EN ISO 4254-10:2009
(Main)Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
ISO 4254-10:2009, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary tedders, rotary rakes and rotary tedder–rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer.
ISO 4254-10:2009 is not applicable to: machines with ground‑driven tines or ground‑wheel–driven tines (e.g. sunflower rakes); parallel bar rakes; chain or endless belt type rakes; pedestrian‑controlled tedders and rakes; machines equipped with a pick-up device.
ISO 4254-10:2009, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to rotary tedders, rotary rakes and rotary tedder–rakes when they are used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from: the environment, other than noise; electromagnetic compatibility; vibration; overturning in regard to the protection of the operator at the driving station of a self-propelled machine; moving parts for power transmission except strength requirements for guards and barriers; safety and reliability of control systems.
Landmaschinen - Sicherheit - Teil 10: Kreiselzetter und Schwader (ISO 4254-10:2009)
Dieser Teil von ISO 4254, der zusammen mit ISO 4254-1 anzuwenden ist, enthält sicherheitstechnische
Anforderungen und deren Überprüfung für Gestaltung und Konstruktion von Kreiselzettern, Kreiselschwadern,
Kreiselrechwendern einschließlich Trommelzettschwadern, mit einem oder mehreren angetriebenen Kreiseln,
angebaut, aufgesattelt, gezogen oder selbstfahrend. Die Benutzung erfolgt durch nur eine Person (Bedienungsperson).
Zusätzlich legt sie fest, welche Informationen über sicheres Arbeiten einschließlich Restrisiken
vom Hersteller zur Verfügung zu stellen sind.
Dieser Teil von ISO 4254 gilt nicht für:
a) Maschinen mit bodenangetriebenen Zinken oder bodenradgetriebenen Zinken (z. B. Radrechwender);
b) Schubrechwender;
c) Ketten- oder Bandrechwender;
d) handgeführte Zetter und Schwader;
e) Maschinen mit einer Pick-up.
Wenn Anforderungen dieses Teils von ISO 4254 von den Anforderungen in ISO 4254-1 abweichen, haben die
Anforderungen dieses Teils von ISO 4254 Vorrang gegenüber den Anforderungen von ISO 4254-1 für
Maschinen, die nach den Bestimmungen dieses Teils von ISO 4254 konstruiert und gebaut worden sind.
Dieser Teil von ISO 4254 behandelt zusammen mit ISO 4254-1 alle signifikanten Gefährdungen, Gefährdungssituationen
und Gefährdungsereignisse von Kreiselzettern, Kreiselschwadern und Kreiselrechwendern,
wenn sie bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen der vernünftigerweise
vorhersehbaren Fehlanwendung verwendet werden (siehe Abschnitt 4), ausgenommen Gefährdungen
durch:
andere Umweltgefährdungen als Geräusche;
elektromagnetische Verträglichkeit;
Schwingungen;
Umstürzen hinsichtlich des Schutzes der Bedienungsperson am Fahrerplatz einer selbstfahrenden
Maschine;
bewegte Teile der Kraftübertragung, ausgenommen Festigkeitsanforderungen an Schutzeinrichtungen
und Abweisbügeln;
Matériel agricole - Sécurité - Partie 10: Faneuses et andaineuses rotatives (ISO 4254-10:2009)
L'ISO 4254-10:2009, à utiliser conjointement avec l'ISO 4254-1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction des faneuses rotatives, andaineuses rotatives et faneuses-andaineuses rotatives, y compris les andaineuses rotatives à tambour, à un ou plusieurs rotors animés, portées, semi-portées, traînées ou automotrices, utilisées par une seule personne (l'opérateur). En outre, elle spécifie le type d'informations que le fabricant doit fournir sur les pratiques d'utilisation sûre (incluant les risques résiduels).
L'ISO 4254-10:2009 ne s'applique pas aux machines avec dents entraînées par le sol durant l'avancement ou avec dents entraînées par une roue roulant sur le sol (par exemple les râteaux-soleil); aux andaineuses à râteaux parallèles; aux andaineuses à chaînes ou à courroies; aux faneuses et andaineuses à conducteur à pied; aux machines dotées d'un dispositif de ramassage.
L'ISO 4254-10:2009, prise avec l'ISO 4254-1, traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs relatifs aux faneuses rotatives, andaineuses rotatives et faneuses-andaineuses rotatives, lorsqu'elles sont utilisées normalement et dans les conditions de mauvais usage raisonnablement prévisible par le fabricant, à l'exception des phénomènes dangereux provenant de l'environnement, autres que le bruit; de la compatibilité électromagnétique; des vibrations; du retournement, eu égard à la protection de l'opérateur au poste de conduite des machines automotrices; des organes mobiles de transmission de puissance, à l'exception des exigences relatives à la résistance des protecteurs et des barres d'éloignement; de la sécurité et de la fiabilité des systèmes de commande.
