EN ISO 1043-1:2011/A1:2016

SLOVENSKI STANDARD
01-julij-2016
3ROLPHUQLPDWHULDOL6LPEROLLQNUDWLFHGHO2VQRYQLSROLPHULLQQMLKRYH
]QDþLOQRVWL,62$PG
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special
characteristics (ISO 1043-1:2011/Amd 1:2016)
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 1: Basis-Polymere und ihre
besonderen Eigenschaften (ISO 1043-1:2011/Amd 1:2016)
Plastiques - Symboles et termes abrégés - Partie 1: Polymères de base et leurs
caractéristiques spéciales (ISO 1043-1:2011/Amd 1:2016)
Ta slovenski standard je istoveten z: EN ISO 1043-1:2011/A1:2016
ICS:
01.075 Simboli za znake Character symbols
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 1043-1:2011/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 83.080.01
English Version
Plastics - Symbols and abbreviated terms - Part 1: Basic
polymers and their special characteristics (ISO 1043-
1:2011/Amd 1:2016)
Plastiques - Symboles et termes abrégés - Partie 1: Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil
Polymères de base et leurs caractéristiques spéciales 1: Basis-Polymere und ihre besonderen Eigenschaften
(ISO 1043-1:2011/Amd 1:2016) (ISO 1043-1:2011/Amd 1:2016)
This amendment A1 modifies the European Standard EN ISO 1043-1:2011; it was approved by CEN on 11 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1043-1:2011/A1:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 1043-1:2011/A1:2016) has been prepared by Technical Committee ISO/TC 61
“Plastics” in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is
held by NBN.
This Amendment to the European Standard EN ISO 1043-1:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2016,
and conflicting national standards shall be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
...