EN ISO 8662-12:1997
(Main)Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997)
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997)
This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held pneumatic saws with reciprocating, rotating or oscillating action and files with reciprocating action. It is a type-test procedure for establishing the magnitude of vibrations at the power tool when operating under a specified load. NOTE: Rotating files, termed die grinderd, are covered by ISO 8662-13. It is intended that the result be used to compare different power tools or different models of the same type of power tool. With the operation specifies for the power tool, the values obtained will give an indication of those found in real work situations.
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am Handgriff - Teil 12: Sägen und Feilen mit Hubbewegung und Sägen mit Schwing- oder Drehbewegung (ISO 8662-12:1997)
Dieser Teil von ISO 8662 legt ein Laborverfahren zur Messung der Schwingungen an den Handgriffen von handgehaltenen pneumatischen Sägen mit Hub-, Scwhing- oder Drehbewegung und Feilen mit Hubbewegung fest. Es handelt sich um ein Meßverfahren zur Ermittlung von Schweingungskennwerten an den Handgriffen einer motorbetriebenen Maschine, die unter vorgegebener Belastung arbeitet. Feilen mit reiner Drehbewegung heißen Geradschleifer mit Spannzange und werden in ISO 8662-13 behandelt.
Machines à moteur portatives - Mesurage des vibrations au niveau des poignées - Partie 12: Scies et limes alternatives et scies oscillantes ou circulaires (ISO 8662-12:1997)
Gnana ročna orodja - Meritve vibracij na ročajih - 12. del: Žage in pile s povratnim gibanjem in žage z nihajnim ali krožnim gibanjem (ISO 8662-12:1997)
General Information
- Status
- Withdrawn
- Publication Date
- 31-Aug-1997
- Withdrawal Date
- 14-Dec-2009
- Technical Committee
- CEN/TC 231 - Mechanical vibration and shock
- Drafting Committee
- CEN/TC 231/WG 2 - Hand-arm vibration
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Dec-2009
- Completion Date
- 15-Dec-2009
- Directive
- 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 19-Dec-2009
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF International
Global independent organization facilitating standards development and certification.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
Sponsored listings
Frequently Asked Questions
EN ISO 8662-12:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997)". This standard covers: This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held pneumatic saws with reciprocating, rotating or oscillating action and files with reciprocating action. It is a type-test procedure for establishing the magnitude of vibrations at the power tool when operating under a specified load. NOTE: Rotating files, termed die grinderd, are covered by ISO 8662-13. It is intended that the result be used to compare different power tools or different models of the same type of power tool. With the operation specifies for the power tool, the values obtained will give an indication of those found in real work situations.
This part of ISO 8662 specifies a laboratory method for measuring the vibrations at the handles of hand-held pneumatic saws with reciprocating, rotating or oscillating action and files with reciprocating action. It is a type-test procedure for establishing the magnitude of vibrations at the power tool when operating under a specified load. NOTE: Rotating files, termed die grinderd, are covered by ISO 8662-13. It is intended that the result be used to compare different power tools or different models of the same type of power tool. With the operation specifies for the power tool, the values obtained will give an indication of those found in real work situations.
EN ISO 8662-12:1997 is classified under the following ICS (International Classification for Standards) categories: 13.160 - Vibration and shock with respect to human beings; 25.140.01 - Hand-held tools in general. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8662-12:1997 has the following relationships with other standards: It is inter standard links to EN ISO 28927-8:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8662-12:1997 is associated with the following European legislation: EU Directives/Regulations: 89/392/EEC, 98/37/EC; Standardization Mandates: M/079. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 8662-12:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2000
*QDQDURþQDRURGMD0HULWYHYLEUDFLMQDURþDMLKGHO äDJHLQSLOHVSRYUDWQLP
JLEDQMHPLQåDJH]QLKDMQLPDOLNURåQLPJLEDQMHP ,62
Hand-held portable power tools - Measurement of vibrations at the handle - Part 12:
Saws and files with reciprocating action and saws with oscillating or rotating action (ISO
8662-12:1997)
Handgehaltene motorbetriebene Maschinen - Messung mechanischer Schwingungen am
Handgriff - Teil 12: Sägen und Feilen mit Hubbewegung und Sägen mit Schwing- oder
Drehbewegung (ISO 8662-12:1997)
Machines a moteur portatives - Mesurage des vibrations au niveau des poignées - Partie
12: Scies et limes alternatives et scies oscillantes ou circulaires (ISO 8662-12:1997)
Ta slovenski standard je istoveten z: EN ISO 8662-12:1997
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...