EN 15347:2007
(Main)Plastics - Recycled Plastics - Characterisation of plastics wastes
Plastics - Recycled Plastics - Characterisation of plastics wastes
This European Standard provides a scheme for the characterisation of plastics wastes, laying out those properties for which the supplier of the waste shall make information available to the purchaser, and identifying test methods where applicable. The scheme provides for a division of information between "Required Data", where a statement is required, even if it is "unclassified", and additional "Optional Data" which the supplier may choose to provide if it adds value to the waste.
This standard is applicable without prejudice to any existing legislation.
NOTE This standard does not cover the characterisation of plastics recyclates.
Kunststoffe - Kunststoff-Rezyklate - Charakterisierung von Kunststoffabfällen
Diese Europäische Norm liefert ein Schema für die Charakterisierung von Kunststoffabfällen, wonach jene Eigenschaften umrissen werden, für die der Lieferant des Abfalls dem Käufer Informationen zugänglich machen und, falls anwendbar, Prüfverfahren für deren Identifizierung angeben muss. Das Schema sorgt für eine Unter¬scheidung der Informationen zwischen „Geforderten Daten“, für die eine Angabe gefordert wird, auch wenn sie „nicht klassifiziert“ lautet, und zusätzlichen „Freiwilligen Daten“, die der Lieferant wahlweise bereitstellen kann, wenn das den Wert des Abfalls erhöht.
Diese Norm beeinträchtigt bei ihrer Anwendung keinerlei geltende Vorschriften.
ANMERKUNG Die vorliegende Norm befasst sich nicht mit der Charakterisierung von Kunststoff-Rezyklaten.
Plastiques - Plastiques recyclés - Caractérisation des déchets de plastiques
La présente Norme européenne donne un cadre relatif la caractérisation des déchets de plastiques,
présentant des propriétés pour lesquelles le fournisseur de ces déchets doit mettre des informations à la
disposition de l'acheteur, et le cas échéant, identifier des méthodes d'essai. Le cadre scinde les informations
en « Données requises », pour lesquelles un état est demandé, même s'il est « non classé », et en
« Données optionnelles » supplémentaires, que le fournisseur peut choisir de fournir, s'il elles valorisent les
déchets.
La présente norme est applicable sans préjudice de toute réglementation existante.
NOTE La présente norme ne couvre pas la caractérisation des recyclats de plastiques.
Polimerni materiali - Reciklirani polimerni materiali - Karakterizacija odpadkov polimernih materialov
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastics - Recycled Plastics - Characterisation of plastics wastesPolimerni materiali - Reciklirani polimerni materiali - Karakterizacija odpadkov polimernih materialovPlastiques - Plastiques recyclés - Caractérisation des déchets de plastiquesKunststoffe - Kunststoff-Rezyklate - Charakterisierung von KunststoffabfällenTa slovenski standard je istoveten z:EN 15347:2007SIST EN 15347:2008en,fr,de83.080.0113.030.50ICS:SLOVENSKI
STANDARDSIST EN 15347:200801-februar-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15347December 2007ICS 13.030.50; 83.080.01 English VersionPlastics - Recycled Plastics - Characterisation of plastics wastesPlastiques - Plastiques recyclés - Caractérisation desdéchets de plastiquesKunststoffe - Kunststoff-Rezyklate - Charakterisierung vonKunststoffabfällenThis European Standard was approved by CEN on 25 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15347:2007: E
EN 15342 Plastics—Recycled Plastics—Characterization of polystyrene (PS) recyclates EN 15343 Plastics—Recycled Plastics—Plastics recycling traceability and assessment of conformity and recycled content EN 15344 Plastics—Recycled Plastics—Characterisation of Polyethylene (PE) recyclates EN 15345 Plastics—Recycled Plastics—Characterisation of Polypropylene (PP) recyclates EN 15346 Plastics—Recycled plastics—Characterisation of poly(vinyl chloride) (PVC) recyclates EN 15347 Plastics—Recycled Plastics—Characterisation of plastics waste
EN 15348 Plastics—Recycled plastics—Characterization of poly(ethylene terephthalate) (PET) recyclates CEN/TR 15353 Plastics—Recycled plastics—Guidelines for the development of standards for recycled plastics According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
It is possible that during this period contamination with other materials may occur that could affect the product's suitability for recycling into the intended application.
1 Scope This European Standard provides a scheme for the characterisation of plastics wastes, laying out those properties for which the supplier of the waste shall make information available to the purchaser, and identifying test methods where applicable. The scheme provides for a division of information between "Required Data", where a statement is required, even if it is "unclassified", and additional "Optional Data" which the supplier may choose to provide if it adds value to the waste.
This standard is applicable without prejudice to any existing legislation. NOTE This standard does not cover the characterisation of plastics recyclates. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12099, Plastics piping systems — Polyethylene piping materials and components — Determination of volatile content EN 15343, Plastics — Recycled Plastics — Plastics recycling traceability and assessment of conformity and recycled content EN ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test (ISO 179-1:2000) EN ISO 179-2, Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test (ISO 179-2:1997) EN ISO 180, Plastics — Determination of Izod impact strength (ISO 180:2000) EN ISO 306, Plastics — Thermoplastics materials — Determination of Vicat softening temperature (VST) (ISO 306:2004) EN ISO 472:2001, Plastics — Vocabulary (ISO 472:1999) EN ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles (ISO 527-1:1993 including Corr 1:1994) EN ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion pla
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.