EN 10113-2:1993
(Main)Hot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for normalized/normalized rolled steels
Hot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for normalized/normalized rolled steels
Part 2 of this European Standard, in addition to part 1, specifies requirements for flat and long products of hot-rolled weldable fine grain structural steel in the normalized delivery condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties), in thickness ¿ 150 mm for grades S275, S355 and S420 and in thickness ¿ 100 mm for grade S460.
Warmgewalzte Erzeugnisse aus schweißgeeigneten Feinkornbaustählen - Teil 2: Lieferbedingungen für normalgeglühte/normaliserend gewalzte Stähle
Der Teil 2 dieser Europäischen Norm enthält in Verbindung mit Teil 1 die Anforderungen an Flach- und Langerzeugnisse aus warmgewalzten schweissgeeigneten Feinkornbaustählen der Sorten und Gütegruppen nach den Tabellen 1 und 2 (chemische Zusammensetzung) sowie nach den Tabellen 3, 4 und 5 (mechanische Eigenschaften) im normalgeglühten Zustand für Dicken <= 150 mm bei den Stahlsorten S275, S355, S420 und für Dicken <= 100 mm der Stahlsorte S460.
Produits laminés à chaud en aciers de construction soudable à grains fins - Partie 2: Conditions de livraison des aciers à l'état normalisé/laminage normalisé
La présente partie 2 de la norme européenne vient s'ajouter à la partie 1 et spécifie les caractéristiques des produits plats et longs en aciers de construction soudables, à grains fins à l'état normalisé à la livraison et dans les nuances et qualités données au tableau 1 (pour la composition chimique), et aux tableaux 3, 4 et 5 (pour les caractéristiques mécaniques), pour les épaisseurs <= 150 mm pour les nuances S275, S355, S420 et pour les épaisseurs <= 100 mm pour la nuance S460.
Vroče valjani izdelki iz varivih drobnozrnatih konstrukcijskih jekel - 2. del: Dobavni pogoji za normalizirana/normalizacijsko valjana jekla
General Information
- Status
- Withdrawn
- Publication Date
- 08-Mar-1993
- Withdrawal Date
- 09-Nov-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Nov-2004
- Completion Date
- 10-Nov-2004
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10113-2:1993 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for normalized/normalized rolled steels". This standard covers: Part 2 of this European Standard, in addition to part 1, specifies requirements for flat and long products of hot-rolled weldable fine grain structural steel in the normalized delivery condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties), in thickness ¿ 150 mm for grades S275, S355 and S420 and in thickness ¿ 100 mm for grade S460.
Part 2 of this European Standard, in addition to part 1, specifies requirements for flat and long products of hot-rolled weldable fine grain structural steel in the normalized delivery condition in the grades and qualities given in table 1 (chemical composition) and tables 3, 4 and 5 (mechanical properties), in thickness ¿ 150 mm for grades S275, S355 and S420 and in thickness ¿ 100 mm for grade S460.
EN 10113-2:1993 is classified under the following ICS (International Classification for Standards) categories: 77.140.10 - Heat-treatable steels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10113-2:1993 has the following relationships with other standards: It is inter standard links to EN 10025-1:2004, EN 10025-3:2004, CR 10313:2000, EN 14015:2004; is excused to EN 10113-1:1993. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10113-2:1993 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/86/1. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10113-2:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgewalzte Erzeugnisse aus schweißgeeigneten Feinkornbaustählen - Teil 2: Lieferbedingungen für normalgeglühte/normaliserend gewalzte StähleProduits laminés a chaud en aciers de construction soudable a grains fins - Partie 2: Conditions de livraison des aciers a l'état normalisé/laminage normaliséHot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for normalized/normalized rolled
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...