iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 958:1996

(Main)

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods

This standard specifies safety requirements and test methods for energy absorbing systems for use in climbing on a klettersteig (via ferrata).

Bergsteigerausrüstung - Fangstoßdämpfer für die Verwendung auf Klettersteigen - Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Fangstoßdämpfer fest, die auf Klettersteigen verwendet werden.

Equipement d'alpinisme et d'escalade - Absorbeurs d'énergie utilisés en Via Ferrata - Exigences de sécurité et méthodes d'essai

La présente norme européenne spécifie les exigences de sécurité et les méthodes d'essai pour les absorbeurs d'énergie utilisés en escalade sur les "via ferrata".

Gorniška oprema – Sistemi za absorpcijo energije za uporabo pri zahtevnem varovanem plezanju (via ferrata) – Varnostne zahteve in preskusne metode

General Information

Status
Withdrawn
Publication Date
22-Oct-1996
Withdrawal Date
05-Dec-2006
ICS
97.220.40 - Outdoor and water sports equipment
Technical Committee
CEN/TC 136 - Sports, playground and other recreational equipment
Drafting Committee
CEN/TC 136/WG 5 - Mountaineering and climbing equipment
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Dec-2006
Completion Date
06-Dec-2006
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN 958:1998 - Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods

Relations

Replaced By
EN 958:2006 - Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
Effective Date
22-Dec-2008

Buy Standard

EN 958:1998EN 958:1998
PreviousNext
Standard
EN 958:1998
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 958:1998
01-september-1998
Gorniška oprema – Sistemi za absorpcijo energije za uporabo pri zahtevnem
varovanem plezanju (via ferrata) – Varnostne zahteve in preskusne metode
Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata)
climbing - Safety requirements and test methods
Bergsteigerausrüstung - Fangstoßdämpfer für die Verwendung auf Klettersteigen -
Sicherheitstechnische Anforderungen und Prüfverfahren
Equipement d'alpinisme et d'escalade - Absorbeurs d'énergie utilisés en Via Ferrata -
Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 958:1996
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
SIST EN 958:1998 en
2003-01.Slovenski inštitut za standardizacij
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 564:2023(Main)
Mountaineering equipment - Accessory cords - Safety requirements and test methods
SIST EN 564:2023

This document specifies safety requirements and test methods for accessory cords, supplied on a drum or in separate lengths, for use in mountaineering including climbing.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 892:2012+A3:2023(Main + Amendment)
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
SIST EN 892:2012+A3:2023

This European Standard specifies safety requirements and test methods for dynamic ropes (single, half and twin ropes) in kernmantel construction for use in mountaineering including climbing.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13089:2011+A3:2023(Main + Amendment)
Mountaineering equipment - Ice-tools - Safety requirements and test methods
SIST EN 13089:2011+A3:2023

This European Standard specifies safety requirements and test methods for ice-tools for use in mountaineering including climbing, and as a buried anchor for protection against falls.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 926-2:2013+A1:2021(Main + Amendment)
Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics
SIST EN 926-2:2014+A1:2022

2020-08-31 - Awaiting resolution of technical issues with TC.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12491:2015+A1:2021(Main + Amendment)
Paragliding equipment - Emergency parachutes - Safety requirements and test methods
SIST EN 12491:2016+A1:2022

This European Standard is applicable to emergency parachutes deployed by the action of the pilot without any other assistance (mechanical or pyrotechnic), intended for use with single seater or two seater paragliders.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17520:2021(Main)
Mountaineering equipment - Personal belay lanyards - Safety requirements and test methods
SIST EN 17520:2022

This document specifies safety requirements and test methods for lanyards intended to be the primary connection between the climber and the belay stance with the ability to withstand a dynamic impact. Lanyards intended only for positioning (e.g. daisy chain) or energy absorption in via ferrata or lanyards for rope courses are not covered by this document.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17109:2020(Main)
Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods
SIST EN 17109:2020

This document specifies safety requirements and test methods for components of an individual safety system for protection against a fall from height used in permanent and mobile rope courses as defined in EN 15567 1.
The products considered in this standard are not intended to limit, by themselves, the deceleration of the fall of the user, as defined in EN 15567 1. For this requirement, it is essential to consider the whole ropes course system.
Safety lines and harness are not covered in this standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17232:2020(Main)
Water play equipment and features - Safety requirements, test methods and operational requirements
SIST EN 17232:2020

This document specifies safety requirements, test methods and operational requirements for water play equipment, features and structures:
- intended for playing, and
- in areas intended for water activities for public use (non-domestic), typically in swimming pool facilities, and
- where water is an integral part in the use of the play equipment/feature/structures.
This document also applies for spray parks.
This document does not apply to:
a)   floating leisure articles according to EN ISO 25649 series;
b)   artificial climbing walls according to EN 12572 series;
c)   toys according to EN 71 series;
d)   water slides according to EN 1069 series;
e)   climbing/bouldering walls used in the swimming pool surround according to EN 17164;
f)   water equipment/features (e.g. ornamental fountains) not intended for playing;
g)   water play equipment/features installed in swimming pools for domestic use.
h)   playground equipment according to EN 1176 series.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21853:2020(Main)
Kite boarding - Release system - Safety requirements and test methods (ISO 21853:2020)
SIST EN ISO 21853:2020

This document specifies the minimum safety requirement and test methods for a release system that reduces the pulling force of the kite and disconnects the user from the kite.
This document is applicable for release systems which are operated intentionally by the user or another person, and are used for the sport of kite boarding.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1651:2018+A1:2020(Main + Amendment)
Paragliding equipment - Harnesses - Safety requirements and strength tests
SIST EN 1651:2018+A1:2020

This European Standard is applicable only to harnesses for paragliders. The intermediate attachment system between the harness and the paraglider does not form part of this standard.
This Standard specifies safety requirements and test methods.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day