EN 4057-407:2005
(Main)Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings
Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings
This standard specifies the procedure for verifying tensile loads applied on cable ties by application tools.
It shall be used together with EN 4057 100.
Luft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 407: Werkzeugverifikation
Diese Norm legt das Verfahren zur Verifizierung von Zugkräften fest, die durch Bindewerkzeuge auf Befesti¬gungsbänder aufgebracht werden.
Sie ist mit EN 4507 100 zu verwenden.
Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 407 : Vérification du réglage des outils de mise en oeuvre
Aeronavtika – Kabelske spojke za vezalno pasovje – Preskusne metode – 407. del: Overjanje nastavitev orodja
General Information
- Status
- Published
- Publication Date
- 15-Nov-2005
- Withdrawal Date
- 30-May-2006
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 2 - Electrical
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 16-Nov-2005
- Completion Date
- 16-Nov-2005
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 4056-001:2006 - Aerospace series - Cable ties for harnesses - Part 001: Technical specification - Effective Date
- 28-Jan-2026
- Referred By
EN 4056-001:2015 - Aerospace series - Cable ties for harnesses - Part 001: Technical specification - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN 4057-100:2006 - Aerospace series - Cable ties for harnesses - Test methods - Part 100: General - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN 4057-407:2005 is a CEN/AECMA aerospace test-method standard titled Aerospace series - Cable ties for harnesses - Part 407: Verification of application tool settings. The standard specifies a procedure to verify the tensile loads applied to cable ties by application tools. It is intended to be used together with EN 4057-100 (general test methods) and references tool MS 90387 for hand adjustable application tools.
Key topics
- Scope: Verification of tensile load applied by cable-tie application tools used on harnesses.
- Apparatus: A verification rig comprising a supporting structure, a tensometer (range 50 N to 600 N) with direct readout and maximum-force recorder, and an application tool guide. The rig configuration is defined (hook for horizontal strap, slot for cable tie, tool guide).
- Procedure:
- Adjust application tool for the intended cable-tie size and align the tensometer with the strap guide.
- Insert cable tie horizontally; attach the tie head to the tensometer.
- Zero the scale and position the recording needle above scale needle.
- With the tool stationary, apply steady handle pressure until the strap is cut; record the tensile force.
- Adjust the tool so the strap is cut at the maximum application force recommended in the relevant cable-tie product standard, with a tolerance of ±5%.
- Verify repeatability by testing five identical cable ties and repeat the procedure for every cable-tie size/type the tool will be used for.
- Requirements: Measured values shall conform to the values specified in the applicable cable-tie product standards.
Applications
EN 4057-407 is practical for ensuring consistent, reliable installation forces for cable ties in aerospace harness assemblies. Typical uses include:
- Quality assurance and incoming inspection for cable-tie application tools.
- Periodic calibration and verification of hand and powered application tools.
- Manufacturing process control in harness assembly lines to meet aerospace safety and traceability requirements.
- Procurement and approval testing when selecting application tools for use with certified cable-tie products.
Who should use this standard
- Aerospace harness manufacturers and assemblers
- Tool calibration and maintenance technicians
- Quality managers and test laboratories in aviation/aerospace supply chains
- Procurement specialists specifying compliant cable-tie tooling
Related standards
- EN 4057-100 - Aerospace series: Cable ties for harnesses - Test methods - Part 100: General
- MS 90387 - Tool, hand, adjustable for plastic and metal tiedown straps
Keywords: EN 4057-407, cable ties, application tool settings, verification, tensile load, tensometer, aerospace cable-tie test methods.
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 4057-407:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings". This standard covers: This standard specifies the procedure for verifying tensile loads applied on cable ties by application tools. It shall be used together with EN 4057 100.
This standard specifies the procedure for verifying tensile loads applied on cable ties by application tools. It shall be used together with EN 4057 100.
EN 4057-407:2005 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 4057-407:2005 has the following relationships with other standards: It is inter standard links to EN 4056-005:2023, EN 4056-003:2019, EN 4056-004:2014, EN 4056-001:2006, EN 4056-001:2015, EN 4056-003:2016, EN 4057-100:2006, EN ISO 15748-1:2002, EN 12827:1999, EN 4056-006:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 4057-407:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settingsAeronavtika – Kabelske spojke za vezalno pasovje – Preskusne metode – 407. del: Overjanje nastavitev orodjaSérie aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 407 : Vérification du réglage des outils de mise en oeuvreLuft- und Raumfahrt - Befestigungsbänder für Leitungsbündel - Prüfverfahren - Teil 407: WerkzeugverifikationTa slovenski standard je istoveten z:EN 4057-407:2005SIST EN 4057-407:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 4057-407:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4057-407November 2005ICS 49.060 English VersionAerospace series - Cable ties for harnesses - Test methods -Part 407: Verification of application tool settingsSérie aérospatiale - Frettes de câblage pour harnais -Méthodes d'essais - Partie 407 : Vérification du réglage desoutils de mise en oeuvreLuft- und Raumfahrt - Befestigungsbänder fürLeitungsbündel - Prüfverfahren - Teil 407:WerkzeugverifikationThis European Standard was approved by CEN on 28 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4057-407:2005: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...