EN 3375-006:2006

SLOVENSKI STANDARD
01-maj-2009
$HURQDYWLND(OHNWULþQLNDEOL]DGLJLWDOQLSUHQRVSRGDWNRYGHO(QRMQLRSOHW
RKPRY7LS;06WDQGDUG]DSURL]YRG
Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid
- 78 Ohms - Type XM - Product standard
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 006:
Einzel geschirmt - 78 Ohm - Type XM - Produktnorm
Série aérospatiale - Câbles électriques pour transmission de données numériques -
Partie 006 : Simple tresse - 78 Ohms - Type XM - Norme de produit
Ta slovenski standard je istoveten z: EN 3375-006:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3375-006
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 49.060
English Version
Aerospace series - Cable, electrical, for digital data transmission
- Part 006: Single braid - 78 Ohms - Type XM - Product standard
Série aérospatiale - Câbles électriques pour transmission Luft- und Raumfahrt - Elektrische Leitungen für
de données numériques - Partie 006 : Simple tresse - 78 Digitaldatenübertragungen - Teil 006: Einzel geschirmt - 78
Ohms - Type XM - Norme de produit Ohms - Type XM - Produktnorm
This European Standard was approved by CEN on 28 August 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3375-006:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Required characteristics.4
5 Tests.6
6 Quality assurance.9
7 Identification and marking (according to EN 3375-002 and TR 6058) .9
8 Packaging .10
9 Technical specification .10

Foreword
This document (EN 3375-006:2006) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at
the latest by June 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.

1 Scope
This standard specifies the required characteristics of single braid, 78 Ohms, size 24 electrical cable type XM,
intended for digital data transmissions.
Main electrical characteristics are given in 4.3.
It shall be used together with EN 3375-001 and EN 3375-002.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard.
EN 2084, Aerospace series — Cables, electric, single-core, general purpose, with conductors in copper or
copper alloy — Technical specification.
EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed — Technical
specification.
1)
EN 3375-001, Aerospace series — Cable, electrical, for digital data transmission — Technical specification.
1)
EN 3375-002, Aerospace series — Cable, electrical, for digital data transmission — General.
*
EN 3475-100 , Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General.
EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace
standard parts.
2)
TR 6058, Aerospace series — Cable code and identification list.
3 Terms and definitions
For the purposes of this standard, the terms and definitions given in EN 3475-100 apply.
4 Required characteristics
4.1 Dimensions and mass
See Figure 1 and Table 1.
*
And all parts quoted in this standard.
1) Published as ASD Prestandard at the date of publication of this standard.
2) Published as ASD Technical Report at the date of publication of this standard.
SIST EN 33
...