EN ISO 2702:1994
(Main)Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)
Specifies the characteristics of screws with threads from ST2,2 to ST8. Describes the test methods to be used. Figure 1 shows a torsional test apparatus.
Wärmebehandelte Blechschrauben aus Stahl - Mechanische Eigenschaften (ISO 2702:1992)
Diese Internationale Norm legt die Eigenschaften von wärmebehandelten (einsatzgehärteten und angelassenen) Blechschrauben mit Blechschraubengewinde von ST 2,2 bis ST 8 nach ISO 1478 zusammen mit den zugehörigen Prüfmethoden fest.
Vis à tôle en acier traité thermiquement - Caractéristiques mécaniques (ISO 2702:1992)
La présente Norme internationale prescrit les caractéristiques mécaniques des vis à tôle en acier traité thermiquement, de filetage ST2,2 à ST8 inclus conforme à l'ISO 1478, ainsi que les méthodes d'essai correspondantes.
Toplotno obdelani pločevinski vijaki - Mehanske lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 30-Jul-1994
- Withdrawal Date
- 30-Apr-2011
- Technical Committee
- CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-May-2011
- Completion Date
- 01-May-2011
Relations
- Replaced By
EN ISO 2702:2011 - Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) - Effective Date
- 07-May-2011
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN ISO 2702:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)". This standard covers: Specifies the characteristics of screws with threads from ST2,2 to ST8. Describes the test methods to be used. Figure 1 shows a torsional test apparatus.
Specifies the characteristics of screws with threads from ST2,2 to ST8. Describes the test methods to be used. Figure 1 shows a torsional test apparatus.
EN ISO 2702:1994 is classified under the following ICS (International Classification for Standards) categories: 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 2702:1994 has the following relationships with other standards: It is inter standard links to EN ISO 2702:2011, EN ISO 25239-4:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 2702:1994 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 2702:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1996
7RSORWQRREGHODQLSORþHYLQVNLYLMDNL0HKDQVNHODVWQRVWL
Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)
Wärmebehandelte Blechschrauben aus Stahl - Mechanische Eigenschaften (ISO
2702:1992)
Vis a tôle en acier traité thermiquement - Caractéristiques mécaniques (ISO 2702:1992)
Ta slovenski standard je istoveten z: EN ISO 2702:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...