Kmetijski stroji - Varnost - 10. del: Vrtavkasti obračalniki in zgrabljalniki (ISO 4254-10:2009)
Ta del ISO 4254, ki se uporablja skupaj z ISO 4254-1, opredeljuje varnostne zahteve in njihovo preverjanje za načrtovanje in izgradnjo vrtavkastih obračalnikov, vrtavkastih zgrabljalnikov in vrtavkastih obračalnikov -zgrabljalnikov, vključno z vrtavkastimi bobnastimi zgrabljalniki, ki jih uporablja zgolj ena oseba (upravljavec), in ki imajo enega ali več gnanih rotorjev, pritrjenih, pol pritrjenih, vlečenih ali samognanih. Poleg tega določa vrste podatkov glede varnih delovnih postopkov (vključno s preostalimi tveganji), ki jih mora zagotoviti proizvajalec. Ta del ISO 4254 se ne uporablja za: a) stroje s po tleh vlečenimi zobci ali po tleh vlečenimi kolesi z zobci (npr. zgrabljalniki za sončnice); b) zgrabljalnike z vzporednimi drogovi; c) zgrabljalniki verižnega tipa ali tipa tekočega jermena; d) obračalniki in zgrabljalniki, ki jih nadzira pešec; e) stroji, opremljeni z napravo za dvigovanje. Kadar se zahteve tega dela ISO 4254 razlikujejo od zahtev, navedenih v ISO 4254-1, imajo zahteve tega dela ISO 4254 prednost pred zahtevami ISO 4254-1 za stroje, ki so bili načrtovani in zgrajeni v skladu z določbami tega dela ISO 4254. Ta del ISO 4254, skupaj z ISO 4254-1, obravnava vse velike nevarnosti, nevarna stanja in dogodke v zvezi z vrtavkastimi obračalniki, vrtavkastimi zgrabljalniki in vrtavkastimi obračalniki - zgrabljalniki pri uporabi v skladu z namembnostjo in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4), razen nevarnosti, ki izhajajo iz: - okolja, ki ni hrup; - elektromagnetne združljivosti; - vibracije; - prevračanja glede zaščite upravljavca na voznikovem mestu samognanega stroja; gibljive dele za prenos električne energije, razen zahtev glede moči za ščitnike in pregrade; varnost in zanesljivost nadzornega sistema.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2010
.PHWLMVNLVWURML9DUQRVWGHO 9UWDYNDVWLREUDþDOQLNLLQ]JUDEOMDOQLNL ,62
Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)
Landmaschinen - Sicherheit - Teil 10: Kreiselzetter und Schwader (ISO 4254-10:2009)
Matériel agricole - Sécurité - Partie 10: Faneuses et andaineuses rotatives (ISO 4254-
10:2009)
Ta slovenski standard je istoveten z: EN ISO 4254-10:2009
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 4254-10
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 65.060.50
English Version
Agricultural machinery - Safety - Part 10: Rotary tedders and
rakes (ISO 4254-10:2009)
Matériel agricole - Sécurité - Partie 10: Faneuses et Landmaschinen - Sicherheit - Teil 10: Kreiselzetter und
andaineuses rotatives (ISO 4254-10:2009) Schwader (ISO 4254-10:2009)
This European Standard was approved by CEN on 14 December 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-10:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
Foreword
This document (EN ISO 4254-10:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors
and machinery for agriculture and forestry", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at
the latest by June 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this
document.
Regarding the protection of the moving parts for power transmission, see EN 15811:2009 "Agricultural
machinery - Guards for moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007
modified)".
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach “Machinery” Directive 98/37/EC, amended by Directive 98/79/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive, except Essential Requirements 1.3.8.A, 1.5.9, 1.5.11 (EMC
immunity), 3.4.3 (only for self-propelled machines), 3.4.7 (PTO draft shaft) and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
Annex ZB
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive, except Essential Requirements 1.2.1, 1.3.8.1, 1.4.2.1 (2nd
paragraph), 1.5.9, 1.5.11 (EMC immunity), 1.7.4.2 u) (4th paragraph, 2nd sentence; only for self-propelled
machines), 3.4.3 (only for self-propelled machines), 3.4.7 (PTO draft shaft) and 3.6.3.1, and associated EFTA
regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 4254-10
First edition
2009-12-15
Agricultural machinery — Safety —
Part 10:
Rotary tedders and rakes
Matériel agricole — Sécurité —
Partie 10: Faneuses et andaineuses rotatives
Reference number
ISO 4254-10:2009(E)
©
ISO 2009
ISO 4254-10:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 4254-10:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.2
3 Terms and definitions .2
4 List of significant hazards .3
5 Safety requirements and/or protective measures.10
5.1 General .10
5.2 Noise.10
5.3 Protection against inadvertent contact with tines and tine arms .11
5.4 Controls.17
5.5 Machine in storage position.19
5.6 Swivelling and movable components for transport.24
5.7 Drawbar hitch and/or carrier frame .25
6 Verification of the safety requirements and/or protective measures .25
7 Information for use.26
7.1 Instruction handbook.26
7.2 Marking.27
7.3 Safety and instructional signs .27
Annex A (informative) Tedders and swath rakes — Examples .28
Annex B (normative) Strength test .31
Annex C (informative) Stability of tractor-rotary tedder and rake combination .32
Bibliography.34
ISO 4254-10:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4254-10 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 144, in collaboration with ISO Technical Committee TC 23, Tractors and machinery for agriculture
and forestry, Subcommittee SC 7, Equipment for harvesting and conserva
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.