iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13402-3:2017

(Main)

Size designation of clothes - Part 3: Size labelling based on body measurements and intervals

Size designation of clothes - Part 3: Size labelling based on body measurements and intervals

This European Standard describes a flexible sizing system based on body dimensions and the related size labelling information for consumers, by the use of a standard pictogram.
Examples of labelling clothing with the standard pictogram (see EN 13402 1) are given in Clause 5 in this document.
Examples of tables for body measurements and intervals are given in Annex A (informative) to be used for compiling garment sizes for men, women, boys, girls and infants.
Garment dimensions are not contained in this document.

Größenbezeichnung von Bekleidung - Teil 3: Größenbezeichnung auf der Grundlage von Körpermaßen und Sprungwerten

Diese Europäische Norm beschreibt ein flexibles Größenbestimmungssystem basierend auf den Körpermaßen und die damit verbundenen Größenangaben für Verbraucher unter Zuhilfenahme eines Standard-Piktogramms.
Beispiele für die Kennzeichnung von Bekleidungsstücken mit dem Standard-Piktogramm (siehe EN 13402 1) sind in Abschnitt 5 in diesem Dokument enthalten.
Beispiele für Körpermaße und Sprungwerte sind in Anhang A (informativ) zur Anwendung für die Zusammenstellung von Bekleidungsgrößen für Männer, Frauen, Jungen, Mädchen und Kleinkinder enthalten.
Maße für Bekleidungsstücke werden in diesem Dokument nicht angegeben.

Désignation des tailles de vêtements - Partie 3 : Étiquetage de la taille sur la base des mesures corporelles et des intervalles

La présente Norme européenne décrit un système de tailles flexible fondé sur les dimensions
corporelles, ainsi que les informations d’étiquetage des tailles associées pour les consommateurs, au
moyen d’un pictogramme normalisé.
Des exemples d'étiquetage des vêtements au moyen du pictogramme normalisé (voir l’EN 13402‐1)
sont fournis dans l’Article 5 du présent document.
Des exemples de tableaux de mesures corporelles et d'intervalles sont fournis dans l’Annexe A
(informative) et doivent être utilisés pour compiler les tailles de vêtements pour les hommes, les
femmes, les garçons, les filles et les enfants en bas âge.
Le présent document ne couvre pas les dimensions des vêtements.

Označevanje velikosti oblačil - 3. del: Telesne mere in koraki

Ta dokument uvaja preglednice za telesne mere in korake, ki se uporabljajo za izračun standardnih velikosti oblačil za moške, ženske, dečke, deklice in dojenčke. Velikosti oblačil niso navedene v tem dokumentu.

General Information

Status
Published
Publication Date
12-Sep-2017
Withdrawal Date
30-Mar-2018
ICS
61.020 - Clothes
Technical Committee
CEN/TC 248 - Textiles and textile products
Drafting Committee
CEN/TC 248/WG 10 - Size system of clothing
Current Stage
Ref Project
SIST EN 13402-3:2017 - Size designation of clothes - Part 3: Body measurements and intervals

Relations

Replaces
EN 13402-3:2013 - Size designation of clothes - Part 3: Body measurements and intervals
Effective Date
19-Feb-2014

Buy Standard

EN 13402-3:2017EN 13402-3:2017
PreviousNext
Standard
EN 13402-3:2017
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Größenbezeichnung von Bekleidung - Teil 3: Körpermaße und SprungwerteDésignation des tailles de vêtements - Partie 3 : Mesures du corps humain et intervallesSize designation of clothes - Part 3: Body measurements and intervals61.0202EODþLODClothesICS:Ta slovenski standard je istoveten z:EN 13402-3:2017SIST EN 13402-3:2017en,fr,de01-november-2017SIST EN 13402-3:2017SLOVENSKI
STANDARDSIST EN 13402-3:20131DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13402-3
September
t r s y ICS
x sä r t r Supersedes EN
s u v r tæ uã t r s uEnglish Version
Size designation of clothes æ Part
uã Size labelling based on body measurements and intervals Désignation des tailles de vêtements æ Partie
u ã Mesures du corps humain et intervalles
Größenbezeichnung von Bekleidung æ Teil
uã Größenbezeichnung auf der Grundlage von Körpermaßen und Sprungwerten This European Standard was approved by CEN on
t x June
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u v r tæ uã t r s y ESIST EN 13402-3:2017

Examples of measurement and interval tables . 14 A.1 General . 14 A.2 Tables . 14 A.2.1 Men . 14 A.2.2 Women . 18 A.2.3 Boys, girls and infants . 24 A.2.4 Head, hand and foot . 33 A.2.5 Letter sizes . 35 Bibliography . 36
To achieve flexibility, between the primary and secondary dimensions, examples of alternatives are defined in Annex A. SIST EN 13402-3:2017
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17528:2022(Main)
Clothing - Physiological effects - Measurement of water vapour resistance by means of a sweating manikin
SIST EN 17528:2022

