iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 622-2:1997

(Main)

Fibreboards - Specifications - Part 2: Requirements for hardboards

Fibreboards - Specifications - Part 2: Requirements for hardboards

This European Standard specifies the requirements for hardboards as defined in EN 316.  The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculation.

Faserplatten - Anforderungen - Teil 2: Anforderungen an harte Platten

Diese Europäische Norm legt Anforderungen an harte Platten nach EN 316 fest. Die in dieser Norm angegebenen Werte beziehen sich auf Produkteigenschaften, aber sie sind keine charakteristischen Werte für konstruktive Berechnungen.

Panneaux de fibres - Exigences - Partie 2: Exigences pour panneaux durs

La présente Norme Européenne prescrit les exigences pour les panneaux durs selon EN 316.  Les valeurs données dans la présente norme concernent les caractéristiques du produit mais ne sont pas les valeurs caractéristiques à utiliser dans les calculs de conception.

Vlaknene plošče - Specifikacije - 2. del: Zahteve za trde plošče

General Information

Status
Withdrawn
Publication Date
17-Jun-1997
Withdrawal Date
27-Apr-2004
ICS
79.060.20 - Fibre and particle boards
Technical Committee
CEN/TC 112 - Woodbased panels
Drafting Committee
CEN/TC 112/WG 3 - Fibreboards
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Apr-2004
Completion Date
28-Apr-2004
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
Ref Project
SIST EN 622-2:1998 - Fibreboards - Specifications - Part 2: Requirements for hardboards

Relations

Replaced By
EN 622-2:2004 - Fibreboards - Specifications - Part 2: Requirements for hardboards
Effective Date
22-Dec-2008

Buy Standard

EN 622-2:1998EN 622-2:1998
PreviousNext
Standard
EN 622-2:1998
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 622-2:1998
01-marec-1998
9ODNQHQHSORãþH6SHFLILNDFLMHGHO=DKWHYH]DWUGHSORãþH
Fibreboards - Specifications - Part 2: Requirements for hardboards
Faserplatten - Anforderungen - Teil 2: Anforderungen an harte Platten
Panneaux de fibres - Exigences - Partie 2: Exigences pour panneaux durs
Ta slovenski standard je istoveten z: EN 622-2:1997
ICS:
79.060.20 9ODNQHQHLQLYHUQHSORãþH Fibre and particle boards
SIST EN 622-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 622-2:1998

---------------------- Page: 2 ----------------------

SIST EN 622-2:1998

---------------------- Page: 3 ----------------------

SIST EN 622-2:1998

---------------------- Page: 4 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14322:2021(Main)
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
SIST EN 14322:2022

This document specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.
This document is not applicable to boards laminated with so called priming foils or finish foils and laminates according to EN 438-1 and EN 438-2.
This document is not applicable to laminate floor coverings.
Melamine faced wood-based boards in accordance with this document can be referred to as MFB.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14323:2021(Main)
Wood-based panels - Melamine faced boards for interior uses - Test methods
SIST EN 14323:2022

This document specifies test methods for the determination of characteristics of melamine faced boards (MFB) in accordance with EN 14322.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 622-4:2019(Main)
Fibreboards - Specifications - Part 4: Requirements for softboards
SIST EN 622-4:2019

This document specifies the requirements for softboards as defined in EN 316, with a density from 230 kg/m³ to 400 kg/m³.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16368:2014(Main)
Lightweight Particleboards - Specifications
SIST-TS CEN/TS 16368:2014

This European Technical Specification specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3.
This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards.
This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels.
NOTE   Typical applications for lightweight boards are in furniture and non-structural applications e.g. in doors, packaging.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 320:2011(Main)
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
SIST EN 320:2011

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 312:2010(Main)
Particleboards - Specifications
SIST EN 312:2011

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309.
NOTE 1   This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards.
The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations.
NOTE 2   Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156.
Additional information on supplementary properties for certain applications is also given.
NOTE 3   Particleboards in accordance with this standard may be referred to as P1 to P7-boards.
Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards).
This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 622-5:2009(Main)
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
SIST EN 622-5:2010

This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 316:2009(Main)
Wood fibre boards - Definition, classification and symbols
SIST EN 316:2009

This European Standard gives the definition, classification and symbols for wood fibreboards.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14279:2004+A1:2009(Main + Amendment)
Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
SIST EN 14279:2005+A1:2009

This document gives definitions, a classification and specifies the requirements for Laminated Veneer Lumber (LVL) for general purposes or for use in construction in dry, humid or exterior conditions.
NOTE   This standard will be called up in EN 13986 for construction applications.
Annex A "Evaluation of the bonding quality of laminated veneer lumber" is normative
Information on supplementary properties is given in Annex B.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15197:2007(Main)
Wood-based panels - Flaxboards - Specifications
SIST EN 15197:2007

This European Standard specifies the requirements for flaxboards for general purposes, non-load bearing applications and interior fitments in dry conditions and for flaxboards for non-load bearing applications for use in humid conditions.
NOTE 1   Dry conditions are defined in terms of service class 1 of EN 1995-1-1 which is characterized by the moisture content in the material corresponding to a temperature of 20 °C and a relative humidity of the surrounding air only exceeding 65 % for a few weeks per year. Boards of this type are only suitable for use in biological hazard class 1 of EN 335 3. Humid conditions are defined in terms of service class 2 of EN 1995-1-1, which is characterised by a moisture content in the material corresponding to a temperature of 20 °C and a relative humidity of the surrounding air only exceeding 85 % for a few weeks per year.
NOTE 2   This standard will be referred to in EN 13986, as far as construction applications are concerned.
NOTE 3   Boards in accordance with this standard may be referred to as FB1, FB2, FB3 or FB4 boards.
The values listed in this standard relate to product properties but they are not characteristic values to be used for design calculations.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day