EN 12259-2:1999/A2:2005
(Amendment)Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
Modification to tolerances to allow alarm valves not in conformance to EN 12259-2 to come within the requirements of the standard.
Ortsfeste Löschanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen - Teil 2: Nassalarmventil mit Zubehör
Installations fixes de lutte contre l'incendie - Composants des systèmes d'extinction du type sprinkleur et à pulvérisation d'eau - Partie 2 : Systèmes de soupape d'alarme hydraulique
Vgrajene naprave za gašenje – Sestavni deli sprinklerskih sistemov in sistemov s pršečo vodo – 2. del: Mokri alarmni ventili
General Information
- Status
- Published
- Publication Date
- 22-Nov-2005
- Withdrawal Date
- 30-Aug-2007
- Technical Committee
- CEN/TC 191 - Fixed firefighting systems
- Drafting Committee
- CEN/TC 191/WG 5 - Sprinkler systems
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 23-Nov-2005
- Due Date
- 28-Sep-2006
- Completion Date
- 23-Nov-2005
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 12259-2:1999/A2:2005 is a CEN amendment covering wet alarm valve assemblies used in fixed firefighting systems for sprinkler and water spray systems. This amendment (A2) updates material, construction, performance, marking and corrosion-resistance requirements so that alarm valves that previously did not conform can be brought within the standard’s requirements. It supports harmonized national adoption across CEN members and relates to EU safety directives.
Key topics and technical requirements
- Materials and construction: Bodies and covers must be cast iron, bronze, brass, monel, stainless steel, titanium or materials with equivalent properties. Cover fasteners must be steel, stainless steel, titanium or equivalent. Non-metallic parts and low-melting metals used in bodies/covers are allowed only if the sealing assembly still opens fully per Annex A and the valve meets performance clauses.
- Fastener strength: Fastener design loads (excluding gasket compression) must meet tensile-strength criteria of ISO 898-1/2 or equivalent European standards when the valve is pressurized to 4× the rated working pressure; the standard defines how to calculate the pressure area depending on gasket type.
- Drain and connections: A drain connection downstream of the sealing assembly is mandatory with a minimum nominal size of 20 mm. The retard chamber must also have a connection of at least 20 mm for alarm devices.
- Non-metallic elements and bearings: After ageing (Annex F), non-metallic components must show no cracking and must meet leak-resistance and performance tests (C.1, J, E.2 as applicable).
- Clearances and corrosion protection: Sealing assembly bushings or hinge pin bearings must project sufficiently to maintain specified clearances (dimension A ≥ 1.5 mm where adjacent parts are not corrosion-resistant metals). Coatings must show no blistering, delamination, flaking or increased resistance when tested per Annex N.
- Marking: Mandatory marking methods, character sizes and label types are defined (e.g., cast marking heights and minimum projections per Table 1).
- Salt mist corrosion test (Annex N): Defines reagents (5 ± 0.5% NaCl), fog chamber parameters, spray pressure (0.7–1.7 bar), exposure (10 days at 35 ± 2 °C) and a 7-day drying period to evaluate coating deterioration.
Applications and who uses it
- Manufacturers of wet alarm valves and sprinkler components use EN 12259-2:1999/A2:2005 to design and certify products.
- Test laboratories perform the specified mechanical, leakage and corrosion tests.
- System designers, installers and maintenance teams use the standard to select compliant components and verify installation requirements (drain size, retard chamber connections, clearances).
- Specifiers, certifiers and procurement officers reference the standard when writing tender documents, approvals and compliance checks.
Related standards
- Part of the EN 12259 series for sprinkler and water spray system components (consult other parts of EN 12259 for complementary requirements).
- References to ISO 898 (tensile strength) are retained for fastener requirements or equivalent European standards.
Keywords: EN 12259-2:1999/A2:2005, wet alarm valve assemblies, fixed firefighting systems, sprinkler systems, salt mist corrosion test, valve marking, drainage requirements, CEN standard.
Frequently Asked Questions
EN 12259-2:1999/A2:2005 is a standard published by the European Committee for Standardization (CEN). Its full title is "Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies". This standard covers: Modification to tolerances to allow alarm valves not in conformance to EN 12259-2 to come within the requirements of the standard.
Modification to tolerances to allow alarm valves not in conformance to EN 12259-2 to come within the requirements of the standard.
