EN 570:1994
(Main)Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications
Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications
This European Standard specifies the technical conditions for inspection and delivery, tolerances on dimensions and form and other requirements for flat or preformed aluminium and aluminium alloy slugs for impact extrusion. It applies to slugs produced either by punching of rolled products or by cutting of extruded products. This standard does not apply to slugs produced from unwrought cast ingots. Slugs covered in this standard are suitable for the manufacture of impact extruded parts for packaging and industrial applications.
Aluminium und Aluminiumlegierungen - Butzen zum Fließpressen aus Halbzeug hergestellt - Spezifikationen
Diese Europäische Norm legt die Technischen Lieferbedingungen, Grenzabmasse, Formtoleranzen und sonstige Anforderungen für ebene oder vorgeformte Butzen zum Fliesspressen aus Aluminium und Aluminium-Knetlegierungen fest. Sie gilt für Butzen, die durch Ausstanzen von Walzerzeugnissen oder durch Sägen von stranggepressten Erzeugnissen hergestellt werden. Diese Norm gilt nicht für Butzen, die aus Gusserzeugnissen hergestellt werden. Butzen nach dieser Norm eignen sich zum Herstellen von Fliesspressteilen zum Verpacken und für industrielle Anwendungen.
Aluminium et alliages d'aluminium - Pions de filage par choc obtenus à partir de produits corroyés - Spécifications
La présente norme européenne spécifie les conditions techniques de contrôle et de livraison, les tolérances sur dimensions et forme et autres exigences applicables aux pions de filage par choc plats ou préformés en aluminium et en alliages d'aluminium. Elle s'applique aux pions obtenus par poinçonnage de produits laminés ou par découpage de produits filés. La présente norme ne s'applique pas aux pions produits à partir de produits coulés non corroyés. Les pions couverts sont utilisables pour la fabrication de pièces filées par choc pour des applications industrielles et de conditionnement.
Aluminij in aluminijeve zlitine - Gneteni polizdelki za udarno iztiskovanje - brizganje (okrogli - rondele z luknjo ter brez nje - in kvadrasti) - Specifikacije
General Information
- Status
- Withdrawn
- Publication Date
- 29-Aug-1994
- Withdrawal Date
- 23-Jan-2007
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 11 - Slugs for impact extrusion
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Jan-2007
- Completion Date
- 24-Jan-2007
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 570:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications". This standard covers: This European Standard specifies the technical conditions for inspection and delivery, tolerances on dimensions and form and other requirements for flat or preformed aluminium and aluminium alloy slugs for impact extrusion. It applies to slugs produced either by punching of rolled products or by cutting of extruded products. This standard does not apply to slugs produced from unwrought cast ingots. Slugs covered in this standard are suitable for the manufacture of impact extruded parts for packaging and industrial applications.
This European Standard specifies the technical conditions for inspection and delivery, tolerances on dimensions and form and other requirements for flat or preformed aluminium and aluminium alloy slugs for impact extrusion. It applies to slugs produced either by punching of rolled products or by cutting of extruded products. This standard does not apply to slugs produced from unwrought cast ingots. Slugs covered in this standard are suitable for the manufacture of impact extruded parts for packaging and industrial applications.
EN 570:1994 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 570:1994 has the following relationships with other standards: It is inter standard links to EN 570:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 570:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Gneteni polizdelki za udarno iztiskovanje - brizganje (okrogli - rondele z luknjo ter brez nje - in kvadrasti) - SpecifikacijeAluminium und Aluminiumlegierungen - Butzen zum Fließpressen aus Halbzeug hergestellt - SpezifikationenAluminium et alliages d'aluminium - Pions de filage par choc obtenus a partir de produits corroyés - SpécificationsAluminium and aluminium alloys
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...