This document specifies the requirements of the sweating manikin and the test procedure used to measure the water vapour resistance of a clothing ensemble, as it becomes effective for the wearer in practical use in a defined environment, with the wearer either standing or moving. This water vapour resistance, among other parameters, can be used to determine the effect of clothing on the physiology of the wearer in specific climate/activity scenarios.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17394-3:2021(Main)
Textiles and textile products - Part 3: Safety of children's clothing - Security of attachment of metal mechanically applied press fasteners - Test method
SIST-TS CEN/TS 17394-3:2024

This document defines a test method for security of attachment of functional and decorative metal mechanically applied press fasteners to children's clothing including for example gloves, hats, scarves, hosiery, ties, and textile belts.
IMPORTANT: Eyelets and rivets cannot be tested by this method as the integrity of the component when attached to textile fabrics is destroyed in the gripping action. Eyelets and rivets are assessed as described in CEN/TS 17394 4:2021.
This document does not apply to:
a)   child care articles;
b)   shoes, boots and similar footwear;
c)   toys (see NOTE 2);
d)   other articles sold with clothing.
NOTE 1   The above items are covered by other CEN Technical Committees and as such are out of the scope of this document.
NOTE 2   Disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.
The scope of this document is limited to metal mechanically applied components. Work is in progress to develop standards for other garment components.
- EN 17394 2:2020, Textiles and textile products - Part 2: Safety of children's clothing - Security of attachment of buttons - Test method
- CEN/TS 17394 4:2021, Textiles and textile products - Part 4: Safety of children's clothing - Security of attachment of components except buttons and metal mechanically applied press fasteners - Test method
Performance requirements are provided in CEN/TS 17394 1:2021.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17394-4:2021(Main)
Textiles and textile products - Part 4: Safety of children's clothing - Security of attachment of components except buttons and metal mechanically applied press fasteners - Test method
SIST-TS CEN/TS 17394-4:2024

The method described in this document complements
- EN 17394 2:2020, Textiles and textile products - Part 2: Safety of children's clothing - Security of attachment of buttons - Test method
- CEN/TS 17394 3:2021, Textiles and textile products - Part 3: Safety of children's clothing - Security of attachment of metal mechanically applied press fasteners - Test method
and is applicable to all other components including labels, badges, sequins, rhinestones, rivets, eyelets and non-metal press fasteners, which are too small to be gripped in test equipment jaws or their integrity is disrupted by gripping.
The performance requirements are provided in CEN/TS 17394 1:2021.
The method is an extremely aggressive wash method has been developed to assess if the components remain attached.
It is specifically applicable to clothing, where the detachment of these components might result in accidents to children.
This document does not apply to:
a)   child care articles;
b)   shoes, boots and similar footwear;
c)   toys (see NOTE 2);
d)   other articles sold with clothing.
NOTE 1   The above items are covered by other CEN Technical Committees and as such are out of the scope of this document.
NOTE 2   Disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17394-1:2021(Main)
Textiles and textile products - Part 1: Safety of children's clothing - Security of attachment of attached components to infants' clothing - Specification
SIST-TS CEN/TS 17394-1:2024

This document provides requirements for security of attachment for clothing components that are considered as small parts such as buttons, press fasteners, rivets, sequins, diamantes (or pieces of these components) which fit entirely within the small parts cylinder without compression, for infants' clothing.
Release of these small components from clothing is considered to present hazards of choking, swallowing, ingestion, inhaling (aspiration) or insertion into eyes, nose or ears for infants. This age group is particularly vulnerable as they often do not have the language skills to convey the accident to their carers.
In older children and adults, incidents of accidental insertion or swallowing etc are significantly reduced, predominantly due to the ability of the child to remove the component themselves or to explain and obtain medical help.
This document does not apply to:
a)   child care articles;
b)   shoes, boots and similar footwear;
c)   toys (see NOTE 2);
d)   other articles sold with clothing.
NOTE 1   The above items are covered by other CEN Technical Committees and as such are out of the scope of this document.
NOTE 2   Disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.

