oSIST prEN 12390-6:20081DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12390-6
December 2009 ICS 91.100.30 Supersedes EN 12390-6:2000English Version
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Essais sur béton - Partie 6 : Détermination de la résistance en traction par fendage d'éprouvettes
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern This European Standard was approved by CEN on 1 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12390-6:2009: ESIST EN 12390-6:2010

Determination of tensile splitting strength using cubic or prismatic specimens . 10 SIST EN 12390-6:2010

Specification for testing machines  Part 5: Flexural strength of test specimens  Part 6: Tensile splitting strength of test specimens  Part 7: Density of hardened concrete  Part 8: Depth of penetration of water under pressure The main change from the previous edition of this European Standard has been to provide an alternative specification for packing strips and requires the selected loading rate to be applied after the initial load does not exceed approximately 20 % of the anticipated failure load. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...