Structural bearings - Part 6: Rocker bearings

This document specifies rules for the design, testing and manufacture of point and line rocker bearings.
It is applicable to rocker bearings manufactured from carbon steel or cast steel or cast iron or stainless steel.
This document will be used in conjunction with the relevant parts of this standard series.

Lager im Bauwesen - Teil 6: Kipplager

Dieses Dokument legt Regeln für die Bemessung, Prüfung und Herstellung von Punkt- und Linienkipplagern fest.
Das Dokument gilt für aus unlegiertem Stahl, Gussstahl, Gusseisen oder nichtrostendem Stahl hergestellte Kipplager.
Dieses Dokument wird in Kombination mit den anderen relevanten Teilen dieser Normenreihe verwendet.

Appareils d’appui structuraux - Partie 6 : Appareils d’appui à balanciers

Le présent document spécifie les règles de conception, d’essai et de fabrication d’appareils d’appui à balancier à contact ponctuel ou linéaire.
Il s’applique aux appareils d’appui à balancier en acier au carbone, en fonte d’acier, en fonte ou en acier inoxydable.
Ce document sera utilisé conjointement aux parties pertinentes de cette série de normes.

Konstrukcijska ležišča - 6. del: Linijska in točkovna zasučna ležišča

General Information

Status
Not Published
Publication Date
02-Sep-2019
Withdrawal Date
02-Mar-2020
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
18-Sep-2020

Relations

Buy Standard

Draft
prEN 1337-6:2018
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2018
.RQVWUXNFLMVNDOHåLãþDGHO/LQLMVNDLQWRþNRYQD]DVXþQDOHåLãþD
Structural bearings - Part 6: Rocker bearings
Lager im Bauwesen - Teil 6: Kipplager
Ta slovenski standard je istoveten z: prEN 1337-6
ICS:
91.010.30 7HKQLþQLYLGLNL Technical aspects
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2018
ICS 91.010.30 Will supersede EN 1337-6:2004
English Version
Structural bearings - Part 6: Rocker bearings
Lager im Bauwesen - Teil 6: Kipplager
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 167.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1337-6:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 6
4 Types of rocker bearings . 7
4.1 General . 7
4.2 Line rocker bearing . 7
4.3 Point rocker bearing . 8
5 Materials . 9
5.1 Material for rockers and rocker plates . 9
5.1.1 General . 9
5.1.2 Carbon steel. 9
5.1.3 Stainless steel . 9
5.1.4 Cast steel . 9
5.1.5 Cast iron . 9
5.2 Materials for other components . 9
6 Design . 10
6.1 General . 10
6.2 Curved surfaces. 10
6.3 Load bearing capacity . 10
6.3.1 Vertical loads . 10
6.3.2 Eccentricities . 12
6.4 Behaviour under horizontal loads . 14
6.5 Load distribution to adjacent structural components . 14
6.6 Movements . 14
6.6.1 Translation capability . 14
6.6.2 Rotation capacity . 14
6.7 Corrosion in the contact line or point . 14
6.8 Combination with other bearings or elements . 14
7 Testing . 15
7.1 Surface roughness . 15
7.2 Resilience . 15
7.3 Hardness . 15
7.4 Deformation properties . 15
7.5 Non-destructive testing. 15
8 Manufacturing, assembly, tolerances, marking and labelling . 15
8.1 General . 15
8.2 Material requirements . 15
8.3 Carbon steel. 15
8.4 Flatness of the rocker plates . 15
8.5 Surface profile . 16
8.6 Surface roughness . 16
8.7 Parallelism of contact surfaces . 16
8.8 Marking and labelling . 16
9 Transport, storage and installation . 16
10 In-service inspection . 17
11 Maintenance . 17
12 Assessment and verification of constancy of performance . 17
12.1 General . 17
12.2 Type Testing . 17
12.3 Factory production control . 17
12.4 Assessment of the performance of the construction product . 17
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 19
ZA.1 Scope and relevant characteristics . 19
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 21
ZA.3 Assignment of AVCP tasks . 21
Bibliography . 24

European foreword
This document (prEN 1337-6:2018) has been prepared by Technical Committee CEN/TC 167
“Structural bearings”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1337-6:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Regulation 305/2011.
For relationship with EU Regulation 305/2011, see informative Annex ZA, which is an integral part of
this document.
prEN 1337, Structural bearings, consist of the following 8 parts:
— Part 1: General;
— Part 2: Sliding elements;
— Part 3: Elastomeric bearings;
— Part 4: Roller bearings;
— Part 5: Pot bearings;
— Part 6: Rocker bearings;
— Part 7: Spherical and cylindrical PTFE bearings;
— Part 8: Guide bearings and Restraint bearings.
The major technical changes are listed below:
— Complete technical and editorial revision of the document; it is not possible to list all implemented
changes to this edition of EN 1337-6.
1 Scope
This document specifies rules for the design, testing and manufacture of point and line rocker bearings.
It is applicable to rocker bearings manufactured from carbon steel or cast steel or cast iron or stainless
steel.
This document will be used in conjunction with the relevant parts of this standard series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 1337-1:2018, Structural bearings — Part 1: General
prEN 1337-2:2018, Structural bearings — Part 2: Sliding elements
prEN 1337-3:2018, Structural bearings — Part 3: Elastomeric bearings
prEN 1337-4:2018, Structural bearings — Part 4: Roller bearings
prEN 1337-5:2018, Structural bearings — Part 5: Pot bearings
prEN 1337-7:2018, Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
prEN 1337-8:2018, Structural bearings — Part 8: Guide bearings and Restraint bearings
EN 1993 (all parts), Euroc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.