EN ISO 19085-12:2021/A11:2023

SLOVENSKI STANDARD
01-maj-2023
Lesnoobdelovalni stroji - Varnost - 12. del: Stroji za izdelovanje čepov in
utorov/profilni stroji- Dopolnilo A11 (ISO 19085-12:2021)
Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-
12:2021)
Holzbearbeitungsmaschinen - Sicherheit - Teil 12: Zapfenschneid- und
Schlitzmaschinen/Profiliermaschinen (ISO 19085-12:2021)
Machines à bois - Sécurité - Partie 12: Machines à tenonner/profiler (ISO 19085-
12:2021)
Ta slovenski standard je istoveten z: EN ISO 19085-12:2021/A11:2023
ICS:
13.110 Varnost strojev Safety of machinery
79.120.10 Lesnoobdelovalni stroji Woodworking machines
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19085-
EUROPEAN STANDARD
12:2021/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS 13.110; 79.120.10
English Version
Woodworking machines - Safety - Part 12:
Tenoning/profiling machines (ISO 19085-12:2021)
Machines à bois - Sécurité - Partie 12: Machines à Holzbearbeitungsmaschinen - Sicherheit - Teil 12:
tenonner/profiler (ISO 19085-12:2021) Zapfenschneid- und
Schlitzmaschinen/Profiliermaschinen (ISO 19085-
12:2021)
This amendment A11 modifies the European Standard EN ISO 19085-12:2021; it was approved by CEN on 21 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-12:2021/A11:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

European foreword
This document (EN ISO 19085-12:2021/A11:2023) has been prepared by Technical Committee
CEN/TC 142 “Woodworking machines - Safety” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 19085-12:2021 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2023,
and conflicting national standards shall be withdrawn at the latest by September 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annex ZA, which is an integral part of this document.
According to the C
...