EN ISO 9539:2010/A1:2013

SLOVENSKI STANDARD
01-maj-2014
Oprema za plamensko varjenje - Materiali za naprave za plamensko varjenje,
rezanje in sorodne postopke - Dopolnilo A1 (ISO 9539:2010/AMD 1:2013)
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied
processes - Amendment 1 (ISO 9539:2010/AMD 1:2013)
Gasschweißgeräte - Werkstoffe für Geräte für Einrichtungen zum Gasschweißen,
Schneiden und verwandte Prozesse - Änderung 1 (ISO 9539:2010/AMD 1:2013)
Matériel de soudage aux gaz - Matériaux utilisés pour le matériel de soudage aux gaz,
coupage et techniques connexes - Amendement 1 (ISO 9539:2010/AMD 1:2013)
Ta slovenski standard je istoveten z: EN ISO 9539:2010/A1:2013
ICS:
25.160.30 Varilna oprema Welding equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9539:2010/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2013
ICS 25.160.30
English Version
Gas welding equipment - Materials for equipment used in gas
welding, cutting and allied processes (ISO 9539:2010/AMD
1:2013)
Matériel de soudage aux gaz - Matériaux utilisés pour le Gasschweißgeräte - Werkstoffe für Geräte für
matériel de soudage aux gaz, coupage et techniques Einrichtungen zum Gasschweißen, Schneiden und
connexes (ISO 9539:2010/AMD 1:2013) verwandte Prozesse - Änderung 1 (ISO 9539:2010/AMD
1:2013)
This amendment A1 modifies the European Standard EN ISO 9539:2010; it was approved by CEN on 9 November 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9539:2010/A1:2013 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 9539:2010/A1:2013) has been prepared by Technical Committee ISO/TC 44
“Welding and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 9539:2010 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and
conflicting national standards shall be withdrawn at the latest by June 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9539:2010/AMD 1:2013 has been approved by CEN as EN ISO 9539:2010/A1:2013 without
any modification.
INTERNATIONAL
...