EN ISO 150:2018

SLOVENSKI STANDARD
01-marec-2019
1DGRPHãþD
SIST EN ISO 150:2007
Surova, rafinirana in kuhana olja iz lanenih semen za barve in lake - Specifikacije
in preskusne metode (ISO 150:2018)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods
of test (ISO 150:2018)
Rohleinöl, Lackleinöl und Leinölfirnis für Beschichtungsstoffe - Anforderungen und
Prüfung (ISO 150:2018)
Huiles de lin brutes, raffinées et cuites, pour peintures et vernis - Spécifications et
méthodes d'essai (ISO 150:2018)
Ta slovenski standard je istoveten z: EN ISO 150:2018
ICS:
87.060.99 Druge sestavine barv Other paint ingredients
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 150
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 87.060.20 Supersedes EN ISO 150:2007
English Version
Raw, refined and boiled linseed oil for paints and
varnishes - Specifications and methods of test (ISO
150:2018)
Huiles de lin brutes, raffinées et cuites, pour peintures Rohleinöl, Lackleinöl und Leinölfirnis für
et vernis - Spécifications et méthodes d'essai (ISO Beschichtungsstoffe - Anforderungen und Prüfung (ISO
150:2018) 150:2018)
This European Standard was approved by CEN on 11 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 150:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 150:2018) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 150:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 150:2018 has been approved by CEN as EN ISO 150:2018 without any modification.

INTERNATIONAL ISO
STANDARD 150
Third edition
2018-11
Raw, refined and boiled linseed oil for
paints and varnishes — Specifications
and methods of test
Huiles de lin brutes, raffinées et cuites, pour peintures et vernis —
Spécifications et méthodes d'essai
Reference number
ISO 150:2018(E)
©
ISO 2018
ISO 150:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 150:2018(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Required characteristics and their tolerances . 2
5 Sampling . 3
6 Clarity . 3
6.1 Raw oil . 3
6.2 Alkali-refined, acid-refined and boiled oil . 4
7 Phosphoric acid test (PAT value) (for raw linseed oil only) . 4
7.1 Principle . 4
7.2 Reagents. 4
7.3 Apparatus . 4
7.4 Preparation of the sample . 6
7.5 Procedure . 6
7.6 Expression of results . 7
7.7 Precision . 7
7.7.1 Repeatability . 7
7.7.2 Reproducibility . 7
8 Assessment of br eak in alkali-refined linseed oils . 8
8.1 General . 8
8.2 Principle . 8
8.3 Reagent . 8
8.4 Apparatus . 8
8.5 Procedure . 8
8.6 Expression of results . 8
9 Test report . 8
Annex A (informative) Standard values for the composition of fatty acids of raw linseed oil .10
ISO 150:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes.
This third edition cancels and replaces the second edition (ISO 150:2006), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the determination of the composition of fatty acids in accordance with ISO 12966 has been specified;
— ISO 2811-3 (oscillation method) has been added for determination of density;
— the determination of drying time has been deleted;
— reference to the use of the Lovibond colour system as an alternative to the Gardner colour scale has
been deleted because the visual method is too inaccurate;
— sampling in accordance with ISO 15528 has been replaced by sampling in accordance with ISO 5555;
— the preparation of samples in accordance with ISO 661 has been added;
— the standard values for the composition of fatty acids have been revised;
— the normative references in Clause 2 have been updated and the text has been editorially revised.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members
...