EN 1982:1998
(Main)Copper and copper alloys - Ingots and castings
Copper and copper alloys - Ingots and castings
This European Standard specifies the composition, mechanical properties and other relevant characteristics of the materials. The sampling procedures and test methods for the verification of conformity to the requirements of this standard are also specified. This standard is applicable to: a) copper alloy ingots intended to be remelted for the production of castings; and b) copper and copper alloy castings which are intended for use without subsequent working other than machining. The castings may be manufactured by the sand, permanent mould, centrifugal, continuous or pressure die casting process. Recommended practice for the ordering and supply of castings is included in annex A. Optional supplementary inspection procedures for ingots and castings are included in annex B.
Kupfer und Kupferlegierungen - Blockmetalle und Gußstücke
Diese Europäische Norm legt die Zusammensetzung, mechanischen Eigenschaften und andere wichtige Werkstoffeigenschaften fest. Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Norm sind ebenfalls festgelegt. Diese Norm ist anwendbar für: a) Blockmetalle aus Kupferlegierungen, die zur Herstellung von Gußstücken umzuschmelzen sind; und b) Gußstücke aus Kupfer und Kupferlegierungen, die für den Gebrauch ohne nachfolgende Bearbeitung, ausgenommen der mechanischen Bearbeitung, bestimmt sind.
Cuivre et alliages de cuivre - Lingots et pièces moulées
La présente norme européenne spécifie la composition, les caractéristiques mécaniques et autres caractéristiques utiles des matériaux. Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux prescriptions de la présente norme sont également spécifiées. La présente norme s'applique aux: a) lingots d'alliage de cuivre destinés à être refondus pour la production de pièces moulées; et b) pièces moulées en cuivre et alliage de cuivre destinées à être utilisées sans transformation ultérieure autre que l'usinage.
Baker in bakrove zlitine - Bloki za pretaljevanje in ulitki
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 22-Apr-2008
- Technical Committee
- CEN/TC 133 - Copper and copper alloys
- Drafting Committee
- CEN/TC 133/WG 7 - Ingots and castings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 23-Apr-2008
- Completion Date
- 23-Apr-2008
- Directive
- 89/106/EEC - Construction products
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 1982:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Copper and copper alloys - Ingots and castings". This standard covers: This European Standard specifies the composition, mechanical properties and other relevant characteristics of the materials. The sampling procedures and test methods for the verification of conformity to the requirements of this standard are also specified. This standard is applicable to: a) copper alloy ingots intended to be remelted for the production of castings; and b) copper and copper alloy castings which are intended for use without subsequent working other than machining. The castings may be manufactured by the sand, permanent mould, centrifugal, continuous or pressure die casting process. Recommended practice for the ordering and supply of castings is included in annex A. Optional supplementary inspection procedures for ingots and castings are included in annex B.
This European Standard specifies the composition, mechanical properties and other relevant characteristics of the materials. The sampling procedures and test methods for the verification of conformity to the requirements of this standard are also specified. This standard is applicable to: a) copper alloy ingots intended to be remelted for the production of castings; and b) copper and copper alloy castings which are intended for use without subsequent working other than machining. The castings may be manufactured by the sand, permanent mould, centrifugal, continuous or pressure die casting process. Recommended practice for the ordering and supply of castings is included in annex A. Optional supplementary inspection procedures for ingots and castings are included in annex B.
EN 1982:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.30 - Copper products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1982:1998 has the following relationships with other standards: It is inter standard links to EN 1982:2008, CEN/TS 16650:2014, EN 12516-4:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1982:1998 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1982:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-1999
Baker in bakrove zlitine - Bloki za pretaljevanje in ulitki
Copper and copper alloys - Ingots and castings
Kupfer und Kupferlegierungen - Blockmetalle und Gußstücke
Cuivre et alliages de cuivre - Lingots et pieces moulées
Ta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...