  • Technical specification
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8559-1:2020(Main)
Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
SIST EN ISO 8559-1:2021

ISO 8559-1:2017 provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases. The list of measurements specified in this document is intended to serve as a guide for practitioners in the field of clothing who are required to apply their knowledge to select population market segments and to create size and shape profiles for the development of all garment types and their equivalent fit mannequins. The list provides a guide for how to take anthropometric measurements, as well as give information to clothing product development teams and fit mannequin manufacturers on the principles of measurement and their underlying anatomical and anthropometrical bases.
Annex A describes the use of the pictogram (standardized and modified) based on the selection of most usual body dimensions used for clothing size designation.
ISO 8559-1:2017 is intended to be used in conjunction with national, regional or international regulations or agreements to ensure harmony in defining population groups and to allow comparison of anthropometric data sets.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8559-2:2020(Main)
Size designation of clothes - Part 2: Primary and secondary dimension indicators (ISO 8559-2:2017)
SIST EN ISO 8559-2:2021

ISO 8559-2:2017 specifies primary and secondary dimensions for specified types of garments to be used in combination with ISO 8559‑1 (anthropometric definitions for body measurement).
The primary aim of this document is to establish a size designation system that can be used by manufacturers and retailers to indicate to consumers (in a simple, direct and meaningful manner) the body dimensions of the person that the garment is intended to fit. Provided that the size of the person's body (as indicated by the specified dimensions) has been determined in accordance with ISO 8559‑1, this designation system will facilitate the choice of garments that fit. This information can be indicated by labelling, etc.
The size designation system is based on body measurements, not garment measurements. The choice of garment measurements is normally determined by the designer and the manufacturers who make appropriate allowances to accommodate the type and position of wear, style, cut and fashion elements of the garment.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17394-2:2020(Main)
Textiles and textile products - Part 2: Safety of children's clothing - Security of attachment of buttons - Test method
SIST EN 17394-2:2021

This document defines a test method for security of attachment of functional and decorative buttons to clothing including garments such as gloves, hats, scarves, hosiery, ties, and textile belts.
This document does not apply to:
a)   child care articles;
b)   shoes, boots and similar footwear;
c)   toys (see NOTE 2);
d)   other articles sold with clothing.
NOTE 1   The above items are covered by other CEN Technical Committees and as such are out of scope of this document.
NOTE 2   Disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.
The scope of this document is limited to sewn-on buttons, toggle buttons and tack buttons.
Assessment of other garment components are considered in:
-   CEN/TS 17394-3, or
-   CEN/TS 17394-4.
Performance requirements are provided in CEN/TS 17394-1.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17376:2019(Main)
Textiles - Safety of children's clothing - Guidance on the use of EN 14682:2014 Cords and drawstrings on children's clothing - Specifications
SIST-TP CEN/TR 17376:2019

This Technical Report has been written to help all users of EN 14682:2014 with the understanding of garment styling and the harmonized standard.
The document is in 'Question and Answer' format. All the garments mentioned are examples of frequently asked questions raised by the clothing industry or market surveillance authorities. The responses have been reviewed and agreed upon by CEN/TC 248/WG 20.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15487:2018(Main)
Textiles - Method for assessing appearance of apparel and other textile end products after domestic washing and drying (ISO 15487:2018)
SIST EN ISO 15487:2018

This document specifies a method of test for evaluating the appearance of apparel and other textile end products after one or several domestic washing and drying treatments. The appearance evaluated includes colour change, pilling, fuzzing, matting appearance of fabrics, smoothness appearance of flat fabric and seams, and the retention of pressed-in creases in garments and other textile products, damage of components ? buttons, press fasteners, slide fasteners, etc.
This document is applicable to any washable textile end product of any fabric construction. Techniques for seaming and creasing are not included since the purpose is to evaluate textile end products as they are supplied from the manufacturer or as ready-to-use. Techniques for seaming and creasing are controlled by fabric properties.
This method has been developed primarily for use with domestic washing machines of Type B as defined in ISO 6330, but it can be used with any type of machine defined in ISO 6330.
It is recognized that prints and patterns can mask the wrinkled appearance present in textile end products. The rating process is, however, based on the visual appearance of specimens including such effects.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16792:2014(Main)
Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety
SIST-TP CEN/TR 16792:2015

This Technical Report gives recommendations for the design and manufacture of safe children’s clothing in relation to mechanical hazards.
This Technical Report also gives recommendations on safety aspects of the packaging and display of children’s clothing, including guidance for retailers.
This Technical Report is applicable to clothing including bonnets, hats, gloves, scarves, socks and other clothing accessories intended for all children up to 14 years of age. It is suggested that dressing up clothes meet the recommendations of this Technical Report in addition to the requirements of EN 71.
This Technical Report is intended for use at all stages of the clothing supply chain, including use by designers, specifiers and manufacturers of children’s clothing. It is also intended to be used by importers, distributors and retailers to assist them in the selection of clothing that does not present a hazard.
This Technical Report is not applicable to:
a)   child care articles, such as bibs, nappies and soother holders;
b)   footwear, such as boots, shoes and slippers; or
c)   toys and other items sold with the clothing;
as these articles are not within the scope of CEN/TC 248.
This Technical Report does not include recommendations on any clothing features that might be necessary to cater for children with special needs.

  • Technical report
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day