EN 12259-2:1999/A2:2005 is classified under the following ICS (International Classification for Standards) categories: 13.220.20 - Fire protection; 13.320 - Alarm and warning systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12259-2:1999/A2:2005 has the following relationships with other standards: It is inter standard links to EN 12259-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12259-2:1999/A2:2005 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/109. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12259-2:1999/A2:2005 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2006
Vgrajene naprave za gašenje – Sestavni deli sprinklerskih sistemov in sistemov s
pršečo vodo – 2. del: Mokri alarmni ventili
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2:
Wet alarm valve assemblies
Ortsfeste Löschanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen - Teil 2:
Nassalarmventil mit Zubehör
Installations fixes de lutte contre l'incendie - Composants des systemes d'extinction du
type sprinkleur et a pulvérisation d'eau - Partie 2 : Systemes de soupape d'alarme
hydraulique
Ta slovenski standard je istoveten z: EN 12259-2:1999/A2:2005
ICS:
13.220.10 Gašenje požara Fire-fighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12259-2:1999/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 13.220.20; 13.320
English Version
Fixed firefighting systems - Components for sprinkler and water
spray systems - Part 2: Wet alarm valve assemblies
Installations fixes de lutte contre l'incendie - Composants Ortsfeste Löschanlagen - Bauteile für Sprinkler- und
des systèmes d'extinction du type sprinkleur et à Sprühwasseranlagen - Teil 2: Nassalarmventil mit Zubehör
pulvérisation d'eau - Partie 2 : Systèmes de clapet d'alarme
sous eau
This amendment A2 modifies the European Standard EN 12259-2:1999; it was approved by CEN on 19 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12259-2:1999/A2:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
2 Normative references .4
4 Wet alarm valve assembly construction and performance.4
4.4 Body and cover .4
4.5 Drain.4
4.6.5 Materials for seat rings and bearing surfaces .4
4.7 Non-metallic elements (excluding gaskets and seals).5
4.9 Clearances.5
5 Retard chamber construction and performance .5
5.5 Connections .5
6 Marking .5
6.1 General .5
Annex N (normative) Salt mist corrosion test .7
N.1 Reagents.7
N.2 Apparatus .7
N.3 Procedure .7
Foreword
This European Standard (EN 12259-2:1999/A2:2005) has been prepared by Technical Committee
CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 12259-2:1999 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national
standards shall be withdrawn at the latest by August 2007.
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European
Standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
2 Normative references
Delete the following reference:
ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads – Part 1: Dimensions,
tolerances and designation.
4 Wet alarm valve assembly construction and performance
4.4 Body and cover
Replace 4.4.1.1 with the fol
...
SLOVENSKI STANDARD
01-april-2006
9JUDMHQHQDSUDYH]DJDãHQMH±6HVWDYQLGHOLVSULQNOHUVNLKVLVWHPRYLQVLVWHPRYV
SUãHþRYRGR±GHO 0RNULDODUPQLYHQWLOL
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2:
Wet alarm valve assemblies
Ortsfeste Löschanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen - Teil 2:
Nassalarmventil mit Zubehör
Installations fixes de lutte contre l'incendie - Composants des systemes d'extinction du
type sprinkleur et a pulvérisation d'eau - Partie 2 : Systemes de soupape d'alarme
hydraulique
Ta slovenski standard je istoveten z: EN 12259-2:1999/A2:2005
ICS:
13.220.10 Gašenje požara Fire-fighting
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12259-2:1999/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 13.220.20; 13.320
English Version
Fixed firefighting systems - Components for sprinkler and water
spray systems - Part 2: Wet alarm valve assemblies
Installations fixes de lutte contre l'incendie - Composants Ortsfeste Löschanlagen - Bauteile für Sprinkler- und
des systèmes d'extinction du type sprinkleur et à Sprühwasseranlagen - Teil 2: Nassalarmventil mit Zubehör
pulvérisation d'eau - Partie 2 : Systèmes de clapet d'alarme
sous eau
This amendment A2 modifies the European Standard EN 12259-2:1999; it was approved by CEN on 19 October 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12259-2:1999/A2:2005: E
worldwide for CEN national Members.
Contents Page
Foreword .3
2 Normative references .4
4 Wet alarm valve assembly construction and performance.4
4.4 Body and cover .4
4.5 Drain.4
4.6.5 Materials for seat rings and bearing surfaces .4
4.7 Non-metallic elements (excluding gaskets and seals).5
4.9 Clearances.5
5 Retard chamber construction and performance .5
5.5 Connections .5
6 Marking .5
6.1 General .5
Annex N (normative) Salt mist corrosion test .7
N.1 Reagents.7
N.2 Apparatus .7
N.3 Procedure .7
Foreword
This European Standard (EN 12259-2:1999/A2:2005) has been prepared by Technical Committee
CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI.
This Amendment to the European Standard EN 12259-2:1999 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national
standards shall be withdrawn at the latest by August 2007.
