EN ISO 294-4:2003/AC:2011
(Corrigendum)Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)
2011-04-15 EMA: Corrigendum issued in ISO in 2007 but missed in CEN. WI created in order to adopt the document.
Kunststoffe - Spritzgießen von Probekörpern aus Thermoplasten - Teil 4: Bestimmung der Verarbeitungsschwindung - Berichtigung 1 (ISO 294-4:2001/Cor 1:2007)
Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4: Détermination du retrait au moulage - Rectificatif technique 1 (ISO 294-4:2001/Cor 1:2007)
Polimerni materiali - Preskušanci iz plastomerov, oblikovani z injekcijskim vbrizgavanjem - 4. del: Določitev skrčka pri oblikovanju - Tehnični popravek 1 (ISO 294-4:2001/Cor 1:2007)
Opredeljuje metodo določitve skrčka pri oblikovanju in skrčka po oblikovanju preskušancev iz plastomerov, oblikovanih z injekcijskim vbrizgavanjem, vzporedno in pravokotno na smer toka taline.
General Information
- Status
- Withdrawn
- Publication Date
- 14-Jun-2011
- Withdrawal Date
- 27-Nov-2012
- Technical Committee
- CEN/TC 249 - Plastics
- Drafting Committee
- CEN/TC 249 - Plastics
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Nov-2012
- Completion Date
- 28-Nov-2012
Relations
- Effective Date
- 13-Feb-2019
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 294-4:2003/AC:2011 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)". This standard covers: 2011-04-15 EMA: Corrigendum issued in ISO in 2007 but missed in CEN. WI created in order to adopt the document.
2011-04-15 EMA: Corrigendum issued in ISO in 2007 but missed in CEN. WI created in order to adopt the document.
EN ISO 294-4:2003/AC:2011 is classified under the following ICS (International Classification for Standards) categories: 83.080.20 - Thermoplastic materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 294-4:2003/AC:2011 has the following relationships with other standards: It is inter standard links to EN ISO 294-4:2019, EN ISO 294-4:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 294-4:2003/AC:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.MHNFLMVNLPKunststoffe - Spritzgießen von Probekörpern aus Thermoplasten - Teil 4: Bestimmung der Verarbeitungsschwindung - Berichtigung 1 (ISO 294-4:2001/Cor 1:2007)Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4: Détermination du retrait au moulage - Rectificatif technique 1 (ISO 294-4:2001/Cor 1:2007)Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)83.080.20PlastomeriThermoplastic materialsICS:Ta slovenski standard je istoveten z:EN ISO 294-4:2003/AC:2011SIST EN ISO 294-4:2003/AC:2011en,fr,de01-september-2011SIST EN ISO 294-4:2003/AC:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 294-4:2003/AC
June 2011
Juin 2011
Juni 2011 ICS 83.080.20 English version Version Française Deutsche Fassung
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage - Technical Corrigendum 1 (ISO 294-4:2001/Cor 1:2007)
Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4: Détermination du retrait au moulage - Rectificatif technique 1 (ISO 294-4:2001/Cor 1:2007)
Kunststoffe - Spritzgießen von Probekörpern aus Thermoplasten - Teil 4: Bestimmung der Verarbeitungsschwindung (ISO 294-4:2001/Cor 1:2007) This corrigendum becomes effective on 15 June 2011 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 15 juin 2011 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 15.Juni 2011 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...