EN 763:1994
(Main)Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating
This standard specifies methods for visually assessing the effects of heating on injection-moulded thermoplastics fittings, including cracking or splitting induced by residual stress. It is applicable to fittings for pressure and non-pressure applications, e.g. flanged fittings, fittings incorporating elastomeric sealing rings and fittings consisting of the assembly of a number of moulded parts.
Kunststoff-Rohrleitung- und Schutzrohrsysteme - Spritzguß-Formstücke aus Thermoplasten - Prüfverfahren für die visuelle Beurteilung der Einflüsse durch Warmlagerung
Diese Norm legt Verfahren zur visuellen Beurteilung des Einflusses der Erwärmung von Spritzguss-Formstücken aus Thermoplasten, einschliesslich durch Eigenspannungen hervorgerufene Rissbildung oder Aufblätterung fest. Sie ist anwendbar auf Formstücke für Druckrohrleitungen und drucklose Rohrleitungen, z.B. Formstücke mit Flanschen, Formstücke mit elastomeren Dichtringen, wowie für Formstücke, die aus mehreren Spritzgusstilen zusammengesetzt werden.
Systèmes de canalisations et de gaines en plastiques - Raccords thermoplastiques moulés par injection - Méthode d'essai pour estimer visuellement les effets du chauffage
Cette norme prescrit des méthodes pour estimer visuellement les effets du chauffage sur les raccords thermoplastiques moulés par injection y compris les fissures et cassures induites par les contraintes résiduelles. Elle est applicable aux raccords pour des applications avec et sans pression, y compris, par exemple, les raccords à brides, les raccords avec bague d'étanchéité en élastomère et les raccords constitués par un assemblage de pièces moulées.
Cevni sistemi iz polimernih materialov - Plastomerni fitingi, oblikovani z injekcijskim vbrizgavanjem - Preskusna metoda za vizualno oceno vpliva segrevanja
General Information
- Status
- Withdrawn
- Publication Date
- 29-Apr-1994
- Withdrawal Date
- 14-Feb-2005
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Feb-2005
- Completion Date
- 15-Feb-2005
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 763:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test method for visually assessing effects of heating". This standard covers: This standard specifies methods for visually assessing the effects of heating on injection-moulded thermoplastics fittings, including cracking or splitting induced by residual stress. It is applicable to fittings for pressure and non-pressure applications, e.g. flanged fittings, fittings incorporating elastomeric sealing rings and fittings consisting of the assembly of a number of moulded parts.
This standard specifies methods for visually assessing the effects of heating on injection-moulded thermoplastics fittings, including cracking or splitting induced by residual stress. It is applicable to fittings for pressure and non-pressure applications, e.g. flanged fittings, fittings incorporating elastomeric sealing rings and fittings consisting of the assembly of a number of moulded parts.
EN 763:1994 is classified under the following ICS (International Classification for Standards) categories: 23.040.20 - Plastics pipes; 23.040.45 - Plastics fittings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 763:1994 has the following relationships with other standards: It is inter standard links to EN ISO 580:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 763:1994 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 763:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-1997
Cevni sistemi iz polimernih materialov - Plastomerni fitingi, oblikovani z
injekcijskim vbrizgavanjem - Preskusna metoda za vizualno oceno vpliva
segrevanja
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Test
method for visually assessing effects of heating
Kunststoff-Rohrleitung- und Schutzrohrsysteme - Spritzguß-Formstücke aus
Thermoplasten - Prüfverfahren für die visuelle Beurteilung der Einflüsse durch
Warmlagerung
Systemes de canalisations et de gaines en plastiques - Raccords thermoplastiques
moulés par injection - Méthode d'essai pour estimer visuellement les effets du chauffage
Ta slovenski standard je istoveten z: EN 763:1994
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...