EN ISO 374-1:2016/A1:2018

SLOVENSKI STANDARD
01-november-2018
9DURYDOQHURNDYLFH]D]DãþLWRSUHGQHYDUQLPLNHPLNDOLMDPLLQPLNURRUJDQL]PL
GHO,]UD]MHLQ]DKWHYDQHODVWQRVWL]D]DãþLWRSUHGNHPLþQLPLWYHJDQML'RSROQLOR
$,62$PG
Protective gloves against dangerous chemicals and micro-organisms - Part 1:
Terminology and performance requirements for chemical risks - Amendment 1 (ISO 374-
1:2016/Amd 1:2018)
Schutzhandschuhe gegen gefährliche Chemikalien und Mikroorganismen - Teil 1:
Terminologie und Leistungsanforderungen für chemische Risiken - Änderung 1 (ISO 374
-1:2016/Amd 1:2018)
Gants de protection contre les produits chimiques dangereux et les micro-organismes -
Partie 1: Terminologie et exigences de performance pour les risques chimiques -
Amendement 1 (ISO 374-1:2016/Amd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 374-1:2016/A1:2018
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.340.40 Varovanje dlani in rok Hand and arm protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 374-1:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2018
EUROPÄISCHE NORM
ICS 13.340.40
English Version
Protective gloves against dangerous chemicals and micro-
organisms - Part 1: Terminology and performance
requirements for chemical risks - Amendment 1 (ISO 374-
1:2016/Amd 1:2018)
Gants de protection contre les produits chimiques Schutzhandschuhe gegen gefährliche Chemikalien und
dangereux et les micro-organismes - Partie 1: Mikroorganismen - Teil 1: Terminologie und
Terminologie et exigences de performance pour les Leistungsanforderungen für chemische Risiken -
risques chimiques - Amendement 1 (ISO 374- Änderung 1 (ISO 374-1:2016/Amd 1:2018)
1:2016/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 374-1:2016; it was approved by CEN on 20 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 374-1:2016/A1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (EN ISO 374-1:2016/A1:2018) has been prepared by Technical Committee ISO/TC 94
“Personal safety - Protective clothing and equipment” in collaboration with Technical Committee
CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of
which is held by DIN.
This Amendment to the European Standard EN ISO 374-1:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2019, and
conflicting national standards shall be withdrawn at the latest by January 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following coun
...