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European
Standard.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
2 Normative references
Delete the following reference:
ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads – Part 1: Dimensions,
tolerances and designation.
4 Wet alarm valve assembly construction and performance
4.4 Body and cover
Replace 4.4.1.1 with the fol
...
EN 12259-2:1999/A2:2005は、スプリンクラーおよび水スプレーシステム用の固定消火システムに関する重要な標準であり、その中でも特に湿式アラームバルブアセンブリに焦点を当てています。この標準の主な範囲は、アラームバルブがEN 12259-2に準拠していない場合でも、そのトレランスの修正を通じて、標準の要求事項に適合させるための基準を定めています。 この標準の強みは、消火システムの安全性と信頼性を高めるために設計された柔軟性にあります。改正されたトレランスにより、既存の設計や製品が新しい基準により適合することが可能となり、業界の変化に対応できる機動性を提供します。これにより、湿式アラームバルブアセンブリの製造者やエンジニアは、より幅広い製品選択肢を持ちつつ、安全基準を遵守することができます。 また、EN 12259-2の特定の要件に従うことで、消火システムの性能が保証され、火災発生時の迅速な対応が可能になるため、公共や商業施設の安全性向上にも寄与します。この標準の重要性は増しており、技術の進歩や新しい規制に対応するため、常に見直しや改訂が求められています。 全体として、SIST EN 12259-2:2000/A2:2006は、湿式アラームバルブアセンブリに関連する規格の重要な側面を統合し、業界内での標準化を推進するための基盤を築く役割を果たしています。
SIST EN 12259-2:2000/A2:2006 표준은 고정 소방 시스템의 중요한 구성 요소인 스프링클러 및 물 스프레이 시스템에 대한 내용을 다루고 있습니다. 이 문서는 특히 습식 경고 밸브 조립품에 관한 절차와 기술적 요구 사항을 명확하게 정의하고 있습니다. 이 표준의 범위는 EN 12259-2에 부합하지 않는 경고 밸브가 표준의 요구 사항에 부합하도록 조정할 수 있는 허용 오차에 대한 수정 사항을 포함하고 있습니다. 이는 다양한 제조 공정과 설계가 존재하는 시스템을 통합할 수 있도록 하여 실제 운용 시 발생할 수 있는 문제를 최소화합니다. SIST EN 12259-2:2000/A2:2006의 강점 중 하나는 경고 시스템의 신뢰성을 높이는 데 초점을 맞추고 있다는 점입니다. 이 표준은 강화된 안전성을 제공하며, 다양한 조건에서의 동작을 보장하기 위해 설계된 포괄적인 기준을 제공합니다. 이를 통해 사용자는 소방 시스템의 성능을 극대화하고, 문제가 발생할 경우 신속하게 대응할 수 있는 기반을 마련할 수 있습니다. 또한, 이 표준은 국제적인 규정과 잘 맞물려 있어 글로벌 시장에서도 그 유용성과 신뢰성을 인정받고 있습니다. SOP(Standard Operating Procedure) 및 규정 준수를 위한 명확한 지침을 제공하여 업계의 모든 참가자가 높은 수준의 안전 기준을 유지하도록 도움을 줍니다. 이러한 점에서 SIST EN 12259-2:2000/A2:2006는 고정 소방 시스템의 설계 및 설치에 있어 매우 중요한 기준으로 자리 잡고 있습니다.
The standard EN 12259-2:1999/A2:2005 pertains to fixed firefighting systems, specifically focusing on components for sprinkler and water spray systems, with an emphasis on wet alarm valve assemblies. This standard plays a crucial role in ensuring the reliability and efficiency of firefighting systems, which are essential for fire safety in various environments. One of the key strengths of this standard is its provision for the modification of tolerances. By allowing alarm valves that do not conform to the original EN 12259-2 criteria to still comply with the amended requirements, the standard promotes greater flexibility in the adoption of wet alarm valve assemblies. This is particularly relevant in today's rapidly advancing technology landscape, where adherence to strict manufacturing tolerances can sometimes hinder innovation and the integration of new designs into existing systems. Furthermore, the standard's relevance extends to enhancing interoperability among different manufacturers' components, thereby ensuring that fire safety measures maintain a high degree of effectiveness regardless of the sources of the components used. It fosters a more inclusive approach in the industry, which can lead to an increase in supply chain efficiency by accommodating various specifications while still prioritizing safety. Overall, EN 12259-2:1999/A2:2005 is instrumental in calibrating the delicate balance between stringent safety requirements and the practicalities of manufacturing variabilities in wet alarm valve assemblies, ensuring that high standards for fixed firefighting systems are not only maintained but also evolve in tandem with industry needs.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...