EN 12007-2:2000
(Main)Gas supply systems - Gas pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
Gas supply systems - Gas pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
This standard describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of prEN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 10 bar; b) an operating temperature between -20°C and +40°C. This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
Gasversorgungssysteme - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 2: Besondere funktionale Empfehlungen für Polyethylen (MOP bis einschließlich 10 bar)
Diese Norm beschreibt, in Ergänzung zu den allgemeinen funktionalen Empfehlungen von prEN 12007-1, die besonderen funktionalen Empfehlungen an Rohrleitungen aus Polyethylen, einschließlich der Verbindungen zwischen PE und anderen Werkstoffen, für: a) bis zu einem maximal zulässigen Betriebsdruck (MOP) bis zu 10 bar; b) und einer Betriebstemperatur von -20°C bis +40°C. Diese Europäische Norm enthält allgemeine Grundsätze der Gasversorgung.
Systèmes d'alimentation en gaz - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 2: Recommandations fonctionnelles spécifiques pour le polyéthylène (MOP inférieure ou égale à 10 bar)
La présente norme européenne décrit, en complément des recommandations fonction elles générales du prEN 12007-1, les recommandations fonctionnelles spécifiques applicables aux canalisations en polyéthylène (PE) pour: a) une pression maximale de service (MOP) inférieure ou égale à 10 bar; b) une température de service comprise entre -20°C et +40°C. La présente norme européenne spécifie les principes de base communs pour les systèmes d'alimentation en gaz.
Sistemi oskrbe s plinom - Cevovodni sistemi za najvišji delovni tlak do vključno 16 bar - 2. del: Posebna funkcionalna priporočila za polietilen (najvišji delovni tlak do vključno 10 bar)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 31-Jul-2012
- Technical Committee
- CEN/TC 234 - Gas infrastructure
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Aug-2012
- Completion Date
- 01-Aug-2012
Relations
- Effective Date
- 08-Aug-2012
Frequently Asked Questions
EN 12007-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Gas supply systems - Gas pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar)". This standard covers: This standard describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of prEN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 10 bar; b) an operating temperature between -20°C and +40°C. This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
This standard describes the specific functional recommendations for polyethylene (PE) pipelines in addition to the general functional recommendations of prEN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 10 bar; b) an operating temperature between -20°C and +40°C. This European Standard specifies common basic principles for gas supply systems. Users of this European Standard should be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries.
EN 12007-2:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12007-2:2000 has the following relationships with other standards: It is inter standard links to EN 12007-2:2012. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12007-2:2000 is associated with the following European legislation: EU Directives/Regulations: 90/531/EEC, 93/38/EEC; Standardization Mandates: M/017. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12007-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gasversorgungssysteme - Rohrleitungen mit einem maximal zulässigen Betriebsdruck bis einschließlich 16 bar - Teil 2: Besondere funktionale Empfehlungen für Polyethylen (MOP bis einschließlich 10 bar)Systemes d'alimentation en gaz - Canalisations pour pression maximale de service inférieure ou égale a 16 bar - Partie 2: Recommandations fonctionnelles spécifiques pour le polyéthylene (MOP inférieure ou égale a 10 bar)Gas supply systems - Gas pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...