EN 12274-2:2003
(Main)Slurry surfacing - Test methods - Part 2: Determination of residual binder content
Slurry surfacing - Test methods - Part 2: Determination of residual binder content
This Draft European Standard describes the apparatus and the procedure for the extraction test to determine the residual binder content for samples of Slurry mixes. This Draft European Standard also describes the apparatus and the procedure for removal of the water from the samples before carrying out the extraction test. This method can only be used to determine the quantity of binder and not to investigate its quality.
Dünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 2: Bestimmung des Bindemittelgehaltes
Dieser Europäische Norm-Entwurf beschreibt die Prüfeinrichtungen und die Durchführung der Extraktionsprüfung zur Bestimmung des Bindemittelgehaltes von Proben aus Mischgut. Dieser Europäische Norm-Entwurf beschreibt auch die Prüfeinrichtungen und die Durchführung, um vor der Extraktionsprüfung das Wasser aus den Proben zu entfernen. Dieses Verfahren kann nur angewendet werden,um die Menge des Bindemittels zu bestimmen, jedoch nicht zur Untersuchung seiner Qualität.
Matériaux bitumineux coulés à froid - Méthode d'essai - Partie 2: Détermination de la teneur en liant résiduel
La présente Norme européenne précise les exigences concernant les mesures sur les bogies à trois essieux, qui assurent que les opérations de mesure sont effectuées en fonction de critères unifiés. Elle est applicable aux bogies à trois essieux neufs ou modifiés.
Les prescriptions allant au-delà du domaine d'application et de ses exigences font l'objet d'un contrat particulier entre les parties concernées.
Les opérations de mesure se rapportent aux châssis dans leur totalité avec ou sans superstructure, ou à certaines parties de ceux-ci lorsque leur conception géométrique ne permet pas de faire autrement. Il y a lieu, le cas échéant, de procéder à des opérations de mesure supplémentaires, non prévues ici, qui sont déterminées au cas par cas.
Obnovitev površine z emulzijo – Preskusne metode - 2. del: Ugotavljanje deleža ostankov veziva
General Information
- Status
- Withdrawn
- Publication Date
- 28-Jan-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 227 - Road materials
- Drafting Committee
- CEN/TC 227/WG 2 - Surface dressing and slurry surfacing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Mar-2018
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 04-Jun-2014
Frequently Asked Questions
EN 12274-2:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Slurry surfacing - Test methods - Part 2: Determination of residual binder content". This standard covers: This Draft European Standard describes the apparatus and the procedure for the extraction test to determine the residual binder content for samples of Slurry mixes. This Draft European Standard also describes the apparatus and the procedure for removal of the water from the samples before carrying out the extraction test. This method can only be used to determine the quantity of binder and not to investigate its quality.
This Draft European Standard describes the apparatus and the procedure for the extraction test to determine the residual binder content for samples of Slurry mixes. This Draft European Standard also describes the apparatus and the procedure for removal of the water from the samples before carrying out the extraction test. This method can only be used to determine the quantity of binder and not to investigate its quality.
EN 12274-2:2003 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12274-2:2003 has the following relationships with other standards: It is inter standard links to EN 12274-2:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12274-2:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12274-2:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Obnovitev površine z emulzijo –
Preskusne metode - 2. del: Ugotavljanje deleža ostankov vezivaDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 2: Bestimmung des BindemittelgehaltesMatériaux bitumineux coulés a froid - Méthode d'essai - Partie 2: Détermination de la teneur en liant résiduelSlurry surfacing - Test methods - Part 2: Determination of residual binder content93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12274-2:2003SIST EN 12274-2:2004en01-junij-2004SIST EN 12274-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12274-2January 2003ICS 93.080.20English versionSlurry surfacing - Test methods - Part 2: Determination ofresidual binder contentMatériaux bitumineux coulés à froid - Méthode d'essai -Partie 2: Détermination de la teneur en liant résiduelDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil2: Bestimmung des BindemittelgehaltesThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12274-2:2003 ESIST EN 12274-2:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...