EN 10137-1:1995
(Main)Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions
1.1 This European Standard spe~fies requirements for plates and wide flats of high yield strength alloy special steels. Part 1 of this European Standard specifies the general delivery conditions. Part 2 of this European Standard specifies the delivery conditions for quenched and tempered steels in the grades and qualities given in table 1(chemical composition) and tables 2 and 3 (mechanical properties) of Part 2. Part 3 of this European Standard specifies the delivery conditions for precipitation hardened steels in the grades and qualities given in table 1 (chemical composition) and tables 2 and 3 (mechanical properties)of Part 3. The steels specified in this European Standard are especially intended for use in heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks, buildings, crane structures, etc. for service at ambient and low temperatures. 1.2 This European Standard does not apply to products for pressure vessels and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications exist or are being prepared: - Hot-rolled products of non-alloy structural steels - (see EN 10025). - Semi-finished products for forging in general purpose structural steels - (see EURONORM 30). - Weldable fine grain structural steels - (see EN 10113 Parts 1 - 3). - Structural steels with improved atmospheric corrosion resistance -(see EN 10155). - Flat products in high yield strength steels for cold forming - wide flats, sheet/plate, wide and narrow strip - (see EN 10149 Parts 1 - 3). - Steels for shipbuilding - normal and high strength qualities - (see EURONORM 156). - Hot finished structural hollow sections (see EN 10210-1).
Blech und Breitflachstahl aus Baustählen mit höherer Streckgrenze im vergüteten oder im ausscheidungsgehärteten Zustand - Teil 1: Allgemeine Lieferbedingungen
Diese Europäische Norm enthält die Anforderungen an Blech und Breitflachstahl aus legierten Edelstählen mit höherer Streckgrenze. Teil 1 dieser Europäischen Norm enthält die allgemeinen Lieferbedingungen. Teil 2 dieser Europäischen Norm enthält die Lieferbedingungen für vergütete Stähle der Sorten und Gütegruppen nach Tabelle 1 (chemische Zusammensetzung) sowie nach d den Tabellen 2 und 3 (mechanische Eigenschaften) des Teils 2.
Tôles et larges plats en aciers de construction à haute limite d'élasticité à l'état trempé et revenu ou durci par précipitation - Partie 1: Conditions générales de livraison
La présente norme européenne spécifie les exigences pour les tôles et larges plats en aciers spéciaux alliés à haute limite d'élasticité. La partie 1 de la présente norme spécifie les conditions générales de livraison. La partie 2 de la présente norme européenne spécifie les conditions de livraison des aciers trempés et revenus dans les nuances et les qualités données au tableau 1 (composition chimique) at aux tableaux 2 et 3 (caractéristiques mécaniques) de la partie 2.
Plošče in široki trakovi iz konstrukcijskih jekel z veliko napetostjo tečenja v poboljšanem ali izločevalno utrjenem stanju - 1. del: Splošni dobavni pogoji
General Information
- Status
- Withdrawn
- Publication Date
- 19-Sep-1995
- Withdrawal Date
- 09-Nov-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Nov-2004
- Completion Date
- 10-Nov-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10137-1:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions". This standard covers: 1.1 This European Standard spe~fies requirements for plates and wide flats of high yield strength alloy special steels. Part 1 of this European Standard specifies the general delivery conditions. Part 2 of this European Standard specifies the delivery conditions for quenched and tempered steels in the grades and qualities given in table 1(chemical composition) and tables 2 and 3 (mechanical properties) of Part 2. Part 3 of this European Standard specifies the delivery conditions for precipitation hardened steels in the grades and qualities given in table 1 (chemical composition) and tables 2 and 3 (mechanical properties)of Part 3. The steels specified in this European Standard are especially intended for use in heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks, buildings, crane structures, etc. for service at ambient and low temperatures. 1.2 This European Standard does not apply to products for pressure vessels and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications exist or are being prepared: - Hot-rolled products of non-alloy structural steels - (see EN 10025). - Semi-finished products for forging in general purpose structural steels - (see EURONORM 30). - Weldable fine grain structural steels - (see EN 10113 Parts 1 - 3). - Structural steels with improved atmospheric corrosion resistance -(see EN 10155). - Flat products in high yield strength steels for cold forming - wide flats, sheet/plate, wide and narrow strip - (see EN 10149 Parts 1 - 3). - Steels for shipbuilding - normal and high strength qualities - (see EURONORM 156). - Hot finished structural hollow sections (see EN 10210-1).
1.1 This European Standard spe~fies requirements for plates and wide flats of high yield strength alloy special steels. Part 1 of this European Standard specifies the general delivery conditions. Part 2 of this European Standard specifies the delivery conditions for quenched and tempered steels in the grades and qualities given in table 1(chemical composition) and tables 2 and 3 (mechanical properties) of Part 2. Part 3 of this European Standard specifies the delivery conditions for precipitation hardened steels in the grades and qualities given in table 1 (chemical composition) and tables 2 and 3 (mechanical properties)of Part 3. The steels specified in this European Standard are especially intended for use in heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks, buildings, crane structures, etc. for service at ambient and low temperatures. 1.2 This European Standard does not apply to products for pressure vessels and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications exist or are being prepared: - Hot-rolled products of non-alloy structural steels - (see EN 10025). - Semi-finished products for forging in general purpose structural steels - (see EURONORM 30). - Weldable fine grain structural steels - (see EN 10113 Parts 1 - 3). - Structural steels with improved atmospheric corrosion resistance -(see EN 10155). - Flat products in high yield strength steels for cold forming - wide flats, sheet/plate, wide and narrow strip - (see EN 10149 Parts 1 - 3). - Steels for shipbuilding - normal and high strength qualities - (see EURONORM 156). - Hot finished structural hollow sections (see EN 10210-1).
EN 10137-1:1995 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10137-1:1995 has the following relationships with other standards: It is inter standard links to EN 10025-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10137-1:1995 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10137-1:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blech und Breitflachstahl aus Baustählen mit höherer Streckgrenze im vergüteten oder im ausscheidungsgehärteten Zustand - Teil 1: Allgemeine LieferbedingungenTôles et larges plats en aciers de construction a haute limite d'élasticité a l'état trempé et revenu ou durci par précipitation - Partie 1: Conditions générales de livraisonPlates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions77.140.50SROL]GHONLFlat steel products and semi-products
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...