EN 13451-3:2011+A2:2014
(Main)Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
This European Standard specifies safety requirements and test methods for inlets and outlets for water/air and water/air based leisure features involving water movement, in addition to the general safety requirements of EN 13451-1:2011.
The requirements of this specific standard take priority over those in EN 13451-1:2011.
This part of EN 13451 is applicable to swimming pool equipment designed for:
- the introduction and/or extraction of water for treatment or leisure purposes;
- the introduction of air for leisure purposes;
- water leisure features involving the movement of water.
NOTE The above items are identified with the general term devices.
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen
Diese Europäische Norm legt zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach EN 13451-1:2011 sicherheitstechnische Anforderungen und Prüfverfahren für Einläufe und Ausläufe sowie für Wasserattraktionen in Verbindung mit Luft/Wasser, die eine Wasserbewegung bewirken, fest.
Die Anforderungen dieser besonderen Norm haben Vorrang gegenüber denen in EN 13451-1:2011.
Dieser Teil der EN 13451 gilt für Schwimmbadgeräte, hergestellt für:
- den Einlauf und/oder Auslauf von Wasser für die Wasseraufbereitung oder für Wasserattraktionen;
- den Einlauf von Luft für Wasserattraktionen;
- Wasserattraktionen, die Wasser in Bewegung setzen.
ANMERKUNG Die oben genannten Gegenstände werden nachfolgend mit dem allgemeinen Begriff Bauteil bezeichnet.
Équipement de piscine - Partie 3: Exigences de sécurité et méthodes d'essai complémentaires propres aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d’extraction d'eau/d’air
La présente Norme spécifie les exigences de sécurité et les méthodes d'essai applicables aux pièces d'aspiration et de refoulement d’eau/air et aux équipements de loisirs aquatiques disposant d'introduction et d’extraction d'eau/d’air impliquant un mouvement d’eau, en complément des exigences générales relatives à la sécurité de l’EN 13451-1:2011.
Les exigences présentées dans cette norme spécifique ont la priorité sur celles de l’EN 13451-1:2011.
La présente partie de l’EN 13451 est applicable aux équipements de piscine conçus pour :
- l'introduction et/ou l'extraction d'eau à des fins de traitement ou de loisirs ;
- l'introduction d'air à des fins de loisirs ;
- les équipements de loisirs aquatiques impliquant le mouvement de l'eau.
NOTE Les éléments ci-dessus sont identifiés par le terme général dispositifs.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za plavalne bazene - 3. del: Dodatne posebne varnostne zahteve in preskusne metode za bazenski pribor za pripravo vodeSchwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-LuftattraktionenÉquipement de piscine - Partie 3: Exigences de sécurité et méthodes d'essai complémentaires propres aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d’extraction d'eau/d’airSwimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 13451-3:2011+A2:2014SIST EN 13451-3:2011+A2:2014en,fr,de01-oktober-2014SIST EN 13451-3:2011+A2:2014SLOVENSKI
STANDARDSIST EN 13451-3:2011+A1:20131DGRPHãþD
SIST EN 13451-3:2011+A2:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13451-3:2011+A2
May 2014 ICS 97.220.10 Supersedes EN 13451-3:2011+A1:2013
English Version
Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
Équipement de piscine - Partie 3: Exigences de sécurité et méthodes d'essai complémentaires propres aux pièces d'aspiration et de refoulement et aux équipements de loisirs aquatiques disposant d'introduction et d'extraction d'eau/d'air
Schwimmbadgeräte - Teil 3: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Ein- und Ausläufe sowie Wasser-Luftattraktionen This European Standard was approved by CEN on 29 July 2011 and includes Amendment 1 approved by CEN on 14 June 2013 and Amendment 2 approved by CEN on 6 March 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-3:2011+A2:2014 E SIST EN 13451-3:2011+A2:2014
Obstruction test for floor outlets suction grills . 23 A.1 General . 23 A.2 Test device . 23 A.3 Water flow . 25 A.4 Procedure . 25 A.5 Evaluation . 26 Annex B (informative)
Water speed . 27 B.1 General . 27 B.2 Calculation methods . 27 B.3 Test Methods . 27 B.4 Design stage . 28 B.5 Suction points in operation . 29 Annex C (normative)
Entrapment of hair in slits . 30 C.1 Testing equipment . 30 C.2 Test method . 30 C.3 Evaluation . 30 Bibliography . 31
SIST EN 13451-3:2011+A2:2014
!" and #$. The European Standard EN 13451 Swimming pool equipment consists of: — Part 1: General safety requirements and test methods; — Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; — Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features; — Part 4: Additional specific safety requirements and test methods for starting platforms; — Part 5: Additional specific safety requirements and test methods for lane lines; — Part 6: Additional specific safety requirements and test methods for turning boards; — Part 7: Additional specific safety requirements and test methods for water polo goals; — Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment; — Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads. In relation to EN 13451-3:2001 and EN 13451-8:2001, the following main amendments have been made: a) requirements of EN 13451-8:2001 were incorporated; b) requirements of the hair entrapment tests were changed; c) test methods have been widened and improved. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, SIST EN 13451-3:2011+A2:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.