EN 12078:1998
(Main)Zero governors for gas burners and gas burning appliances
Zero governors for gas burners and gas burning appliances
This standard specifies he safety, constructional and performance requirements for zero pressure governors, hereafter referred to as zero governors, intended for use with gas appliances. It also gives the test procedures for evaluating these requirements and information necessary for the purchaser and user. This standard applies to zero governors for gas-burning appliances that may be used and tested independently of these appliances. These zero governors are suitable for one or more of the fuel gases of the 1st, 2nd and 3rd families, at inlet pressures up to and including 200 mbar. This standard does not cover : a) zero governors connected directly to distribution pipework or to container that maintains a standard distribution pressure; b) zero governors intended for gas appliances to be installed out-of-doors and exposed to the environment. This standard covers type testing only.
Nulldruckregler für Gasbrenner und Gasgeräte
Diese Norm legt Anforderungen an die Sicherheit sowie Bau- und Funktionsanforderungen an Atmosphärendruck-Regler, nachstehend Nulldruckregler genannt, fest, die zur Verwendung in Gasgeräten vorgesehen sind. Sie beschreibt die Prüfverfahren, nach denen die Einhaltung der Anforderungen beurteilt wird und nennt die erforderlichen Informationen für Käufer und Anwender. Diese Normgilt für Nulldruckregler in Gasgeräten, die unabhängig von diesen Gasgeräten gebraucht und geprüft werden können.
Détendeurs à zéro pour brûleurs à gaz et appareils à gaz
La présente norme européenne précise les spécifications de sécurité, de construction et de fonctionnement des détendeurs à zéro pour brûleurs à gaz et appareils à gaz, dénommés ci-après "détendeurs". Elle donne aussi les procédures d'essais permettant de vérifier la conformité à ces exigences ainsi que les informations nécessaires à l'acheteur et à l'utilisateur. Elle s'applique aux détendeurs destinés à équiper des brûleurs ou des appareils mais qui peuvent fonctionner et être essayés indépendamment de ces appareils.
Regulator ničelnega tlaka za plinske gorilnike in plinske aparate)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Aug-1998
- Withdrawal Date
- 05-Apr-2011
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 06-Apr-2011
- Completion Date
- 06-Apr-2011
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 12078:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Zero governors for gas burners and gas burning appliances". This standard covers: This standard specifies he safety, constructional and performance requirements for zero pressure governors, hereafter referred to as zero governors, intended for use with gas appliances. It also gives the test procedures for evaluating these requirements and information necessary for the purchaser and user. This standard applies to zero governors for gas-burning appliances that may be used and tested independently of these appliances. These zero governors are suitable for one or more of the fuel gases of the 1st, 2nd and 3rd families, at inlet pressures up to and including 200 mbar. This standard does not cover : a) zero governors connected directly to distribution pipework or to container that maintains a standard distribution pressure; b) zero governors intended for gas appliances to be installed out-of-doors and exposed to the environment. This standard covers type testing only.
This standard specifies he safety, constructional and performance requirements for zero pressure governors, hereafter referred to as zero governors, intended for use with gas appliances. It also gives the test procedures for evaluating these requirements and information necessary for the purchaser and user. This standard applies to zero governors for gas-burning appliances that may be used and tested independently of these appliances. These zero governors are suitable for one or more of the fuel gases of the 1st, 2nd and 3rd families, at inlet pressures up to and including 200 mbar. This standard does not cover : a) zero governors connected directly to distribution pipework or to container that maintains a standard distribution pressure; b) zero governors intended for gas appliances to be installed out-of-doors and exposed to the environment. This standard covers type testing only.
EN 12078:1998 is classified under the following ICS (International Classification for Standards) categories: 23.060.40 - Pressure regulators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12078:1998 has the following relationships with other standards: It is inter standard links to EN 88-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12078:1998 is associated with the following European legislation: EU Directives/Regulations: 2009/142/EC, 90/396/EEC; Standardization Mandates: M/BC/CEN/89/6. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12078:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-1999
5HJXODWRUQLþHOQHJDWODND]DSOLQVNHJRULOQLNHLQSOLQVNHDSDUDWH
Zero governors for gas burners and gas burning appliances
Nulldruckregler für Gasbrenner und Gasgeräte
Détendeurs a zéro pour bruleurs a gaz et a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...